Just subscribed,glad I came across your channel.Us armchair operators love this stuff! Right tools,right machine, operator = Job well done.Excellent video Graderman,thanks for sharing.
I run grader for our highways dept here in BC. We have switched 140m's and our 160m's all to olafsen sharq edges now. The p300 blades for winter sure work awesome and we use theyre straight blades for summer. No more changing backboards or dealing with heavy blades anymore. Enjoy your videos!
That’s awesome I have run the sharq edges and I did like them a lot I got a new video coming out in a couple weeks of some new sharq edges I’m very impressed with the edges I’m trying out glad to hear you like the videos thanks for watching.
Thanks glad you liked the video I’ve been around a few 130G machines great machines and I gotcha we don’t use any salt so nice to have the right edges to make roads safer to travel on thanks for watching!
I've been around graders, but we don't need specialized blades in the gumbo soil of south east Texas. Maybe in the panhandle they need this occasional but not here 20 miles from Trinity Bay.
Greetings, Another Fine Vid - Thanks. Are those teeth spaced the same as on a Sandvig board / teeth ? I haven't had too this season, but plan on knocking out every other sandvig tooth, when and if we get hard ice. I was told, it should cut the ice easier, have better traction and not take as much Hp. Mild winter so far ! Averaging out last seasons record snow totals (plowing about every day last season). Thanks again for your educational Vids.
I belive that these boards are a little bit further spaced then the sandvig boards I would agree with you on taking every other bit out on them boards would cut better and not take as much power I’m suer it’s nice to have a more laid back winter after last year we’ve had a mild winter here up until last 3 weeks we’ve had lots of snow and wind. Thanks for the comment and thanks for watching!
Depending on what Sandvik boards you have they are spaced anywhere from 1-2" between the bits. The boards Graderman140M is running are the non-rotating carbide bits, those are spaced maximum 2.25" apart but there are wider bits available that bring that spacing down or touch each other giving you a full solid carbide blade. Like Graderman said if you knock every other tooth out that will help with cutting but make sure to keep an eye on the open holes in the board because if material is flowing through those holes it could wear the inside of the hole and might making it harder reinstalling the bits.
Do you have the blade in float, or do you have some pressure on it? I'm on my second season myself now, and it's a steep learning curve. Love to see your work!
I don’t have it in float I have a little pressure on it to keep cutting the snow and ice,yeah I can believe it’s a steep learning curve plowing snow in a grader is a challenge for a newer operator hopefully my videos will help you out and I’m glad you enjoy seeing me work thanks for watching!
Glad you liked the video and I’ve run these around the township and the middle teeth are wore pretty good but outside are still like new get very good wear life on these.
The next municipality over have been using those on their moldboard all year summer and fall at least. What's your thoughts on that? My municipality only has the soft steel blades with teeth. They wear out so fast, I've been thinking about pushing for these carbide ones. I think they use the same teeth as my mulcher..
I do like these cat style bits for cutting hard pack and ice and like them for mixing material in the spring I would recommend not running them through the summer though there to aggressive once roads get dry and hard these are to aggressive I’d recommend you look in to a rotating carbide bits like you have on your mulcher you can use them year round is what I’d recommend you use here is a link of what I run on the one blade hopefully have the same setup on this machine this spring. equipmentblades.com/products/carbide-faced-4ft-bit-board and here is the bits I use equipmentblades.com/products/c87wfrkcsb
Just curious, used to float the blade to maintain haul roads at a landfill. Made speedy work if it, as I had to jump around to other pieces of equipment throughout the day. Would hitting the floats work on ice? Stay safe!
I have a stupid question for you this is my first season of doing snow removal, few summer seasons. I was out blading some finger drifts yesterday and no matter what I tried I could not get the grader to quit hopping on me. I was just using the blade. If I didn’t do fast enough I wouldn’t throw off the snow. If I went slow I’d leave a ridge to catch drifts. Any advice at all would be much appreciated. I was using a grader without a wing just strait blading. In a 770 Deere.
