@@Pascal_Robert--Rc_Creations I actually ran a belt drive on my rc snowmobile with semi direct snow contact. I never made the side panel fit so in deeper snow it would be right up in the belt. Never had any issues, 3d printed pullies with a 3d printed TPU belt. It should work out great for you, good luck.
I have the skidoo rev I got it when I was younger but it is currently sitting torn apart because I hopefully will be allowed to get a conversation kit for it
Pascal - is funny that I have seen more of those super big Skidoo’s. I have one New here. I was hoping for a conversion kit but you said in your video not worth for 10 people... it is an old sled but some are around still. Converting mine to brushless but expect low reliability on the transmission.
I'm building that 2007 SkiDoo Rev 800 by interactive toys right now. I emailed you I was wondering if you sold the complete kit to make mine hobby grade. They're sweet! Awesome collection by the way!
Castle creation has a lot of awesome products, Depending on your budget I would either go for a 1/10 SCT combo, or a mamba X esc and 1410 motor. There is also a lot of good brands but these would be my 2 picks.
That's a nice collection. Not to rain on your parade, but you're also missing a swedish-made Atomic 2000 sled from 2000-ish. Other than that you've caught almost all of em👏
ur Alpha is looking sweet!!! im making mine look mostly like an alpha because im using a straight tunnel while you have the rear bend like the real chassis... I guess you can say my sled is more like the "Blast," Mountain Cat, chassis from Arctic Cat. I recently designed a new rear skid more accurate with both shocks off to the right side of the sled. *When do u think your official ALPHA video will come out???*
I have a whole Polaris all tore apart already if you want it. I wanted to make something fun out of it, watched your kits/parts but never devoted anymore time. I also have a whole still working Yamaha. In years past I have wrote Traxxas and others to make a snowmobile, so been paying attention to your videos for years.
I do remember seeing your previous messages! it's nice of you to stick around, it's very appreciated! Thanks for the offer, but i already have too many. You could list it for sale, i'm sure someone would be very happy to be getting that!
@@Pascal_Robert--Rc_Creations well you were talking about scavenging one of your complete ones. You can have this one. It would be good to see it go to good use. Pease make a Axys Pro and ill be a buyer when you offer a compete kit, even if its a SkiDoo. I have a long rc history.
Pascal thanks for everything! Ive been into all RC since '78, except these. I just bought my first one a Polaris Pro R 800 dead mint no radio. Can you please suggest upgrades like motor, pinions, esc, parts?
I suggest you have a look at the rush to rmk serie. It will give you a few ideas on what to do! For motors and esc, any system brushless 1/10 works well, but i like castle creations stuff. I also like the hobbywing g3 v10 motor 10.5t. Super light and plenty of power
@@Pascal_Robert--Rc_Creations Thanks for the super fast response and help Pascal. I get it my Polaris today! How can a noob tell the difference between the older, better Ski-doo and newer ski-doo? I have a feeling Ill want one of those soon.
I had the nitro version snowmobile I put a OS max 21 on it it was just a pain and dident float like I thought it would. The track is not aggressive enough. I put stainless steel homemade scoops kinda helped but the sparks are really cool
Where can you buy these snowmobiles and where did you buy all the parts,( if you want to sell one of your RC sleds let me know) BTW love the videos 👍👍👍👍👍👍👍👍
Are you still selling the conversation kits for the viper on your website? I just found these the other day and I am highly interested in upgrading it into something that's fun! Even the file would work if that's still available.
i have the 2 bigger ones by new bright the red and yellow that i have done the conversion to hobby grade components and i also have 2 of the smaller ones that u show at 14:20 but i have one red thats still stock and working and one yellow one thats for parts as its skis are broken
How much would you sell one of a custom made by me of a 2003 rev 440 chassis? I do not have a price range just whatever it would cost to get a fully working one built by you. They are sweet looking and would love to ad this to my sled collection stuff in my garage.
