Ulanzi F22 Quick Release Plate (This is well built and works like it should) Jump in the Comments
Вставка
- Опубліковано 5 січ 2024
- Join the Community - www.thebetterbuyguy.com
Quick Release Mount - amzn.to/41VJeqB
Rode Wireless Pro Kit - amzn.to/41IgQbk
Wireless Go 2 Bundle - amzn.to/3RHSwl4
Dji Mic Kit - amzn.to/3tFGKzB
Rode Interview Handle - amzn.to/3GYpyZd
Recommended Interview Handle - amzn.to/3RYsnje
Rode smart Lav+ - amzn.to/3tojy9e
Rode lav Go - amzn.to/3RXOXIK
Rode lav 2 Premium - amzn.to/4aEqWh8
Rode Video mic NTG - amzn.to/41Gn1wl
Canon EOS R Camera- amzn.to/43GaSqA
Camera Gear
DJI Pocket 3 Creator Combo - amzn.to/3ThlnPD
Insta360 X3 - amzn.to/3Lk9NhR
Main Vlog Cam- GO 3 Action Kit: amzn.to/3OuYs0A
Main Tripod Switch pod- amzn.to/44IR5Z8
Portable Battery Pack: amzn.to/3q2rGKG
Canon Camera With lens- amzn.to/43GaSqA
Studio Camera - amzn.to/43W8MmR
Studio Mic - amzn.to/452h90L
Studio main lights - amzn.to/44D4iCL
Studio back lights - amzn.to/44Xf9aj
Light Stands - amzn.to/44D4lyr
Gorilla Pod- amzn.to/3Y7rjes
Manfrotto tripod- amzn.to/3Dsad1d
RunFree Open Ear Headphones - amzn.to/3TnUr0N
Clear Headphone - amzn.to/3Npx6rt
I actually thought of buying this system first when I ordered my Action 4. But, as the A4 does not have an easy 1/4" mounting possibility (even very few cages have these actually) I went to buy the new mounting system from PGY Tech instead (in particular the Neck Mount which is incredible and also the Selfie Stick with a ballhead, both easy to find).
Together with the Ulanzi Cage for the Action 4 this is the best POV / Selfie Stick combo I can imagine as it is so versatile.
However, Falcam / Ulanzi produce amazing products but some of them are too pricy in my opinion...
Love this comment. Going to look just to the set up you described. Thanks for taking the time to share it.
whats amazing about the neck mount is, that it also comes with a strap that basically transforms it to a chestie and can also be wrapped around different things just like with the monkey tail but not quite as strong (but you can always close it so it is arguably safer nevertheless) - cheers!@@thebetterbuy
I found sometimes you have to wiggle a little to make sure it’s locked, otherwise it tends to go over the locking point and fall out. This is probably due to the machining tolerances, you may not experience the same.
Thanks for the heads up. I’ll be looking for that.
@@thebetterbuyI just discovered mine is giving me micro judder with X3 when skiing😂 so bad that I have to ran the output footage through davinci or lumafusion to stabilize…
@@qin1992 woh that’s not good. Any idea where the gutter is coming from and if it can be tightened?
@@thebetterbuy Never mind, I found the issue is really the insta360 app, when deep tracking, there is a new option to lock the target to the center at lower right corner. Whenever that is turned on the footage becomes shaky and seems loosing frames🤔
@@qin1992 well that’s good to know. For both reasons. Thanks for sharing.
У меня уже куча таких. А ещё у них есть переходник с 22 на 38, как в моём последнем видео про GoPro. Но для корман 3 я купил у них не 22, а 38. Камера может стоять на нём даже без шатива
Thanks for the info. Love helpful comments like this.
One of the best videos I've seen regarding the f22. I was wondering about tolerance on it and if it would cause any shakiness, but it looks pretty tight. It looks like you have the standard f22 mount as opposed to the skinnier one they make for 360 cameras. Since the X3 is a bit wider than some other 360 cameras, is the mount entirely invisible?
Hey I just did a 5 mile run with my daughters and this was getting bounced and shaken around with curbs and it held strong and was not in the stitch line. I’m working on a video that includes this footage. It will be out in a couple weeks. Hope this info helps for now.
@@thebetterbuy it does indeed. I'm going to be mounting my X3 to some tractors that are a rough ride and wanted to make sure that the footage will be usable.
@@deflaytedwayz1 well my next vid should show some of that.
isn't the tripod attachment that camera has already a quick release plate?
So it sin to parts and the way the tripod connects to the quick connector is a 1/4 thread. So still spinning stuff :)