Digiprog 3 Review
Вставка
- Опубліковано 11 січ 2017
- Yanhua Brand/Factory digiprog III is suppose to be of better quality, mine is likely out of the lesser factory.
My Digiprog III V4.94 experience: Frustrating touch screen, sketchy eeprom reading and OBD2 port not very well supported.
Lets hear your experiences in the comments. - Наука та технологія
best review online for this tool... you make great videos!!!
Thanks! It's unfortunate I ended up with a lesser quality unit on this one.
Jeff, I need your help, do you know if I can program EEPROM and convert km/h to mph for Japanese cars. Toyota Prius?
imin uk wat about uk model vehicles and do u need different cables for each vehicle thanks you buddy great video cheers from ireland
I just don't understand. I watched a lot of videos. Explain to me which car has the control panel disassembled and which car has been programmed with the OBD connector. For example, can the Ford f-150 since 2015 be programmed with the OBD plug?
please advise me
Sr What are in your opinion the three best mileage correction and why. Thank you.
I have a test cluster from an 04 Ford with a Motorola chip. I would assume most of the fords are similar. What method do you use? I've seen someone solder wires on the back to the factory programming pads or can you use the odb port?
I've had luck with dodge through the obd port. I think ford also, but don't remember details, its been a long time since I've needed to correct a ford.
Are you able to use the IC clip to modify the mileage of the later 2005 GMT800 trucks since the eeprom is in an accesible area?
I no longer have this programmer. But it should work that way.
just got my ftdi digiprog 3 4.94, so far tried on a 2004 a4 by obd and was perfect, read 24c32 out of circuit and was perfect although in circuit I had trouble but I believe it may be the soic clip as its crap.
well guys got one and the st01 cable was busted was giving me wrong readings and once i change the st01 problem solved and is working fine
Hi, I have a Lotus Elise 2004. My tacho is in Miles. I want to convert it to km. Is this possible with this device?
hey Jeff, what American odometer correction tool would you recomend for a tech who will be perfoming Canadian to American conversions?
Bill Miller
for the few conversations I did it was just a matter of swapping the face and changing the units of measurements in the menu settings. No programmer needed. But every make and year is going to be different.
Hello.
can I use this tool to change miles to km in my toyota corolla 2014 ?
For what type of cars it works? All cars by obd to change mileage
Hi friend, do you know how to make a 2018 Honda Civic? where is the chip programer ???
I have been trying to find cluster programming tools. I have turned down several jobs to replace broken clusters. I have been picking up clusters from car rockers. I have finally found something that I like working with my brain lol
I hope you do tool box tour.
I wouldn't recommend this programmer, but some day I'll do a tool tour.
Hi ! Great video best review on digiprog I've seen !! A fan now totaly, great help on mechanics.
But does it work on every motorcycles Jeff ?
Do you now the Pinout for captiva 2008 claster if you don't mind thanks
Can you use on aygo/ c1/ 107??
I am in Jamaica and mostly have Japanese cars to correct there mileage. So I was looking at Digipprog3 and also Tachoprog3. Thus, I saw your post, and also observed that you used both of these machines.
The vehicle YEARS range from 2008 to 2014, sometimes up to 2016, Toyota, Honda, Subaru, Mazda, Nissan, BMW, Benz, Audi and VW, yo name a few.
What would be your advise on which of the two (2) diagnostic machines to be used to cluster mileage issues?
Why are you correcting so many newer clusters that normally don't fail, with some evening maybe being under warranty?
Do you work for a car lot that rolls back odometers?
@@jeffescortlx why do you care ??
@@steve5912 because it's very suspicious.
Jeff, is there a unit that works well with 2005-2009 Ford mustangs? I have decided to try and start instrument repair as kind of a side hobby and have several Ford mustang clusters from previous race car builds i would like to play around with. How ever I'm not finding much of anything that supports Ford mustang. Even the tacho pro 2008 does not list the Ford mustang as a supported vehicle.
Sorry I don't have any useful advice for you. All I can tell you is, there isn't going to be much aftermarket 3rd party repair support for something that doesn't commonly fail and need repair.
will this work on nissan nv200?
Gif it's not in the options menu, it means it's not supported yet, right?
Do you know the pin out for a 15-18 mustang cluster? Can’t figure out which pin to use to correct the mileage
Sorry I'm not familiar with that one.
Good job
Can u do Vauxhall insignia 2016 ? Thanks
So three years later, what would you recommend? Do you know if these have gotten any better with software updates? Or has there been updates? Still seems like the cheapest way to correct mileage, as these are around $100.
The cheapest way is to get a eeprom reader and use a edditor program on a PC, I believe tachosoft is one. Otherwise I use a old tachopro and/or x100 OBDstar for making new eeproms for busted odometer error clusters.
@@jeffescortlx I later read in the comments you returned this unit. Can the x100 make mileage adjustments? I've seen you use it in another video for adding trans temp I believe.
