FOUR DOOR SUPRA FIRST TEST DRIVE!! (Sounds INSANE!)

Поділитися
Вставка
  • Опубліковано 3 січ 2025

КОМЕНТАРІ • 363

  • @maxbalke5583
    @maxbalke5583 2 роки тому +384

    Steve is definitely becoming a huge car guy, did you see that smile on his face when he got to rev the JZ and it made turbo noises? love to see it.

    • @ALONZ0502
      @ALONZ0502 2 роки тому +13

      It was the best part of the video he was even wondering why he couldn't hear the turbo

    • @BlancoRamirez
      @BlancoRamirez 2 роки тому +26

      And the way he asked Jimmy if it would be ok for him to rev it high

    • @malachibates3251
      @malachibates3251 2 роки тому +11

      I was just about to comment the same thing. I love seeing him slowly progress into a car guy. Can’t wait for a full build for steve

    • @jconn1984
      @jconn1984 2 роки тому +7

      @@BlancoRamirez literally most respectful that he asked. Even after seeing others do it..... that's a good friend!

    • @Antisocialwrx
      @Antisocialwrx 2 роки тому +2

      I smiled when I saw his smile

  • @Adam.dnb13
    @Adam.dnb13 2 роки тому +28

    Big shout out to Steve for having respect and asking before he revved it hard ! Need more Steve personalities in this world. Banger video as always Jim.

  • @DanglyDongly
    @DanglyDongly 2 роки тому +113

    Stevie you are the man. Seeing you build the knowledge is awesome. Jimmy keep teaching this man some things. He's such a great motivator!

  • @mickylejordansewlall6352
    @mickylejordansewlall6352 2 роки тому +49

    I feel like Steve gonna be a big car guy soon I can't wait to see what they have coming for him 👀

  • @jordank7685
    @jordank7685 2 роки тому +28

    TOM'S racing also has a bunch of bracing for the jzx100s that'll really help stiffen up the chassis. It is a really big chassis and it'll want to flex like crazy when driving aggressively

    • @jordank7685
      @jordank7685 2 роки тому +6

      Most definitely want to look into their trunk/boot brace and maybe a rear strut bar as well.

  • @johngoepel5263
    @johngoepel5263 2 роки тому +72

    Can you use heat to mould the overflow tank to curve around the intake? I'd hit it with a heat gun and apply pressure to it to give you more of a gap.
    Shout out to Patricia Oakes!

    • @JimmyOakes
      @JimmyOakes  2 роки тому +35

      ill definitely try that out!

    • @shannacollins4741
      @shannacollins4741 2 роки тому

      @@JimmyOakes Hey Jimmy how much faster is the new VVT motor in the yellow S15 than the regular SR20DET? JW

    • @ricefarmer1point6
      @ricefarmer1point6 2 роки тому +1

      Made the comment and then read through and seen you were already on the same page

    • @datdom34
      @datdom34 2 роки тому

      Epic thinking mate!!!

  • @theycallmedeano
    @theycallmedeano 2 роки тому +96

    Watch out for the intake vibration making a hole in the rez

  • @jaykane7721
    @jaykane7721 2 роки тому +22

    I love watching Stevie learn so much.
    Jimmy has some of the most fun/informative videos of all!

  • @seanthrane1040
    @seanthrane1040 2 роки тому +3

    steve is so considerate gotta love homies like that

  • @tristanmeadows
    @tristanmeadows 2 роки тому +1

    The red actually hits, black/red/silver. Sometimes things just work :D

  • @TasteLikeSilver
    @TasteLikeSilver 2 роки тому +1

    Shop videos are my favorite

  • @robertdeklerk4308
    @robertdeklerk4308 2 роки тому +1

    most humble channel on youtube!!! keep it up O fam!

  • @AG-tv6sh
    @AG-tv6sh 2 роки тому +34

    Honestly I’m excited for Steve to learn manual he’s gonna have so much fun even in a slow car, Steve needs a Honda the inner car guy is emerging and I can see it ahah

    • @AG-tv6sh
      @AG-tv6sh 2 роки тому +1

      Stockish/NA Honda

    • @conner768
      @conner768 2 роки тому +4

      he was driving djs kei van pretty good in one of the more recent vids on djs channel

    • @AG-tv6sh
      @AG-tv6sh 2 роки тому

      @@conner768 ahh good shit!

  • @hendersonwilliamk
    @hendersonwilliamk 2 роки тому +30

    You could fill the reservoir with water use a heat gun and mold it the shape you want.

    • @badgermetal
      @badgermetal 2 роки тому +3

      Do that with the whole radiator still in place then push it into the intake when its hot.

