@@HaiderAli-ot2gg yes lol. The lightweight hollow fiberglass and aluminum composites that weigh over 200 tons flying through the air at almost 500mph can smash through the light gauge steel curtain wall and the structural I beams. It would be hard to find something to stop that mass moving like that lol.
Not a bad video. We don’t use the term “I” beam though. They are called “wide flange shapes” since the shape can be used as a column, beam, or brace. That first picture of the base plate is a poor representation since the anchor bolt projection does not meet AISC requirements. The threads of the bolt must engage all the threads of the nut. These are too short. Lastly - don’t use this video as a means of steel Erection in accordance with OSHA Subpart R. I counted 3 “serious” and citation worthy violations. PPE and fall protection.
@@CDubs720 the armoured concrete - columns and beams - 300-400 Portland cement and wire-linked cemented construction steel rods (2/3”) is the preferable construction system, isn’t it? It’s a little longer. No matter how the building area is small and how they fill the walls between columns and beams, you need a week for every level and at least a month for the basis. E.g. not a large area of 150m2 , say 1 minimalistic (budget) apartment on every level, built in 3 to 5 months, for 5-apartments - building, from scratch (a pit) to roof, ready for exploitation.
The beams and columns in the world trade center flanges ranging from 1in to 3in thickness, and at that approximate time period they didnt use mild steel just yet, they used pig iron big and bulky, the reason why the Industry made the switch to mild steel is because pig iron was hard to cut and shape it wasn't malleable like mild steel that we have today. How do I know This? Because I am a 15 year union Ironworker vet, stay woke safe travels✌
4:04 whoa! Major OSHA violation! No fall protection and can't use material to support yourself if it's not secured in place. Same issue at 4:40 Guys at 5:04 should be using a lift or scaffolding.
Columns will be levelled first to achieve perfect bottom of base plate elevation, there are several levelling types like using of levelling nut, shim pack method, levelling plate method. Please review these for more information
Wow, My best friend, I liked the video very much, thanks you for sharing, stay safe, stay blessed
such a clear video. I am looking forward of checking other steel related videos from your site, thanks
Great vid! Good reference for someone starting a home project.
Now that’s the type of content I’m after ;)
Same
Tasty 👅
@@jarius1813 same
@@callumcoady8030 ¹unihnn. Bu gy522hve8okk9⁹kkmcnju7876yhvbbnnbgfd
Great video
awesome video, simple and informative!
literally saved my life, u deserve a kiss
AMAZING
Nice job
Thanks for the Video needed some pointers for my future project. Cheers !
I know this question probably needs a long answer but I’ll ask anyway. Why do you choose steel frame for som projects and concrete frame for others?
great content, thank for the video.
this video was perfect at doing its intended purpose stated at the end of the video
Very good thanhs you ha noi viet nam
Very helpful, thanks for posting.
Good stuff!
Great video Sir, thank you:)
Great tutorial!
Good info👌
On point. 👌
Helping with my architecture class ty
Thanks for the video!
Very good video!
👍👍
at 1:13 a adjustable template for anchor bolt placement is shown.. where can you buy those?
Thank u sir for the vìdeo it helps me to work alongsìde the engìneer wìth my upcomeìng project.
Amazing video, Thank you!
Fantastic presentation.... so where did they find those dynomite Setting Plates?
Fabricator will supply anchor rods, setting plates everything.... To site
It always amazes me how tiny some of the gusset's are on some of the larger main frames.
What do you call these engineering drawings which are shown in the videos?
I am a developer in Cambodia. I am very satisfied with the work in your country, please advise, thank you
Sir, How can I prevent cracks in non-loading partition walls due to deflected steel structural beams' interaction?
Don't allow drugs on premises.
😅@@dreamfunction4491
Can a Boeing 767, made of lightweight hollow fibreglass and aluminum composites, fly through structural steel?
Hells no🤣 911 was an inside job
Yes lol, the fuel can heat it enough to make it pliable
@@JohnnySack16i’m talking about the penetration through the steel
@@HaiderAli-ot2gg yes lol. The lightweight hollow fiberglass and aluminum composites that weigh over 200 tons flying through the air at almost 500mph can smash through the light gauge steel curtain wall and the structural I beams. It would be hard to find something to stop that mass moving like that lol.
@@JohnnySack16incorrect
thank sir
thank you
Not a bad video. We don’t use the term “I” beam though. They are called “wide flange shapes” since the shape can be used as a column, beam, or brace.
That first picture of the base plate is a poor representation since the anchor bolt projection does not meet AISC requirements. The threads of the bolt must engage all the threads of the nut. These are too short.
Lastly - don’t use this video as a means of steel Erection in accordance with OSHA Subpart R. I counted 3 “serious” and citation worthy violations. PPE and fall protection.
Thanks for you
thank you for sharing
which is stronger steel frames like this or concrete (with steel bars)???
Depends on the size of the individual members that make up the structure.
@@CDubs720 the armoured concrete - columns and beams - 300-400 Portland cement and wire-linked cemented construction steel rods (2/3”) is the preferable construction system, isn’t it? It’s a little longer. No matter how the building area is small and how they fill the walls between columns and beams, you need a week for every level and at least a month for the basis.
E.g. not a large area of 150m2 , say 1 minimalistic (budget) apartment on every level, built in 3 to 5 months, for 5-apartments - building, from scratch (a pit) to roof, ready for exploitation.
TRUE Steel columns attach w/ anchor bolts
TRUE corrugated metal keeps frame in square.
Oh yeah, this is good .. btw will this withstand the thermal stress from jet fuel ...
Nothing stops Jet Fuel. Jet fuel induces immediate structural failure and collapse.
homertalk 😂😂😂✈✈✈✈lol
lol ...Only if the rothschilds are not involved ;)
The beams and columns in the world trade center flanges ranging from 1in to 3in thickness, and at that approximate time period they didnt use mild steel just yet, they used pig iron big and bulky, the reason why the Industry made the switch to mild steel is because pig iron was hard to cut and shape it wasn't malleable like mild steel that we have today. How do I know This? Because I am a 15 year union Ironworker vet, stay woke safe travels✌
Lol
Sir..
How to check perpendicularity between c channel and plate....
And
Join procedure of plate to I beam ....
Plates will be welded all around to column,but I can't understand your first question
How to make floor.
Does anyone know how thick the box columns of the World Trade Center were?
Thank you! Great tutorial!
4:04 whoa! Major OSHA violation! No fall protection and can't use material to support yourself if it's not secured in place.
Same issue at 4:40
Guys at 5:04 should be using a lift or scaffolding.
...thanks...
Where can I get a setting plate like the one displayed?
Those are typically fabbed up by the beam fabricator.
Royal CIVIL 3-B👍
Where can I get this videos
How do engineers two distant column is at same level for beam in place perfectly horizontal?
Columns will be levelled first to achieve perfect bottom of base plate elevation, there are several levelling types like using of levelling nut, shim pack method, levelling plate method. Please review these for more information
@@maradanipraveen882 thanks so much
@@emmanuelalfonso8943 welcome. Refer American institute of steel construction code AISC for more information
Class brought me here
yop lads anyone come from the goat herself cathy
CMA Engineering fabrication works
Ten by Ten square
it will callapse in a free fall from a simple office fire
Guys, is it a good idea to build a 1-floor house using a steel structure?
Why not
আপনাদের সাথে যোগাযোগ করার ব্যবস্থা কি?
Unitize us