nice setup bro I suggest u get a hood scoop instead and eliminate those side intake tubes and get like a new set up for the intake so it will breath more cold air from top of the stock intake
gosh Im building one and you make what Im doing look pathetic man,,wow what a job and what parts,,heck im going with the 350 4 bolt main engine with doubke humo 300 hp heads and edlebrock quad in take with a big quad carb,,,gosh I am impressed with this build man,,what a job,,,Rick
Pretty much a warm air intake with all the heat stuck under that hood . Even my v6 headers crank alot of heat out which is why I have a 4in cowl hood .
I got a 95 s10 with a 383 stroker bore 40 with a 580 crank cam &1.6 roller rockers dual line 850 carb victor Jr intake turbo 400 tranny MSD ignition MSD distributor 882 heads aluminium valve covers guide plates screw in studs 10 gallon fuel cell and Mickey Thompson drag radials
Logan Mitchell , if your S-10 had a 4.3 V-6 it might have a 8.5 rear end in it already , here is how you can tell , where the axle tube comes out of the ring and pinion housing or pumpkin it will have a flare tapered tube, smaller 7.5 rear end has straight tubes coming out and all the way across from the housing to the brake hub , if your's has the flared tapered tube just get a limited slip or posi unit and add to it , this is the L35 option code from 1995 and newer S-10 two and four wheel drive truck's , this rear end is strong enough for the V-8 engine
I would love to do that to my ZR2 package 4 wheel drive truck. Do you think it could be done? Please comment back it. Let me know and I would still love to have my 4 wheel drive. Hope you Comment back and let me know thank you for this video that truck looks sexy
You should be proud....that's one beautiful machine.
Nice truck looks amazing
Wow very nice looks like it came that way!
nice setup bro I suggest u get a hood scoop instead and eliminate those side intake tubes and get like a new set up for the intake so it will breath more cold air from top of the stock intake
Clean ass truck really nice man for sure 💯
gosh Im building one and you make what Im doing look pathetic man,,wow what a job and what parts,,heck im going with the 350 4 bolt main engine with doubke humo 300 hp heads and edlebrock quad in take with a big quad carb,,,gosh I am impressed with this build man,,what a job,,,Rick
Pretty much a warm air intake with all the heat stuck under that hood . Even my v6 headers crank alot of heat out which is why I have a 4in cowl hood .
where did you get the carpet bedliner
Love the truck . One rec, back bumper needs to go.get that roll pan, replace lower bed panels for that smooth look into the roll pan ...
what exact rims are those ??
That's a beautiful truck well but together nice job
badass truck
Sounds awesome. Bad ass!
Is that a custom intake or bought?
I got a 95 s10 with a 383 stroker bore 40 with a 580 crank cam &1.6 roller rockers dual line 850 carb victor Jr intake turbo 400 tranny MSD ignition MSD distributor 882 heads aluminium valve covers guide plates screw in studs 10 gallon fuel cell and Mickey Thompson drag radials
Hey, where did you buy the front grill? love it
www.amazon.com/APS-1998-2004-Pickup-Blazer-S18-A31868C/dp/B0791SDW7L/ref=mp_s_a_1_1?ie=UTF8&qid=1532404280&sr=1-1&refinements=p_4%3AAPS&pi=AC_SX236_SY340_QL65&vehicle=1999-47-488------------1-0&dpPl=1&dpID=51EHgO5X8YL&ref=plSrch Gerson Goulart
did you cut firewall or anything?
I couldn't tell if it was a Gen 1 SBC, Vortec or LS motor. But very sweet S-10.
What transmission is in this beauty?
I have the same truck an want to do the same thing with a 383 any suggestion are you willing to talk
Where did you get the piece for the intake?
Where did you get your rear end from
I got a 2000 s10 xtreme I wanna v8 and need a very sturdy rear axle. What would you recommend for it?
Logan Mitchell , if your S-10 had a 4.3 V-6 it might have a 8.5 rear end in it already , here is how you can tell , where the axle tube comes out of the ring and pinion housing or pumpkin it will have a flare tapered tube, smaller 7.5 rear end has straight tubes coming out and all the way across from the housing to the brake hub , if your's has the flared tapered tube just get a limited slip or posi unit and add to it , this is the L35 option code from 1995 and newer S-10 two and four wheel drive truck's , this rear end is strong enough for the V-8 engine
AWESOME!!!!!
Que medida son los rines? y las llantas
Emmar Antonio Almaraz Benavides
Regularmente son 17 pero se mira siempre mejor los 18
What year is that engine?
Is it for sale
Is it possible to pass emissions with this
Depends where your from man, a lot of states don't even do inspections so at least for me, I can get away with almost anything with my s10
That sounds really really good !!!!!!!!!!!!!!!!!! 😁😁😁😁😁😁😁😁😁😁😁😁😁😁
Why are the ss emblems on
tightlaser because it is a street sport.
price pls
what size wheels?
que medida son las llantas?
I would love to do that to my ZR2 package 4 wheel drive truck. Do you think it could be done? Please comment back it. Let me know and I would still love to have my 4 wheel drive. Hope you Comment back and let me know thank you for this video that truck looks sexy
are u selling it
Javier Rojas He is (or was) look in the description
What motor gut
Kenneth Serrano , he said 383 /450hp
I would like to do that with a 4 wheel drive ZR2 pick up.I think it would be pretty nasty if you ask me
do a driving video :)
looks and sounds amazing but now its gonne be 1/4 the value if that in a decade or less
Sweet Jesus Everett
sweet
Chevy and ford really screwed up not offering a V8.
Looks mean 👌😊
SS Xtreme ? sure it isn't
Let's see just how fasr it is...
h