Thank you,,, plz bring some video about oiler work, and how to start main engine, hot synchronise generator, and daily consuming of fuel of main main engine and how to calculate it,, plz
Sir please note this ullage method s used to do measurement for tanks with fuel oil oly..... Pls list me out your queries so that i can try to clear your confusion...
@@marine-knowledge-basha i agree with u sir...but ullage means empty space...right sir?...so if we wanna cal ullage..then we should calcult empty spce only ...am just a enge cadet sir...so...i may be wrong sir,,,...i just wana clear my doubt sir..
@@amicheal1405 u r vry rt sir... U need to find the empty space... So the empty space finding will give you the value of the space with cargo(fuel) in the tank. This will give you the way to find the sounding...
@@amicheal1405 you are Always welcome sir.. Fl free to ask your doubts anytime... Requesting you to share our channel with ur friends and subscribe.. Thanks
Condition to take the sounding : * check for the ship trim while taking sounding. * weather condition should be calm. * There should not be any loading or discharging operation going on. * No pumping operation should be carried out from the tank which you taking sounding. Hope this information will clear your queries... Pls msg me of you still hv any queries
Sir, While taking sounding continuously their are lot of chance to damage the datum plate because of the metal bob attached to the end of steel tape, so how to fix it
That will happen cant help it..only way is u have to use the tape slow and to stop gauge before it reaches the bottom level and slowly lowers with reference to the total height.. it happens bcas of the bob hitting the plate at high speed...
Sir correct me if i wrong can't the ullage be calculated from the actual height of tank minus value of sounding we got ... Because it seems to be very confusing also and we have to repeat this process two times for ullage value .... Please correct me sir if i am wrong
Sir definitely there will be sounding for each tank... You will find the height of tank in sounding table. If you put more tape then you will get false reading.. Hope this reply will satisfy your query..
❤❤❤ thank you brather🎉
Thnx sir im from srilanka 🇱🇰 😊
Keep supporting
Yes, finally English. Thanks brother.
Welcum sir
Thanks for sharing ur knowledge 🫡… Very Clear explanation.
Glad it was helpful!
Thanks bro. From Myanmar(Burma)
Welcum bro.. Requesting you to share our channel with ur friends and subscribe
Very good bhai..keep it up. Anil from India.
Thanks for your compliment sir.. Requesting you to share our channel with ur friends and subscribe..
Good and clear explanation. Thanks you very much
Thanks a lot sir.. keep supporting..
Huge respect sir...
glad sir...
Thanks you, it really helped a lot ♥️
Gud to hear sir
Thanks sir very Informative video
Welcum
Nice explanation.. Try to do more.. Clear cut explanation hats of bhai
Thank u sir...keep supporting
Thank you,,, plz bring some video about oiler work, and how to start main engine, hot synchronise generator, and daily consuming of fuel of main main engine and how to calculate it,, plz
Very good video make more videos sir..
Thanks for your good compliment sir.... Requesting you to share our channel with ur friends and subscribe
@@marine-knowledge-basha ok sir..
Super sir very clear
Thank you sir... Requesting you to share our channel with ur friends and subscribe
Pls post any of ur marine related queries in comment box... Definitely vl reply u..
Why you drop exactly 20 m during taking ullage??Please response as soon as possible sir.
And i thought ullage is a method of calculating empty spaces only...but here sir you did fuel level by ullage method...im little bit confusing sir
Sir please note this ullage method s used to do measurement for tanks with fuel oil oly.....
Pls list me out your queries so that i can try to clear your confusion...
@@marine-knowledge-basha i agree with u sir...but ullage means empty space...right sir?...so if we wanna cal ullage..then we should calcult empty spce only ...am just a enge cadet sir...so...i may be wrong sir,,,...i just wana clear my doubt sir..
@@amicheal1405 u r vry rt sir... U need to find the empty space... So the empty space finding will give you the value of the space with cargo(fuel) in the tank. This will give you the way to find the sounding...