Problem is they raise the center of gravity alot and then it's always on its side since it doesnt shift its weight like a real rider. Any kind of speed turn is impossible with the stock rider on top.
Comment tu a faiiiiitt haha😅 le ski-doo 800 je le cherche partout sur internet et je n’en est jamais trouvé un😅 en fait j’en est trouver un neuf et juste avant que je l’achète il a été vendu😢 haha srx c’est vrm rendu cool tes projet continu demem c juste fous tout ce que tu fait😁
Men ! Il faut que tessaye de patanter une bras robotique sur le pont en arriere pour pouvoir contrôler une contre poid avec une télécommande a 6 canaux.. g une idee en tete sa serais tellement sick !!!!
Matériel nécessaire pour compléter ce kit. Modèle de base (jouet) de motoneige Quincaillerie: une tige de 3 mm (allu ou laiton), une tige de 6 mm (30 mm de long) Quatre ''colars'' 1/8 Un tas de vis (M2 & M3 ...) et rondelles Deux roulements 6x13x5 et deux (12x18x4) (les unités sont en mm). Un engrenage de 56 t et un pignon de 14 à 20 t de traxxas. (recherchez Traxxas # 3957) Un peu de super colle Un fil de calibre 16 (1,6 mm) (antirouille). Le fil a cloture fonctionne très bien. Amortisseurs: deux amortisseurs de 60 à 78 mm à l'avant, un de 55 à 60 mm au milieu et un de 70 à 80 mm à l'arrière. Une fine feuille d'acier ou d'aluminium pliée et coupée pour le tunnel. Dimensions dans la vidéo ... (Mon tunnel mesure environ 0,025 po d'épaisseur. Il pourrait être un peu plus épais en fait. En gros, vous pouvez le plier à la main, mais il n'est pas trop mou pour se plier tout seul.) Electronique, j'ai dans ma motoneige un combo Brushless SCT de Castle creations, un servo de direction exi (engrenage métallique important) et un combo émetteur de spectre dx2e et récepteur. Tout cela couplé à un 3s 2200 mAh de Gens Ace.
Nice work.👌 Here you have a swedish made rc snowmobil. Its a old retro model i think brp lynx rcskoter.se. I remember this rc sens i was small guy and now i thought about it when you make rc snowmobil.
Awesome video you do a great job of explaining the differences and similarities in the different sleds. Thank you.
Thanks Pascal ! Very impressive work You have done and I can not wait to see what is next ! I need to get busy ! haha !
Do you still have one of your sweet machines for sale?👀
I remember watching your videos a few years ago and your one of the reasons why I got my 3d printer
Keep the videos coming, always enjoy them, and to see what cool snowmobiles you are building next
hek yeah! you don't want to miss whats under that red cover! 💀
going back to belt drive for the alpha i see... im excited to see how it performs because i never used a belt driven sled before.
Neither have I (with direct snow contact), yay unexplored territory!
@@Pascal_Robert--Rc_Creations I actually ran a belt drive on my rc snowmobile with semi direct snow contact. I never made the side panel fit so in deeper snow it would be right up in the belt. Never had any issues, 3d printed pullies with a 3d printed TPU belt.
It should work out great for you, good luck.
I did a couple of large skidoos they worked very well and I used the kyosho blizzard tracks very nice and fast
I have the skidoo rev I got it when I was younger but it is currently sitting torn apart because I hopefully will be allowed to get a conversation kit for it
Pascal - is funny that I have seen more of those super big Skidoo’s. I have one New here. I was hoping for a conversion kit but you said in your video not worth for 10 people... it is an old sled but some are around still. Converting mine to brushless but expect low reliability on the transmission.
I have one stock all torn apart,... I need a gearbox and track for a polaris rush, like your first one
You should find a way to make a controllable rider for weight distribution
I'm building that 2007 SkiDoo Rev 800 by interactive toys right now. I emailed you I was wondering if you sold the complete kit to make mine hobby grade. They're sweet! Awesome collection by the way!