  • @Fk8_Theory
    @Fk8_Theory 2 роки тому +12

    Watching Steve slowly become a car guy right before our eyes. I think im gunna cry

  • @HeNdRiCkSoN9593
    @HeNdRiCkSoN9593 2 роки тому

    Jimmy, my office is literally at the entrance for your shop....seeing these videos then just looking outside and seeing it - makes my day, keep it up!

  • @clarenceperkins3115
    @clarenceperkins3115 2 роки тому +3

    Big Steve isn't looking so big anymore! Freaking love that guy, he is such a massive part of the channel and throws out all of the support!

  • @veeseemhii
    @veeseemhii 2 роки тому +1

    Always love to seeing jimmy working on Chaser. Teaching explaining everything. Love it. Send love Jimmy O

  • @d4vincii_projects70
    @d4vincii_projects70 2 роки тому

    I’m someone who tends to DO instead of WATCH and I’ve never been a loyal subscriber until you jimmy SO 💯 to you man I’m here for the long run

  • @PaceWorks
    @PaceWorks 2 роки тому

    I like the small red touches makes the engine bay less boring 🤙💯 any colour goes with silver 👌🤙💯

  • @snakezulu7
    @snakezulu7 2 роки тому +3

    Idea! Pull the bottle off, hit it with a heat gun where the pipe runs for a little bit (just looking to soften the plastic), stretch the plastic into the bottle to your needs, and then immediately throw it in the freezer for 20 minutes. It SHOULD fit better.

  • @Th3Gr3mlinz
    @Th3Gr3mlinz 2 роки тому +2

    Made me legit happy to see Steve wanna rev it and hear that turbo ❤️

  • @qtjakob9206
    @qtjakob9206 2 роки тому

    been watching for a long time now, and just wanna say god i love steve, he is always so interested and invested. throwin some steve luv

  • @lpdriftn
    @lpdriftn 2 роки тому

    There is just something so good about the sound a 1jz makes

  • @blakeknight9002
    @blakeknight9002 2 роки тому

    Glad to see this car coming together!

  • @travisjackson4837
    @travisjackson4837 2 роки тому +2

    Jimmy you gotta start dipping your toes in fab work! Because with your attention to detail I know you’d kill these fab projects .

  • @orionhoward9673
    @orionhoward9673 2 роки тому

    Jimmy like 4 years ago you told Tommy that you always lower it and put wheels on it first. So it looks good then you work on the engine bay, now you say bay first lol you’ve matured!

  • @heyitsbryce
    @heyitsbryce 2 роки тому

    I get a tourer v chaser in a couple months and I’m so stoked! Going to be my first import

  • @jhager214
    @jhager214 2 роки тому

    Excellent episode. Love the details.

  • @mastercricket7626
    @mastercricket7626 2 роки тому +1

    dudes that is soooo f'in rad and man i can not weight for steve to get rippin the manuals and start rippin with the boys more ... hellllz yeaaaahhhhhh .... peace n love all keep it rad stay safe and build on my brethren .... l8z

  • @DragonHeartDaily
    @DragonHeartDaily 2 роки тому

    Coilover, wheels, body kit. Can't wait 🤙

  • @jaydenvohnoutka9631
    @jaydenvohnoutka9631 2 роки тому +1

    Steve adds so much more character and good vibes to the channel

  • @adammurphy5496
    @adammurphy5496 2 роки тому

    Heat the coolant reservoir and push in the plastic for more clearance for intake pipe

  • @emersonviana6539
    @emersonviana6539 2 роки тому

    the red is a vibe in the Chaser!

  • @Roostermclintock
    @Roostermclintock 2 роки тому +1

    Jimmy 100% bought LZ yellow FD!

  • @jdmnic1
    @jdmnic1 2 роки тому

    Bro that interior is fresh!!!! 👍🏻

  • @lancelaprarie6128
    @lancelaprarie6128 2 роки тому

    Awesome. Jzx are like TE’s. Always a good choice.

  • @alexismichaela7110
    @alexismichaela7110 2 роки тому +1

    Mad respect to Steve for asking if it's ok to rev it high instead of just assuming.

  • @artemgubenya244
    @artemgubenya244 2 роки тому +1

    Bouta eat and jimmy posted, pretty good start to a Saturday

  • @gerardstefanelli1618
    @gerardstefanelli1618 2 роки тому

    Love it. Keep it up. Can’t wait to see it sitting pretty.

