Very good guide. Feedback would be most people would appreciate a video on the programming of the Euro46 at a slower pace to enable a person to follow better, maybe a separate video just on the programming. otherwise excellent.
i really enjoy your videos as its given me the determination to install my own alarm system when i get a place of my own the bellbox you put up is that the backlit deltabell keep up these great videos
Great video. I've just moved into a property and have one of these alarm panels. Problem is I don't have the engineer code (nor does it use any of the defaults). From what I understand, I need to connect a couple of pins together on the PCB and start it up to factory reset it. Problem is though I can't see any of the NVM pins on the board at all to do this. Have you got any pointers on how to factory reset one of these boards? Thanks in advance.
Hi, thank you for visiting my channel. The euro-46 panel does not have a NVM pin. To rest default engineer and user code you need to call Pyronix tecnical help line: 0333 444 1280 terms and conditions applied.
Power make common pair one for zone 1 pair two I used different zone on 4 pair cable you can use 3 zone. In this video I show different techniques if see all video. Hope this is ok for you to understand thanks to watch my video.
Brilliant video. Good explanation. Could you do a video using this pyrotex euro 46 box but old type PIR sensors and shock sensors (6 wires), door contacts with 2 wires and old external sounder with 5 wires please
Hi there, thank you for your comment. I did this Just to show you can use the 2 zone on your keypad z1 & z2. z1 means zone 73 and z2 means zone 74. 8 zone you can use on the main panel and 2 zone you can use on the keypad which I explain within the video so in total you can use 10 zones. Hope this answers your question.
@@seiluk Thank you Shahzad for explaining so to use the 2 x zones from the keypad is programmed as input 73 & 74, there for leaving the 8 zones to be used in the main panel 👍
Excellent and very informative video! Thank you. Is it possible to connect a wired doorbell button to the system board of the Euro-46 and then use its internal speaker (17:54) as a chime/doorbell ?
Thanks to watch my video and support my channel. I never tried but I think could work. I need to check how many volts come when panel gives trigger for chime. + is common and - come from panel when trigger. If you put bell you need + and - voltage always there on door bell. I need to check then I let you know.
@@seiluk Thank you for your swift response! I already have a PoE SIP doorbell, but want to swap it for a HikVision DS-KIS605-P and was wondering if I could use the speaker that I already have for my Pyronix Euro46 and avoid adding a chime like the one shown in this video ua-cam.com/video/U7Cq-bXoqH4/v-deo.htmlsi=aCV_zyMobylZ_eBZ
This is a great video. I was a bit confused about how you did the loop for the internal sounder. Did you just cut the cables and then join them back up and only use two cables for the sounder? And assuming they go back to the panel under SPK and AUX+. Thanks
Hi, I like the way you show how to do the installation but I'm going to do the same Euro 46S and I haven't done it before but unfortunately I'm struggling with it, it has 2 door contactor and 4 sensors, by watching your videos it has clear for me but the 1st part of but I don't know how to do the 4 sensors and connections at the main box. Would you help me with it?
If you see on playlist all euro 46 videos then you understand how I connect and programmed all devices link below: ua-cam.com/play/PLhhdSobCeERGo6MlLZgaN7CEQt-qV9wH1.html
I have the same system, I am looking to remove some sensors temporarily for decorating, is there a way of putting the system into anti tamper? Deactivating the tamper settings until i have painted behind the sensors?
Hi leave system in engineering mode or user mode. If you don’t no engineer code then leave system in user mode. If you don’t know used this step: Press D then press your code ???? then leave this mode. Now you can open sensor cover. After finish put cover back and press no no no then press A. Hope this is okay for you thanks to used pyronix system.
For the motion sensors I want to wire two in Normally closed. The 12v+ and 0v should I connect it to the panel? And only one wire for alarm and 1 for tamper. Or two wires for tamper n alarm and still use the 12v and 0v
Yes 12v power for sensors from panel. 2 option if you used EOL connection as I show in this video then you used 4 wire 2 for power and 2 wire used for alarm and tamper. If you used alarm and tamper separate connection then used 6 wire connection. 2 wire for power 2 wire for alarm and 2 wire for tamper. Hope this Answer is ok for you.