So, as someone who has the ski-doo @18:44, what motor and esc would you recommend.
Castle creation has a lot of awesome products, Depending on your budget I would either go for a 1/10 SCT combo, or a mamba X esc and 1410 motor. There is also a lot of good brands but these would be my 2 picks.
@@Pascal_Robert--Rc_Creations thank you,will check them out.
@@johnshobbies4224 where did you get it
Stealthy Gaming it was either. RCGroups or eBay. It was awhile ago.
@@johnshobbies4224 oh how much was it
wow. I'd love a Skidoo 850 just as a model!!
I have a Art Attack with .28 snowmobile!! I need go make upgrades before winter!
That's a nice collection. Not to rain on your parade, but you're also missing a swedish-made Atomic 2000 sled from 2000-ish. Other than that you've caught almost all of em👏
Find me one :D
ur Alpha is looking sweet!!! im making mine look mostly like an alpha because im using a straight tunnel while you have the rear bend like the real chassis... I guess you can say my sled is more like the "Blast," Mountain Cat, chassis from Arctic Cat. I recently designed a new rear skid more accurate with both shocks off to the right side of the sled. *When do u think your official ALPHA video will come out???*
December 25 is the deadline for the design contest, so i'll be sure to share our work (me and Mikko) to everyone!
Awesome video bud!
I saw the axys that did not end up being lit together, is there anyway you could give us the 3D files
I have a whole Polaris all tore apart already if you want it. I wanted to make something fun out of it, watched your kits/parts but never devoted anymore time. I also have a whole still working Yamaha. In years past I have wrote Traxxas and others to make a snowmobile, so been paying attention to your videos for years.
I do remember seeing your previous messages! it's nice of you to stick around, it's very appreciated!
Thanks for the offer, but i already have too many. You could list it for sale, i'm sure someone would be very happy to be getting that!
@@Pascal_Robert--Rc_Creations well you were talking about scavenging one of your complete ones. You can have this one. It would be good to see it go to good use. Pease make a Axys Pro and ill be a buyer when you offer a compete kit, even if its a SkiDoo. I have a long rc history.
All I want to know is if I'll be able to own one in my lifetime😭
Same
Same
I am only 11 but my grandma and grandpa got me the Yamaha viper RC sled that is in this video
@@mikeberneking6211 I've had one of the toy vipers before and the rmk, I'm talking about owning one of his sleds that he makes
@@mikeberneking6211 I know me too there awesome
Pascal thanks for everything! Ive been into all RC since '78, except these. I just bought my first one a Polaris Pro R 800 dead mint no radio. Can you please suggest upgrades like motor, pinions, esc, parts?
I suggest you have a look at the rush to rmk serie. It will give you a few ideas on what to do!
For motors and esc, any system brushless 1/10 works well, but i like castle creations stuff. I also like the hobbywing g3 v10 motor 10.5t. Super light and plenty of power
@@Pascal_Robert--Rc_Creations Thanks for the super fast response and help Pascal. I get it my Polaris today! How can a noob tell the difference between the older, better Ski-doo and newer ski-doo? I have a feeling Ill want one of those soon.
I had the nitro version snowmobile I put a OS max 21 on it it was just a pain and dident float like I thought it would. The track is not aggressive enough. I put stainless steel homemade scoops kinda helped but the sparks are really cool
Looks good bro
Cant wait the arctic cat working and hopefully you sell few models to hope to get a chance to get one that be sickk
I would like to see a full conversion of the Yamaha since this is the only one i can get my hands on
The kit is very simple to install on that platform. Pictures and the rmk building serie is all you need!
I need help I have a old ski doo bombardier one and I can’t figure out how to swap it
Is there a link where I could purchase a rev like yours ?