I am also new at the job but I’ve learned that if you attach your dozer to the front and have it lowered enough it will bust up the small drifts enough so your front tires don’t ride over the drifts causing you to bounce. Good luck.
@@jmfrc there’s no such thing as a stupid question and unfortunately without a front plow of some sort you will continue to have your issues of bouncing that’s mainly why I also have my dozer blade on or my v plow or directional plow on my front end to break up the drifts to keep machine from bouncing thanks for the question and thanks for watching!
The main reason I pulled it to the center like I normally blade in the summer was is there were spots where there wasn’t much snow and ice and I was mixing a fair amount of gravel in with the snow and ice so I did it that way we did have a warm up and majority of it melted so it worked out great. Thanks for the question and thanks for watching!
I search for Kansas blade operators and this pops up. Would you be willing to tell me where you’re from? And would you be willing to contact me? I’m in NE Kansas and looking to improve and better myself in grading country gravel roads and in many instances I think we do things wrong and would like advice from others in Kansas and how they battle certain issues, challenges and circumstances.
Just subscribed,glad I came across your channel.Us armchair operators love this stuff!
Right tools,right machine, operator = Job well done.Excellent video Graderman,thanks for sharing.
Thanks for subscribing glad you like the videos thanks for watching!
I run grader for our highways dept here in BC. We have switched 140m's and our 160m's all to olafsen sharq edges now. The p300 blades for winter sure work awesome and we use theyre straight blades for summer. No more changing backboards or dealing with heavy blades anymore. Enjoy your videos!
That’s awesome I have run the sharq edges and I did like them a lot I got a new video coming out in a couple weeks of some new sharq edges I’m very impressed with the edges I’m trying out glad to hear you like the videos thanks for watching.
Cool video! Nice job. I plowed with a 130G for years. Unfortunately their answer to a scarifying edge was hundreds of tons of salt lol
Thanks glad you liked the video I’ve been around a few 130G machines great machines and I gotcha we don’t use any salt so nice to have the right edges to make roads safer to travel on thanks for watching!
Buen video amigo. te felicito me entretiene verte trabajar saludos desde Chile
Awesome video. The different camera angles are killer. Great looking carbide bit set up too eh!
Thanks Jack!
I've been around graders, but we don't need specialized blades in the gumbo soil of south east Texas. Maybe in the panhandle they need this occasional but not here 20 miles from Trinity Bay.
Yeah up here in South Dakota we can see all kinds of different weather so it’s nice to have specialized blades to deal with it thanks for watching!
Greetings,
Another Fine Vid - Thanks. Are those teeth spaced the same as on a Sandvig board / teeth ? I haven't had too this season, but plan on knocking out every other sandvig tooth, when and if we get hard ice. I was told, it should cut the ice easier, have better traction and not take as much Hp. Mild winter so far ! Averaging out last seasons record snow totals (plowing about every day last season).
Thanks again for your educational Vids.
I belive that these boards are a little bit further spaced then the sandvig boards I would agree with you on taking every other bit out on them boards would cut better and not take as much power I’m suer it’s nice to have a more laid back winter after last year we’ve had a mild winter here up until last 3 weeks we’ve had lots of snow and wind. Thanks for the comment and thanks for watching!
Depending on what Sandvik boards you have they are spaced anywhere from 1-2" between the bits. The boards Graderman140M is running are the non-rotating carbide bits, those are spaced maximum 2.25" apart but there are wider bits available that bring that spacing down or touch each other giving you a full solid carbide blade. Like Graderman said if you knock every other tooth out that will help with cutting but make sure to keep an eye on the open holes in the board because if material is flowing through those holes it could wear the inside of the hole and might making it harder reinstalling the bits.
Zieglers will bring me out a set to try out, they will even install them. I think I need to take them up on that!
I’d definitely try a set out they definitely are useful in certain situations.
Very Informative, What gear and speed are you ice cutting?