  • @HazePappa
    @HazePappa 2 роки тому +1

    It is a perfect sleeper, stock looking but it got a engine that puts the power down

  • @ivypirika8365
    @ivypirika8365 2 роки тому

    It’s currently 4.44am on the 17th of July in New Zealand 🇳🇿. Waddddup from New Zealand

  • @redgst97
    @redgst97 2 роки тому

    Use a heat gun to warm up the resivior plastic a bit, and clearance it for the IC piping

  • @jonodragicevich1286
    @jonodragicevich1286 2 роки тому +9

    Hey Jimmy! Love your stuff! Keep it up man, you're killing it

  • @kornkultrc
    @kornkultrc 2 роки тому

    Silver and red is a killer choice. 🤟🤟

  • @Axial32
    @Axial32 2 роки тому

    These JDM cars everywhere is awesome. Had a 91 Soarer with a turbo 1JZ at our shop for alignment. So weird driving a RHD manual transmission.

  • @BenjySparky
    @BenjySparky 2 роки тому

    Jimmy and gang y'all rock! Love the channel and content! I'm here for the algorithm! Peace

  • @kaoticef
    @kaoticef 2 роки тому +1

    Love starting my mornings with fresh Jimmy content

  • @DrM03N3R
    @DrM03N3R 2 роки тому

    Damn that things coming out clean! It’s cool to see Steve learning more and more too, what a legend

  • @aarondale1494
    @aarondale1494 2 роки тому

    This cars turned out awesome!

  • @tonyaduashvili9511
    @tonyaduashvili9511 2 роки тому

    you can worm up the reservoir with a heat gun and push in that spot where its touching to get clearance

  • @joshuadathsbc5765
    @joshuadathsbc5765 2 роки тому

    I love this car, excited to see the finished version

  • @nikefan522
    @nikefan522 2 роки тому

    Hondas do that too with the grommet for the clutch pedal spot

  • @Codeinelepew
    @Codeinelepew 2 роки тому

    The red hits 🔥! Jimmy keep it up mane !

  • @kzarnold3678
    @kzarnold3678 2 роки тому

    Nicely done

  • @dvmfabworks7116
    @dvmfabworks7116 2 роки тому

    Looks pretty good with the red! + on the intake from the supra!

  • @NARFALICIOUS
    @NARFALICIOUS 2 роки тому

    The mk3 supra clutch bolt pattern also works on the JZX Water Pump

  • @tomjasinski5334
    @tomjasinski5334 2 роки тому

    OEM+ baby!! Looks sick

  • @cait.fg2
    @cait.fg2 2 роки тому +7

    It's always a good day when Jimmy uploads! 🤙

  • @evanpelkey7864
    @evanpelkey7864 2 роки тому

    This is already so good, can’t wait til it’s totally finished

  • @projectjwoo
    @projectjwoo 2 роки тому

    Swap is super clean good work

  • @zakswindle
    @zakswindle 2 роки тому

    Eating wings with the boys working on my s13 watching on my tv in the shop. Supper hyped seeing jimmy uploaded.

  • @davidguerra8635
    @davidguerra8635 2 роки тому

    We love Jimmy ❣️

  • @ericday980
    @ericday980 2 роки тому

    Every video Steve gets biiiig car guy XP. Love to see it.

  • @BaselAbdou
    @BaselAbdou 2 роки тому

    any content that jimmy do is fun to watch ....best of the best from egypt cairo ....

  • @moosarahim9449
    @moosarahim9449 2 роки тому

    you gotta do it..feels good everytime☝☝☝

  • @bennett2781
    @bennett2781 2 роки тому

    I feel your pain on the Supra deal! But I'm glad you ended up with the three dope s15s! Happy early birthday excited to see the gift you hinted about!

  • @rikrocket4618
    @rikrocket4618 2 роки тому

    Respect to you and the gang Jimmy smashing the content

  • @clintonvanrijsbergen5017
    @clintonvanrijsbergen5017 2 роки тому

    If u install four small elec fans the work way more efficient and they quiet and have a switch

  • @robertobottonmineiro3670
    @robertobottonmineiro3670 2 роки тому

    Wow, the OEM clutch Fan of my tourer V x100 always scared me of one day „leaving the chat“, because is hard to source…Now I know some magic ✨✨✨. Thanksss for sharing❤️

  • @nicholasludlam9685
    @nicholasludlam9685 2 роки тому

    rock auto are bad ass , im in the uk and they save my ass on mazda part , i love rock auto

  • @paullongsden9413
    @paullongsden9413 2 роки тому

    Looking awesome

  • @nathanhill6607
    @nathanhill6607 2 роки тому

    I just finished manual swapping my old volvo 740 and u right the feeling having it all together finally with the manual stick and pedals etc is sickkk
    Not quite as cool as a chaser but still 😂

  • @TheBuildRoom
    @TheBuildRoom 2 роки тому

    Can you cut 10mm off that coupler and push that cooler pipe back a bit to get some clearance? Engine movement is probably going to be hard on that bottle. Either that or get a heat gun and yeah to up the resi, then you can probably just push a whoopsie into it and get it that way.

