Thank you for watching our video. To check the transmission oil level, the vehicle needs to be brought up to the correct transmission oil temperature and with the engine idling.
Thank you for watching our video. The vehicle featured is fitted with a conventional automatic transmission. The oil used was Blue Print part ADG05532, this and all our many other replacement parts can be found at www.partsfinder.bilsteingroup.com
Good day, I bought a Febi Bilstein transmission filter kit for a 2011 i10 1.2. I see I have received an oil pan gasket. Can I use that gasket, or should I use the gasket maker/sealer. I still have to perform the service and want to make 101% sure I have everything ready before tackling the task. Regards
Thank you for watching our video. We supply two kits, one with the filter and one with the filter and oil pan gasket. Depending if the original oil pan was sealed with a gasket or sealant, then use how it was originally sealed.
Thanks a million, I ended up sealing it with Victor Reinz. I didn't want to risk it with the gasket, and then it leaks, just giving it 24 hours to cure before I add the fluid
Thank you for watching our video. Unfortunately we currently do have this part in our range. However, please check out our online catalogue www.partsfinder.bilsteingroup.com to find many other parts for your car. We also have an interactive feature called FANS, where new suggested parts can be added to give us quality market feedback for your demands.
Hola buenas tardes en el drenado de aceite en cuanto deje de salir aceite es apagar el vehículo o después de que deje de salir aceite de esa manguera es tenerlo 60 segundos?
Thank you for watching our video. The procedure for draining and refilling the automatic transmission oil is as follows: 1) Disconnect oil cooler return hose. 2) Ensure selector lever in 'N'. Start engine and allow to idle. Drain ATF from oil cooler return hose. NOTE: Switch OFF engine within one minute or as soon as ATF has drained out. 3) Remove drain plug and drain remaining ATF. Refit drain plug. 4) Fill transmission with specified amount. CAUTION: Specified amount may overfill transmission. 5) Ensure selector lever in 'N'. Start engine and allow to idle. Drain ATF from oil cooler return hose. NOTE: Switch OFF engine within one minute or as soon as ATF has drained out. 6) Fill transmission with specified amount. Reconnect oil cooler return hose. CAUTION: Specified amount may overfill transmission. 7) Start engine and allow to idle for 1-2 minutes. Select each gear, then return selector lever to 'P' or 'N'. Check ATF level. 8) Drive vehicle and repeat level check when ATF temperature has reached 70-80°C.
Thank you for watching our video. The quantity of gearbox oil required for the vehicle featured in this video was 6.1L of Blue Print ADG05532. Please check our partsfinder catalogue www.partsfinder.bilsteingroup.com for more details.
Thank you for watching our video. The oil should be drained in the neutral position. Then after the refill process has been completed, the gears should be selected as per the video. Then the oil level rechecked in the park position.
Do we need to check the transmission oil level at idling or switch off the engine after it's warmed up?
Thank you for watching our video. To check the transmission oil level, the vehicle needs to be brought up to the correct transmission oil temperature and with the engine idling.
Hello
I’d like to ask is this a CVT transmission?Or the ATF ?
Which oil can be use for this car
Thank you for watching our video. The vehicle featured is fitted with a conventional automatic transmission. The oil used was Blue Print part ADG05532, this and all our many other replacement parts can be found at www.partsfinder.bilsteingroup.com
Good day,
I bought a Febi Bilstein transmission filter kit for a 2011 i10 1.2. I see I have received an oil pan gasket. Can I use that gasket, or should I use the gasket maker/sealer. I still have to perform the service and want to make 101% sure I have everything ready before tackling the task. Regards
Thank you for watching our video. We supply two kits, one with the filter and one with the filter and oil pan gasket. Depending if the original oil pan was sealed with a gasket or sealant, then use how it was originally sealed.
Thanks a million, I ended up sealing it with Victor Reinz. I didn't want to risk it with the gasket, and then it leaks, just giving it 24 hours to cure before I add the fluid
Would you know where I can get a dipstick for a Automatic Transmission Gearbox for Hyundai i10 08
Thanks Gerry
Thank you for watching our video. Unfortunately we currently do have this part in our range. However, please check out our online catalogue www.partsfinder.bilsteingroup.com to find many other parts for your car. We also have an interactive feature called FANS, where new suggested parts can be added to give us quality market feedback for your demands.
How will I identify which of the two hoses is the transmission oil cooler return hose?
Thank you for watching our video. When viewing the hoses from underneath the vehicle, it is the one on the right.
Hola buenas tardes en el drenado de aceite en cuanto deje de salir aceite es apagar el vehículo o después de que deje de salir aceite de esa manguera es tenerlo 60 segundos?
Thank you for watching our video.
The procedure for draining and refilling the automatic transmission oil is as follows:
1) Disconnect oil cooler return hose.
2) Ensure selector lever in 'N'. Start engine and allow to idle. Drain ATF from oil cooler return hose.
NOTE: Switch OFF engine within one minute or as soon as ATF has drained out.
3) Remove drain plug and drain remaining ATF. Refit drain plug.
4) Fill transmission with specified amount.
CAUTION: Specified amount may overfill transmission.
5) Ensure selector lever in 'N'. Start engine and allow to idle. Drain ATF from oil cooler return hose.
NOTE: Switch OFF engine within one minute or as soon as ATF has drained out.
6) Fill transmission with specified amount. Reconnect oil cooler return hose.
CAUTION: Specified amount may overfill transmission.
7) Start engine and allow to idle for 1-2 minutes. Select each gear, then return selector lever to 'P' or 'N'. Check ATF level.
8) Drive vehicle and repeat level check when ATF temperature has reached 70-80°C.
How many liters it need this gear thankyou
Thank you for watching our video. The quantity of gearbox oil required for the vehicle featured in this video was 6.1L of Blue Print ADG05532. Please check our partsfinder catalogue www.partsfinder.bilsteingroup.com for more details.
Ich hava a question. When do you have to put it again in P? Once the oil has drained or after filling new oil?
Thank you for watching our video. The oil should be drained in the neutral position. Then after the refill process has been completed, the gears should be selected as per the video. Then the oil level rechecked in the park position.
At what milage should this A/t oil be changed?
Thank you for watching our video. The vehicle manufacturer recommended interval is every 60,000 miles or 72 months, which ever occurs first.
How much atf oil use the car? Pls thanks for the video
Thank you for watching our video. The transmission oil capacity for the vehicle featured in this video is 6.1 litres.