@@neilj2327 I have some videos in playlist euro-46 should watch all videos I show everything below link: ua-cam.com/play/PLhhdSobCeERGo6MlLZgaN7CEQt-qV9wH1.html
Good day, I've managed to program most parts of the system. However in setting the alarm I'm getting unable to set 4 of the inputs. From 1 to 4 respectively, the motion sensors are working, the contacts connected to the zone expander are on input 9 and seems to be working. Please help urgently as this is my only set back in completing this alarm job. Will also need to figure out the siren to sound off when an alarm is detected
@@neilj2327 watch my this video I used sensor on expender below link: ua-cam.com/video/4bie0GYhUhg/v-deo.html About external bell when alarm trigger bell will make sound automatically
i make video on 2 door contact in series wiring use 3 x 2k2 resistor and apply same connection on pir hope this link make help thanks to support my channel. ua-cam.com/video/uHEXXjqHNQc/v-deo.html
Hi Shahzad I am having problem with home alarm, can’t set all set up A alarm. I can set up B alarm but when go upstairs front of upstair sensor alarm goes off. I think by mistaken I changed the setting. Is any chance can you please help me to setup. It’s Pyronix alarm
Hi this is installation video how install all parts and quick programming. See video in details please follow below link: ua-cam.com/play/PLhhdSobCeERGo6MlLZgaN7CEQt-qV9wH1.html&si=NKz9_dFBz5yBtcm5
Very good guide.
Feedback would be most people would appreciate a video on the programming of the Euro46 at a slower pace to enable a person to follow better, maybe a separate video just on the programming.
otherwise excellent.
i really enjoy your videos as its given me the determination to install my own alarm system when i get a place of my own the bellbox you put up is that the backlit deltabell keep up these great videos
Huge amount of hands on info in this video 👏🙏
Hi
Brilliant video when are you going to do more videos of burglar alarm installation videos ?
Thanks
More video coming Euro-75
Great video. I've just moved into a property and have one of these alarm panels. Problem is I don't have the engineer code (nor does it use any of the defaults).
From what I understand, I need to connect a couple of pins together on the PCB and start it up to factory reset it. Problem is though I can't see any of the NVM pins on the board at all to do this.
Have you got any pointers on how to factory reset one of these boards? Thanks in advance.
Hi, thank you for visiting my channel. The euro-46 panel does not have a NVM pin. To rest default engineer and user code you need to call Pyronix tecnical help line: 0333 444 1280 terms and conditions applied.
great vid, would you be able to tell me why you wired the 2 pirs differently (for the second you used different coloured cables to the first) ? thanks
Power make common pair one for zone 1 pair two I used different zone on 4 pair cable you can use 3 zone. In this video I show different techniques if see all video. Hope this is ok for you to understand thanks to watch my video.
Brilliant video. Good explanation.
Could you do a video using this pyrotex euro 46 box but old type PIR sensors and shock sensors (6 wires), door contacts with 2 wires and old external sounder with 5 wires please
Like your work & video's 😎 thank you for sharing 🙏 can I ask why you used the front door contact as input 73 & then the hall entry has input 1?
Hi there, thank you for your comment. I did this Just to show you can use the 2 zone on your keypad z1 & z2. z1 means zone 73 and z2 means zone 74. 8 zone you can use on the main panel and 2 zone you can use on the keypad which I explain within the video so in total you can use 10 zones. Hope this answers your question.
@@seiluk Thank you Shahzad for explaining so to use the 2 x zones from the keypad is programmed as input 73 & 74, there for leaving the 8 zones to be used in the main panel 👍
Great question I wondered the same
@@seilukgood idea
Excellent and very informative video! Thank you.
Is it possible to connect a wired doorbell button to the system board of the Euro-46 and then use its internal speaker (17:54) as a chime/doorbell ?
Thanks to watch my video and support my channel. I never tried but I think could work. I need to check how many volts come when panel gives trigger for chime. + is common and - come from panel when trigger. If you put bell you need + and - voltage always there on door bell. I need to check then I let you know.
@@seiluk Thank you for your swift response!
I already have a PoE SIP doorbell, but want to swap it for a HikVision DS-KIS605-P and was wondering if I could use the speaker that I already have for my Pyronix Euro46 and avoid adding a chime like the one shown in this video ua-cam.com/video/U7Cq-bXoqH4/v-deo.htmlsi=aCV_zyMobylZ_eBZ
This is a great video. I was a bit confused about how you did the loop for the internal sounder. Did you just cut the cables and then join them back up and only use two cables for the sounder? And assuming they go back to the panel under SPK and AUX+. Thanks
Hi, I like the way you show how to do the installation but I'm going to do the same Euro 46S and I haven't done it before but unfortunately I'm struggling with it, it has 2 door contactor and 4 sensors, by watching your videos it has clear for me but the 1st part of but I don't know how to do the 4 sensors and connections at the main box. Would you help me with it?
