You can very easily make a cheap and effective suction tool using a medium size syringe and a piece of transparent hose (6x10mm) to measure the height of the air chambers. Measuring the height of the air chambers using a measuring tape is difficult, especially when using very clear (not coloured) oil. Use a clothespin to mark the right length of the hose you insert into the air chamber.
Even without drilling, the valve will greatly increase compression damping at low suspension velocities (when riding over smooth pavement). But yes, it will not do much at higher velocities (when riding over rough surfaces, especially at speed).
@@alanridley2917 That's exactly what should on a fast square edge hit... suggest you read Paul Thede's discourse on valve emulators (invented the original RaceTech emulator).
อยากให้ทำหลายๆรุ่นเลยครับ ติดตามครับและก็เป็นลูกค้าอยู่
You can very easily make a cheap and effective suction tool using a medium size syringe and a piece of transparent hose (6x10mm) to measure the height of the air chambers.
Measuring the height of the air chambers using a measuring tape is difficult, especially when using very clear (not coloured) oil. Use a clothespin to mark the right length of the hose you insert into the air chamber.
อยากดูวิธีเซ็ทของ Forza350 ครับ
Usta kolay gelsin uzun olan yay ters takıldığını sökmeden nasıl anlarız ve bi zararı olurmu şimdiden teşekkürler
Why do you assemble any suspension other than the Xmax suspension in the middle of the video?
why the heavy part of sprig is down?or is does not mutter if isup or down.thanks.
After install the fork kit, i heard the noise("ko ko ko") form the fork when running my xmax 300 . Is it normal or some mistake i made?
ภูเก็ตทำเจ้าไหนได้บ้างครับ เวฟ100
What improvements are made after installing this upgrade kit?
ผมถามหน่อยครับ น้ำมันโช๊คหน้าที่ติดมากับกล่อง fork upgrade kits ของxmax น้ำมันเบอร์ 15w ปริมาณ 250ml มันพอต่อ โช๊ค 2 ข้างหรอครับ
ไม่พอครับ เป็นน้ำมันที่แถมไปให้ลูกค้าต้องซื้อเพิ่มอีกขวดนึงครับผม ใช้ข้างละประมาณ 210 ml ครับ
i am talking in the beggining of youe video when you pull out the oem spring.
It seems the spring was mounted upside down. Normally the fine windings are on top.
It's available for MIO SPORTY??
HOW CAN I FIND THE 15' MT-07 MANUAL?
How many ML that stock fork oil for xmax300?
น็อตหัวแดงข้างบนมีวิธีการปรับยังไง
No enlargement of the damper rod ports, so the valve won't be doing much...
Even without drilling, the valve will greatly increase compression damping at low suspension velocities (when riding over smooth pavement). But yes, it will not do much at higher velocities (when riding over rough surfaces, especially at speed).
Why would you enlarge the ports? The idea is to slow and regulate the oil flow……not increase the flow rate when you hit a pothole
@@alanridley2917 That's exactly what should on a fast square edge hit... suggest you read Paul Thede's discourse on valve emulators (invented the original RaceTech emulator).
ช่วยได้จิงหรอ ใส่เป็นวาวล์น่่จะเห็นผลกว่านะ