Glad to hear that and I was in 4th gear when I was cutting the ice thanks for watching!
Do you have the blade in float, or do you have some pressure on it? I'm on my second season myself now, and it's a steep learning curve. Love to see your work!
I don’t have it in float I have a little pressure on it to keep cutting the snow and ice,yeah I can believe it’s a steep learning curve plowing snow in a grader is a challenge for a newer operator hopefully my videos will help you out and I’m glad you enjoy seeing me work thanks for watching!
Great video all long does Triangle carbide last
Glad you liked the video and I’ve run these around the township and the middle teeth are wore pretty good but outside are still like new get very good wear life on these.
So satisfying to watch. I'm trying to figure out what area or township you are from lake county.
Glad you enjoyed watching it this is in wall lake township South of Hartford thanks for watching!
@@graderman140m I may need to take a trip down to see some live action
The next municipality over have been using those on their moldboard all year summer and fall at least. What's your thoughts on that? My municipality only has the soft steel blades with teeth. They wear out so fast, I've been thinking about pushing for these carbide ones. I think they use the same teeth as my mulcher..
I do like these cat style bits for cutting hard pack and ice and like them for mixing material in the spring I would recommend not running them through the summer though there to aggressive once roads get dry and hard these are to aggressive I’d recommend you look in to a rotating carbide bits like you have on your mulcher you can use them year round is what I’d recommend you use here is a link of what I run on the one blade hopefully have the same setup on this machine this spring.
equipmentblades.com/products/carbide-faced-4ft-bit-board and here is the bits I use
equipmentblades.com/products/c87wfrkcsb
Just curious, used to float the blade to maintain haul roads at a landfill. Made speedy work if it, as I had to jump around to other pieces of equipment throughout the day. Would hitting the floats work on ice? Stay safe!
I don’t have the blade in float the snow and ice is hard enough the blade in float will just ride on top of the snow and ice thanks for watching!
I have a stupid question for you this is my first season of doing snow removal, few summer seasons. I was out blading some finger drifts yesterday and no matter what I tried I could not get the grader to quit hopping on me. I was just using the blade. If I didn’t do fast enough I wouldn’t throw off the snow. If I went slow I’d leave a ridge to catch drifts. Any advice at all would be much appreciated. I was using a grader without a wing just strait blading. In a 770 Deere.
I am also new at the job but I’ve learned that if you attach your dozer to the front and have it lowered enough it will bust up the small drifts enough so your front tires don’t ride over the drifts causing you to bounce. Good luck.
@@levivilandre2571 there is no such attachment that exists where I work. I wish there was…
@@jmfrc there’s no such thing as a stupid question and unfortunately without a front plow of some sort you will continue to have your issues of bouncing that’s mainly why I also have my dozer blade on or my v plow or directional plow on my front end to break up the drifts to keep machine from bouncing thanks for the question and thanks for watching!
@@graderman140m no thankyou for the great videos.
I see you are pulling towards the center. With not getting that ice off to the shoulder, will it be hard packed again, or are you hoping it melts off?
The main reason I pulled it to the center like I normally blade in the summer was is there were spots where there wasn’t much snow and ice and I was mixing a fair amount of gravel in with the snow and ice so I did it that way we did have a warm up and majority of it melted so it worked out great. Thanks for the question and thanks for watching!
So you bladed both sides to the center? Then did a flat pass to knock it down?
@@Ranchpig67 I pulled one side to middle then cut from the middle to the opposite shoulder
How many miles a day
I search for Kansas blade operators and this pops up.
Would you be willing to tell me where you’re from? And would you be willing to contact me? I’m in NE Kansas and looking to improve and better myself in grading country gravel roads and in many instances I think we do things wrong and would like advice from others in Kansas and how they battle certain issues, challenges and circumstances.
Just keep watching his videos and you’ll have those doniphan county roads tip top shape.
I’m in SE South Dakota here so not a long ways away from you and yes send me an email at graderman140m@gmail .com and can answer questions for you.