Where can you buy these snowmobiles and where did you buy all the parts,( if you want to sell one of your RC sleds let me know) BTW love the videos 👍👍👍👍👍👍👍👍
@@mikaelaakervik6794 ok 👌
How many hours did it take to make the Schottky snowmobile? It looks very nice!
It took a couple month of planning. The assembly of all the parts probably took 40 hours or so.
That is a lot of time!😮 Great work!
Are you still selling the conversation kits for the viper on your website? I just found these the other day and I am highly interested in upgrading it into something that's fun! Even the file would work if that's still available.
Yes! Both are still offered still!
I just got a 3d printer. Where can I find your stl files
Pascal roberts shop right now hes closed for holidays
i have the 2 bigger ones by new bright the red and yellow that i have done the conversion to hobby grade components and i also have 2 of the smaller ones that u show at 14:20 but i have one red thats still stock and working and one yellow one thats for parts as its skis are broken
What is the best rc snowmobile I can buy off of Amazon
man i want on of those rc snowmobile
Whats ur plans with them zx chassis? Ik how to biuld them pretty good. Would u consider selling?
I'd like a conversation kit for that viper
Will you build a Polaris axys chassis sled
love it!!!
How much would you sell one of a custom made by me of a 2003 rev 440 chassis? I do not have a price range just whatever it would cost to get a fully working one built by you. They are sweet looking and would love to ad this to my sled collection stuff in my garage.
Where can you buy a desently fast one
Where do you buy them?
You should try an axys again
Where can I find one of these I can't find em anywhere!
if i can, where can i get the 3d printing files for the blue arctic cat?
your bench looks like my yard in Alaska piles of snowmachines lol
Can I get the g4 with the bigger battery
Where can i buy one😂
Where can I get one
Where can I buy a rc snowmobile
Where car you get these rc snowmobile
I’m thinking of buying the Yamaha kit and wondering how long it would take to ship. I am in red deer. Canada if you could answer thanks
Maybe 5-10 working days from the day of order... Usually
@@Pascal_Robert--Rc_Creations ok thanks
How much to get one??
May i buy one off of you for the Christmas holidays?
Im looking for one but i dont know what one to get i dont want one really cheap but not too expensive
I have a few 3d printers. Do you sell the stl files to start a conversion or do you sell the parts?
Which files are you talking about?
How much would you want for it
Do you have to make these?
Where do you sell the files for the rmk?
What do these remote control snowmobiles sell for please comment back thank you very much
Only the art attack is selling as we speak. Have a look on their site!
@@Pascal_Robert--Rc_Creations I would you like to know what they sell for can you tell me that
@@martinneps9387 i dont know, they sell them.. have a look on their site
@@Pascal_Robert--Rc_Creations What you do just a 3-D printing of the front
How much to buy one
you should do a rider for the sleds. they look bit wierd without rider
Problem is they raise the center of gravity alot and then it's always on its side since it doesnt shift its weight like a real rider. Any kind of speed turn is impossible with the stock rider on top.
How can I get one I’ll buy
can you do boondocker 850
J'ai le body de fait a date du ALPHA et toi tu as le chassis haha on en as un complet a deux!
J'ai bien hâte de voir ce que tu va sortir!
\( ﾟヮﾟ)/
Would you consider selling one of your G4 builds?
I will sell more, just not at the moment. I'm waiting for early snow testing
I would like to by one of your rc ski doos! Would you sell any one of them?
You are missing the Polaris fusion 900 RC snowmobile. I think it’s the only other one you are missing
You are correct, i forgot about that one.
@@Pascal_Robert--Rc_Creations And the Polaris XC Edge one they sold for a little while. They had a red and a blue one I believe
no wonder i cant find any online, hes got 'em all lol
Can you try to hydroplane one please
Ive done it before! Its on youtube!
Do you think at 8:02 you could sell me that vehicleb
That could be something i do🤔
Send me a message directly on the website, let's have a talk!