  • @christopherorantes2561
    @christopherorantes2561 2 роки тому +16

    Hey jimmy quick question some people get a whole new drive shaft for this swap. What drive shaft did you use ?

    • @ProfessorDickweedMD
      @ProfessorDickweedMD 2 роки тому +6

      Man you know all youtubers have a driveshaft specialty shop like 2 blocks away

    • @rowaldwousie5289
      @rowaldwousie5289 2 роки тому

      I think they said it a couple videos ago

  • @ddiemundz
    @ddiemundz 2 роки тому

    those gold blitz you got for the coupe would look fire on the jzx

  • @jeremymcjennett4744
    @jeremymcjennett4744 2 роки тому

    So sick congrats man

  • @andyamezcua7976
    @andyamezcua7976 2 роки тому

    11:35 the WRX wagons are also pull type

  • @rossgebert-goldsmith183
    @rossgebert-goldsmith183 2 роки тому

    Looks good ☺️

  • @SMOKINMEATZ
    @SMOKINMEATZ 2 роки тому

    MX83 7M clutch and fan worked for me

  • @ricefarmer1point6
    @ricefarmer1point6 2 роки тому

    Heat the reservoir and mold the curve with another piece of ic piping

  • @jordanbuchanan9749
    @jordanbuchanan9749 2 роки тому

    Finally something to watch thank you for curing my boredom lol

  • @shaunkearns2169
    @shaunkearns2169 2 роки тому

    So good big hi from Australia 🦘🐨🍻👍🐨 love your work and bless you and your family and friends 🤣

  • @trentaucion882
    @trentaucion882 2 роки тому

    Dude I haven’t missed a video since Nissanda. I remember watching Dj struggle to edit his first video. Been around since you lined out that car for hoonigan

  • @ughitskevin8537
    @ughitskevin8537 2 роки тому

    Now you just need to pull out the oem carbon parts from the interior and give them a buff. It’ll look mint!

  • @AlexA-bx8jr
    @AlexA-bx8jr 2 роки тому

    looks so good!

  • @scotthainey8682
    @scotthainey8682 2 роки тому

    The blue s15 is sooo good 🤤

  • @jamesbadham3872
    @jamesbadham3872 2 роки тому

    That jz is definitely down a cylinder Jim, she sounds like a 20v fiat or Volvo 5pot engine lol looks sick tho, the red intake kinda works too

  • @stevennewellproductions
    @stevennewellproductions 2 роки тому

    Clean swap Jimmy!

  • @cylturbskie
    @cylturbskie 2 роки тому +1

    Mate. Keep the red inlet pipe. For not even trying to do that specific colour scheme and just picking a random spare pipe up that was gathering dust that works out pretty damn tastefull.

  • @adammurphy5496
    @adammurphy5496 2 роки тому

    U should have something 3d printed to go in place of the front plate on the chaser and sell it on ur site if Toyota doesn't already sell it

  • @jordank7685
    @jordank7685 2 роки тому +1

    It needs the TOM'S tourerV grille and it'd be lit 🔥

  • @CTheOlbeast
    @CTheOlbeast 2 роки тому

    Hey Jimmy, you may want to heat the tank to shape. Juste to make sure nothing breaks. You know things move and push around. Just saying! Keep on moding brother! 👍

  • @tactix101
    @tactix101 2 роки тому

    had to drill the firewall on the glanza v
    also i kept the big brake pedal cuz i couldnt be arsed cutting it and it fucks with ppl who try and drive my car

  • @pristineautoclean
    @pristineautoclean 2 роки тому

    Sounds like a big turbo 24v vr6 ❤️❤️❤️

  • @TheRealMrRoyal
    @TheRealMrRoyal 2 роки тому

    Patreon gang!! Excited for this. Learning alot hope to get my n/a auto chaser soon!!

  • @Sauerbrew777
    @Sauerbrew777 2 роки тому +1

    Looking good! When are you guys going to turbo Steve's GS300?? I think it would be highly entertaining to see Steve's reaction!

    • @shona5512
      @shona5512 2 роки тому +1

      They probably don't want to mess with Stevie's daily. They've got a car coming from Japan for Stevie

  • @kornkultrc
    @kornkultrc 2 роки тому

    Hopefully I’m putting my 2jz into the project next year, I’m definitely going clutch fan after this video.

  • @darrenhattingh7334
    @darrenhattingh7334 2 роки тому

    Heat res up slightly and push it slightly

  • @clnfreakone8486
    @clnfreakone8486 2 роки тому

    Can you take a heat gun to the overflow and push a piece of pipe into it and clearance it more 🤷‍♂️