Great project. But i have a question if i want to make this kind of project permanent can i programm an EEPROM ship with arduino and send the code to it and use the ship instead of the arduino?
Hey I’ve printed out all parts and I have all electronics but I’m stuck trying to code. I’m trying to set the time using the ds3231 library and code but keep getting error saying “no matching function for call to ds3231 etc.. and it’s highlights “ the part under void setup..Ds3231 rtc (SDA,SCL);. Searched the forum and it says the code isn’t the right one for the library
I love this project and I am going to use it to make an electromagnetic door lock for my treehouse. I am confused because when is am trying to upload the example code I get the following error " Adafruit_Fingerprint.h: No such file or directory ". I have the fingerprint library downloaded and I am on Windows 7. Please help me, THANKS!
What if I burn all my fingers in a soldering accident or chop them all off while stripping wires? ;) But it's great to see tech like this accessible to the common people.
Isn’t that just an optical reader with built in micro? I’m pretty sure u can trick those ones with a picture. U should have used a capacitive reader like an fpc1020
You can't be 200 % confident. I think it's a value from 0-255 or 0-200. So you'd have to map that to 0-100 if you want to display confidence as a percentage.
Dear sir, I am trying to used solenoid door lock replace the servo motor, please tell me what is the change in this code for solenoid door lock, and i also remove the close push batton door is automatic lock after 1 minutes, what can i do please help me sir.....
Isn't it possible to simply unscrew your case and manually tell the servo to move. You should create a setup with all the electronics inside the house so it won't be possible to take apart from the outside
Still safer just to leave the arduino behind the door. Ripping off the metal case from the wall or door would leave the servo wires exposed and the system wouldn't be so secure.
Electronoobs And you could put anti-tamper measures. For example, activating an alarm if unscrewed. Also, putting a microcontroller on the inside that checks for a specific key sent by the one on the outside would massively improve security.
what is the right library for LiquidCrystal_I2C? i downloaded a lot off library then try 1 by one but the lcd steal no display? but in other project code the lcd is working ok. can you share your LiquidCrystal_I2C library?
I am working on same project however, I want to connect the database to server so that I can enclose the entire project in a box and access arduino remotely for any changes in database.
SIR the code that i download, the one in your link in not working the problem is "exit status 1 no matching function for call to 'DS3231::DS3231(const uint8_t&, const uint8_t&)'" that the problem can u help me that problem is near the library the "DS3231 rtc (SDA, SCl)
There is a serial UART that is used for uC programming, serial monitor and so on and that is for tx0 and rx0. The other serial in the code is defined as a software serial where you define the pins and those will create interrupts for rx and TX pins from the fingerprint sensor.
Amazing project and amazing video thank you 🙏🏻 I tried to do it and it’s work fine but when I changed the LCD print quotes the project is not working as before the lcd stop displaying and the module is not scanning it’s a weird problem does anyone have the same problem here or have any idea why is this happening and how to solve it ??
Want to help my workshop: www.patreon.com/ELECTRONOOBS
Thank you so much!
Superb project,
Do one more project-attendance system using finger print
Great project. But i have a question if i want to make this kind of project permanent can i programm an EEPROM ship with arduino and send the code to it and use the ship instead of the arduino?
if i donate some money to your patron will u help me with my problem???
@@bechir.jaballah this guy doesnt reply back to no one i c
How to change admin Incase the admin is not available or dead.
Well done. I need something l7ke this on my shop door.
For more security would need a metal door. Perfect project for your plasma cnc :)
Excelente amigo!!! Suscrito a este canal y al +Electronoobs España!!
can you please make a video with capacitive finger print sensor.
Great project, dude! Really well done! 😃
Nice Video. I've ordered the components to build it! I will use it for my garden shell
👍👍👍Useful video. Excellent 👍👍👍
The "poor man's" lenel system. Love it
Can you make one using all of the locking method. Please
VERY INTERSTING PROJECT "I LIKE IT"
Excellent video ! I need this for my workshop ! Thnxs for sharing.
Another inventive and clever video!
You have to add auto off display when do nothing with lock and wake up instantly when touching scanner or something.
how maximum users can I add in this project, and how I maintain it in code pls??
Cool project!
Can I use startek FM220 fingerprint sensor
Hey I’ve printed out all parts and I have all electronics but I’m stuck trying to code. I’m trying to set the time using the ds3231 library and code but keep getting error saying “no matching function for call to ds3231 etc.. and it’s highlights “ the part under void setup..Ds3231 rtc (SDA,SCL);. Searched the forum and it says the code isn’t the right one for the library
U r brilliant sir
I love this project and I am going to use it to make an electromagnetic door lock for my treehouse. I am confused because when is am trying to upload the example code I get the following error "
Adafruit_Fingerprint.h: No such file or directory
". I have the fingerprint library downloaded and I am on Windows 7. Please help me, THANKS!
Just amazing!!!
Good job
Can u add buzzer for those who attempt scanning their finger that are not registered
comments on this video funny 🤣🤣🤣😂
Woow!! That was intense bro, good work, thanks for sharing.
I'll order the parts, hopes you will be near to help
What if I burn all my fingers in a soldering accident or chop them all off while stripping wires? ;)
But it's great to see tech like this accessible to the common people.