@@marine-knowledge-basha okay thankq so much...i hope your guidance will help me lot to my first voyage as t.m.e....thnkq so much sir
@@amicheal1405 you are Always welcome sir.. Fl free to ask your doubts anytime... Requesting you to share our channel with ur friends and subscribe.. Thanks
It really helpful
Thanks for your good compliment sir.. Keep supporting
Can you please make a video on how to calculate bunker quantity uding trim correction.
Sre sir wrkng on it... Pls giv sme time..
Clear knowledge
Thank you sir.. Keep supporting.. Share our channel with ur friends
Thank you so much SIR. Very informative 😃
Most welcome
Basha sir should we do ullage during bunkering commencing
Mostly we take v bunker in empty tanks.. So initially hv to take full and during bunker we take ullage..
Sir why did you take only 20meter for ullage
Sir in your video
9:05
ullage will be
2000-35= 1965cm
am i right?
pls reply
Yes... I think so but here its calculation gets wrongs...
2000 - 35 = 1965
1965 + 407 = 2372
Its very confusing... 🙄
sir...lemme chk and reply u
Sir,...when we will do sounding calculation?.. at what condition that calculation should b done
@UC0UlJrKMYIQ5q9ksCMcf4dA so every time when we take sounding..we should also do calcultion...am i correct sit
Condition to take the sounding :
* check for the ship trim while taking sounding.
* weather condition should be calm.
* There should not be any loading or discharging operation going on.
* No pumping operation should be carried out from the tank which you taking sounding.
Hope this information will clear your queries...
Pls msg me of you still hv any queries
@@marine-knowledge-basha ok thankyou so much sir
@@amicheal1405 s sir.. U hv to do calculation every time wen you take sounding
@@amicheal1405 welcome sir... Requesting you to share our channel with ur friends and subscribe to
How you take ulage 20m????
Thank you, sir.
You're welcome
Please how can I convert it to liter's
Sir, While taking sounding continuously their are lot of chance to damage the datum plate because of the metal bob attached to the end of steel tape, so how to fix it
That will happen cant help it..only way is u have to use the tape slow and to stop gauge before it reaches the bottom level and slowly lowers with reference to the total height..
it happens bcas of the bob hitting the plate at high speed...
Sir please guide me I'm recently start as motorman
Sure sir.. Vl do
How would you be able to tell if there if the oil was contaminated with water ?
u can find a lot of water coming while draining oil in settling tank...u can also even find it out in fuel oil analysis report..
Sir correct me if i wrong can't the ullage be calculated from the actual height of tank minus value of sounding we got ... Because it seems to be very confusing also and we have to repeat this process two times for ullage value .... Please correct me sir if i am wrong
Sir, ur way is also right...but it depends on individuals ..whichever they prefer its easy for them ...u can go ahead with that...
If we don't know the tank high, can we find the high with sounding tape? And if we put the tape more than the tank high what will happen? Sir
Thanks for your good query.. Requesting you to share our channel with ur friends and subscribe..
For ullage if suppose tank length is 1500cm nd we drop upto 1200cm so ullage value is 300+whatever mark value on tape..is it right sir?
S sir ur vry crt....
@@marine-knowledge-basha
Thnk yu sir 👍
Total tank 24.07m
Sounding taken 4.42m
24.07-4.42
19.65m is ullage
Empty space of tank is 19.65m
I m ryt sir ?
@@sanjayshadow1790 I also calculated same
Sir. After taking sounding how to do calculation.
Thanx for your query sir... Vl post a vdo on this soon
,👍🏻👍🏻
Thanx boss
Sir you are taking only sounding not ullage. ullage is 2000 - 35 = 1965 is a ullage.
If we don't know the tank high, can we find the high with sounding tape? And if we put the tape more than the tank high what will happen? Sir
Sir definitely there will be sounding for each tank... You will find the height of tank in sounding table.
If you put more tape then you will get false reading..
Hope this reply will satisfy your query..