I want the rmk back
Comment tu a faiiiiitt haha😅 le ski-doo 800 je le cherche partout sur internet et je n’en est jamais trouvé un😅 en fait j’en est trouver un neuf et juste avant que je l’achète il a été vendu😢 haha srx c’est vrm rendu cool tes projet continu demem c juste fous tout ce que tu fait😁
C'est a cause que le tien était si bon que j'ai voulu en trouver un autre! haha!
Pascal Robert - Rc Creations ouh 🥰😍
Men ! Il faut que tessaye de patanter une bras robotique sur le pont en arriere pour pouvoir contrôler une contre poid avec une télécommande a 6 canaux.. g une idee en tete sa serais tellement sick !!!!
Jai fais une video la dessus deja😄
When can a guy purchase one of your R/C POLARIS SNOWMOBILE
I dont sell rc polaris. Im not a company
can i buy
First love the videos
je ven acheter le kit ppour printer si tu aurait les info de chaque piece de surplus qui faut jachete je serait heureux
Matériel nécessaire pour compléter ce kit.
Modèle de base (jouet) de motoneige
Quincaillerie: une tige de 3 mm (allu ou laiton), une tige de 6 mm (30 mm de long)
Quatre ''colars'' 1/8
Un tas de vis (M2 & M3 ...) et rondelles
Deux roulements 6x13x5 et deux (12x18x4) (les unités sont en mm).
Un engrenage de 56 t et un pignon de 14 à 20 t de traxxas. (recherchez Traxxas # 3957)
Un peu de super colle
Un fil de calibre 16 (1,6 mm) (antirouille). Le fil a cloture fonctionne très bien.
Amortisseurs: deux amortisseurs de 60 à 78 mm à l'avant, un de 55 à 60 mm au milieu et un de 70 à 80 mm à l'arrière.
Une fine feuille d'acier ou d'aluminium pliée et coupée pour le tunnel. Dimensions dans la vidéo ... (Mon tunnel mesure environ 0,025 po d'épaisseur. Il pourrait être un peu plus épais en fait. En gros, vous pouvez le plier à la main, mais il n'est pas trop mou pour se plier tout seul.)
Electronique, j'ai dans ma motoneige un combo Brushless SCT de Castle creations, un servo de direction exi (engrenage métallique important) et un combo émetteur de spectre dx2e et récepteur. Tout cela couplé à un 3s 2200 mAh de Gens Ace.
@@Pascal_Robert--Rc_Creations merci enormement si jamais ta des kit de piece qui me faut je suis acheteur aussi xD
je prendrait 4 kit
tu es du saguenay ou qoi je regarde de video on dirait chicoutimi xD
@@Pascal_Robert--Rc_Creations combien pour 2 skidoo comme le bleu $$$$
Do you ride a real snow machine?
hey let me know if ur sell too i like too have some
Sell me the newbrights.... ik how to get em to work perfect
Super, pascal ses malade
show it and i want one so bad
Merry Christmas to you can I buy 2 for Christmas for 100$
Wanna sell a couple?
Nice work.👌 Here you have a swedish made rc snowmobil. Its a old retro model i think brp lynx rcskoter.se. I remember this rc sens i was small guy and now i thought about it when you make rc snowmobil.
Bring back the rank plz
Can you make me one
Bay A snowmobil plos
I will pay any amount of money for one
The collection will slim down in january, ill sell a bunch of sleds
@@Pascal_Robert--Rc_Creations if im in canada is it still possible for me to buy
Can I have 10 to get
make an arctic cat
tbvnk ses vrm malade
Make2003 pro x 700
Why do you not want to spread the love it's all copies of things that exist, if your proud of what you made then spread the love hoarding is pointless
Its not hoarding, i want to compare and then resell them after testing
i have a new bright mxz in excellent condition ill sell ya batteries missing
I’ll buy it
Where do you find it?