If you see on playlist all euro 46 videos then you understand how I connect and programmed all devices link below: ua-cam.com/play/PLhhdSobCeERGo6MlLZgaN7CEQt-qV9wH1.html
I have the same system, I am looking to remove some sensors temporarily for decorating, is there a way of putting the system into anti tamper? Deactivating the tamper settings until i have painted behind the sensors?
Hi leave system in engineering mode or user mode. If you don’t no engineer code then leave system in user mode. If you don’t know used this step:
Press D then press your code ???? then leave this mode. Now you can open sensor cover. After finish put cover back and press no no no then press A. Hope this is okay for you thanks to used pyronix system.
@@seiluk thank you I will try this!
For the motion sensors I want to wire two in Normally closed. The 12v+ and 0v should I connect it to the panel? And only one wire for alarm and 1 for tamper. Or two wires for tamper n alarm and still use the 12v and 0v
Yes 12v power for sensors from panel. 2 option if you used EOL connection as I show in this video then you used 4 wire 2 for power and 2 wire used for alarm and tamper. If you used alarm and tamper separate connection then used 6 wire connection. 2 wire for power 2 wire for alarm and 2 wire for tamper. Hope this Answer is ok for you.
@@seiluk ok thank you, would like some help programming the panel please and the remote
@@neilj2327 I have some videos in playlist euro-46 should watch all videos I show everything below link:
ua-cam.com/play/PLhhdSobCeERGo6MlLZgaN7CEQt-qV9wH1.html
Good day, I've managed to program most parts of the system. However in setting the alarm I'm getting unable to set 4 of the inputs. From 1 to 4 respectively, the motion sensors are working, the contacts connected to the zone expander are on input 9 and seems to be working. Please help urgently as this is my only set back in completing this alarm job. Will also need to figure out the siren to sound off when an alarm is detected
@@neilj2327 watch my this video I used sensor on expender below link: ua-cam.com/video/4bie0GYhUhg/v-deo.html
About external bell when alarm trigger bell will make sound automatically
Great job very neat
Thanks
Great video helped alot…
Can the control panel be configured via computer software or can it only be configured from the keyboard?
You can program via software see my video below link:
ua-cam.com/video/sj0aP3CiIL0/v-deo.html
Hi shahzad, can you tell me how to wire 2 external sounders together please?
Hi power, bell & strobe wire in parallel connect only T wire in series connect.
Salam Shahzad, how do I wire to 2 PIR that are joined in series and only 1 wire goes back to control panel?
i make video on 2 door contact in series wiring use 3 x 2k2 resistor and apply same connection on pir hope this link make help thanks to support my channel. ua-cam.com/video/uHEXXjqHNQc/v-deo.html
Excellent
Hi I just realised these are in the property I am renting are these cameras? Can people see me in my home?
If they have username password internet and ip number then they can see
@@seiluk I have noticed there is no lights on them so I’m not sure they are working. I’m hoping not! Freaked me out!
No not cameras they are pir detectors for inteuder alarm.
Hi Shahzad
I am having problem with home alarm, can’t set all set up A alarm. I can set up B alarm but when go upstairs front of upstair sensor alarm goes off. I think by mistaken I changed the setting. Is any chance can you please help me to setup. It’s Pyronix alarm
Go to change input select zone number which going off and don’t enable part B
@@seiluk
Thanks for your reply, is any chance can I call you?
My alarm keeps going off randomly when I’m home and the alarm is not set, no error codes appear? Can you help please
Do you have a video to add Wi-Fi to this system??
Sorry didn’t watch whole vid before I asked question 😂🙏🏽
ua-cam.com/video/4F0ejE5YmCs/v-deo.html
Video not very good maybe help you
Where is the wiring at panel end, you didn't show any of this!
Hi this is installation video how install all parts and quick programming. See video in details please follow below link:
ua-cam.com/play/PLhhdSobCeERGo6MlLZgaN7CEQt-qV9wH1.html&si=NKz9_dFBz5yBtcm5
Why don’t he show wiring into the pannel
He can't show you everything as he would be out of the job 😂