How could I mix the two codes? The Fingerprint + numpad in one project.
Isn’t that just an optical reader with built in micro? I’m pretty sure u can trick those ones with a picture. U should have used a capacitive reader like an fpc1020
You can't be 200 % confident. I think it's a value from 0-255 or 0-200. So you'd have to map that to 0-100 if you want to display confidence as a percentage.
Lol
Lol! That's true!
How can be open from inside. please reply I will be highly obliged.
please makes an arduino multiple door lock access, using fingerprint and rfid
and how we wanna delete fingerprint id for change new one? can you help to add the coding too
i love it 😍
tried finding those buttons but the link doesn't work anymore
Dear sir, I am trying to used solenoid door lock replace the servo motor, please tell me what is the change in this code for solenoid door lock, and i also remove the close push batton door is automatic lock after 1 minutes, what can i do please help me sir.....
why you use 2K resistor in push button ?
can I change the servo motor to solenoid lock?
Can u please tell me the version of IDE u used in this video will be a great help i m having a few problems i think its because of the version
I'll make a Bluetooth one with HC 05 ;)
Where can I see the code?
Isn't it possible to simply unscrew your case and manually tell the servo to move. You should create a setup with all the electronics inside the house so it won't be possible to take apart from the outside
Jo Hinder you could (and should) just simply put the servo and all the electronics except the servo behind the door, so it can't be tampered with.
The idea is that the servo would be on the inside of the door and the electronics inside the case. Metal case even better...
Still safer just to leave the arduino behind the door. Ripping off the metal case from the wall or door would leave the servo wires exposed and the system wouldn't be so secure.
By the way, i really appreciate you making these videos and even taking time to anwser questions :)
Keep up the good work!
Electronoobs And you could put anti-tamper measures. For example, activating an alarm if unscrewed. Also, putting a microcontroller on the inside that checks for a specific key sent by the one on the outside would massively improve security.
Sir why the fingerprint led is still on but cant scan but when i press scan it scan what is the problem sir so the led of fingerprint off
Hola Dr. excelente proyecto, porfa pasame el link en español para entederlo al 100%. Mil Gracias.
Hello sir i will apreciate if u make a tutorial on battery charger arduino based especially lead acid batrery plzzzs
where is the power source?
Sir your project has been better. I would like to make this project. But what will be the use of the FPM10A Optical Fingerprint Reader Sensor Modules
nice video
how many user we are add in this sensor pls reply
121 fingerprints
can i use usb fingarprint sensor >>>????
what is the right library for LiquidCrystal_I2C? i downloaded a lot off library then try 1 by one but the lcd steal no display? but in other project code the lcd is working ok. can you share your LiquidCrystal_I2C library?
Please make video on how to make Tesla coil
I am working on same project however, I want to connect the database to server so that I can enclose the entire project in a box and access arduino remotely for any changes in database.
Your project is cool and we use arduino uno in this project its possible or not
No. You need more memory than the UNO has. You need a Mega
Did the voice just change?
Pls make some video on GUI of Arduino Uno Because your Video is always awesome
Just a tip: uart is pronounced "you art" and not "wart"
Nice Bro
Can i use r307 finger sensor for this project
Reply fast as early as possible
How we add esp8266 to it?
Can I replace Arduino mega with Arduino nano sir
SIR the code that i download, the one in your link in not working the problem is "exit status 1
no matching function for call to 'DS3231::DS3231(const uint8_t&, const uint8_t&)'"
that the problem can u help me
that problem is near the library the "DS3231 rtc (SDA, SCl)
what if the system restarts ?what happens to the data ?
DS3231 library doesn't contains library files unable to install it in arduino ide
emmm, why are there softwareserial in the code? i mean ATMEGA256 have literally 4 pairs of hardware UART
There is a serial UART that is used for uC programming, serial monitor and so on and that is for tx0 and rx0. The other serial in the code is defined as a software serial where you define the pins and those will create interrupts for rx and TX pins from the fingerprint sensor.
But the point is that the mega has several other hardware uart pins which you could use
Nice video sir,I look forward to your nest video
Amazing project and amazing video thank you 🙏🏻
I tried to do it and it’s work fine but when I changed the LCD print quotes the project is not working as before the lcd stop displaying and the module is not scanning it’s a weird problem does anyone have the same problem here or have any idea why is this happening and how to solve it ??
can you send me the program pls
can we use Arduino UNO here in place of Arduino Mega....??
what happens if i lose my finger?
Does anyone have an estimate of cost of parts for this build? (Excluding 3D printed pieces)
excelente.. ahora mi auto encenderá con mi huella.. jeje
exit status 1
no matching function for call to 'DS3231::DS3231(const uint8_t&, const uint8_t&)'
dowload the next library , copy: Rinky Dink DS3231... Sorry, I'm mexican......
no entiendo a que se refiere con seguridad blackbox
Black box es una caja negra. Se guarda el historial de todo lo que pasó con la cerradura...
You were learn your lesson that from Collage, weren't you?
howtowrok for arduino uno
Oswame, full Kadak rahdha ghatala
0:48 now we know your fingerprint haha
Add it to a car to start it
fingerprints are easy to copy... see mythbusters
Even easier to cut them off, people get killed and cut in pieces for less.
First I'm