@@taylordiehl6594 yes, but neither can program VIN options. What is it your trying to do?
@@jeffescortlx Just looking to match a similar year/options cluster mileage. Say I rebuilt one with 200k miles and a guy needs one with 185k miles. I just rebuild a few here and there and sell complete, but even having 10 or so laying around I usually don't have one within 10k miles of what someone needs.
@@taylordiehl6594 I always reccomended to keep the original cluster with the vehicle. This way you won't run into VIN trim/programming or odometer matching issues. Leave throwing in some random cluster as a very last resort if the original cluster is no longer around.
Can this memorize the old value/dump file in storage? For later use to add to another chip?
Yes you can read and save epprom data in the machine and write it to a same series chip later.
can u adjust the millage in 2010 Honda insight thx
Hello,
I am looking to buy an odometer adjuster, however, not sure which one(1) to by, So I have narrow done to two(2) units. They are
1. Digi Prog3
2. Tacho Prog3
I need your held to see if one of these machine can adjust vehicles from 2011 to 2014 vehicles.
I would really appreciate your sound advice. Reason for these two(2) machines is because of the cost associated with each.
collin williams
It depends on what part of the world your in and what manufacturer of vehicle your trying to adjust.
Sir collin can u please help me how to rollback odo meter im from indonesia
Jeff will that work for a Dodge ram pickups?
I have no idea. Mine was basically not usable and I sent it back immediately.
My Speedo needle quit working. What's your info I would like to get it fixed
If you click to go to my channel main page you'll see a "about" tab. There you should fine my email address or you can use the private message button.
Hi jeff what your recommendation for correction odometer device live in Australia
It would depend on the make/model of vehicle your working with.
Where do I change codes for EEPROM using digiprog 3
I'm trying to find a decent tool. Where did you buy your tachopro?
Well I wouldn't call the tacho pro decent. Its typical Chinese quality that "works" but is buggy. A buddy passed it on to me. But these things are all over eBay.
Thanks for the reply! I've found them all over eBay. Is there any difference in the tool for the price? I'm trying to get Canadian clusters in miles on 2004+ Ford and 2004+ dodge trucks. Do you know if I'll need any extra cables/adaptors?
I've only used the tacho pro on GM's. I'm not sure how well it works on Ford's and dodge. Maybe the OBDstar X100 would be a better choice. I have used that on both and worked.
@@jeffescortlx I used on Ford Mondeo MK4 (2008) and works great. Used only OBD cable
can someone explain to me what the procedure is for Renault Laguna 3?
what will be the best tools for Lexus IS300H, will this work
Sorry I'm only familiar with GM's.
Hi Jeff. Thanks for the video.
You seem to know something about speedos, and might answer to my question.
I had to change the speedo of one of my cars, a volvo v40 from 2001. The problem is that the car is 180000km, and the one I have as replacement is near 400000km.
From what I've read, the chip where the km are memorized seem to be a 93c56. Digiprog infos tell that I need to reprog via chip. Now, as I have to de solder the eprom to plug to digiprog etc, can't I simply remove both eproms and simply cross them?
I'm not very familiar with Volvo, but I would expect you should be able to just swap eproms if everything is the same
@@jeffescortlx thanks for the reply I'm going to try this weekend. Let's find out :)
@@djvarizes How did just switching the eeproms go for you? Curious as if it worked?
@@dtnel hi Dale. Have not tried yet. I've cut a finger 2 weeks ago and I'm not yet able to make it. I'm going tomorrow to partially remove stitches, and if everything is fine, I'm going to try this weekend
@@dtnel hi. Well, it has worked. Sort of..
My problem was I wanted to put the original km on the "upgraded" speedo (infocenter software).
The km are OK, not the infocenter. From what I could test, the infocenter is: either installed on the same eeprom of the km, or coded and if you switch the eeprom, it doesn't show.
My guess if for the 1st option, as I've crossed the eeprom, and the infocenter moved away with...
Please can you help me with digiprog 3 clone blue
Will it work on Toyota avensis 2011 with eeprom 93c66
Any issue?
Sorry I do not know. I don't have a digi prog.
So will this work with odb2 ? I have a 2006 forester XT that I would like to correct the mileage of ( currently has 201000 but should be 301000)
Sorry I'm not sure, I returned this 6 years ago.
@@jeffescortlx all good :) any recommendations for something more modern :)
@@IainMcfly sorry I'm not familiar with what works with the Forester. What happened to the original instrument cluster?
@@jeffescortlx I think the dealership swapped it ….
Good video! Could you do a review on the tacho pro?
I probably wont. As it's also a little buggy, and I only need it for 03-06 GM's. For some reason it wont go lower then 6500 hours. But odometer correction works. Just requires eeprom removal. Typical Chinese tools, works just good enough that you don't want to return it.
jeffescortlx do you know any tool that makes corrections without eprom removal?
Bryan Ace for 03-06 full size GM's, nothing other than a tech2 with passthrough and AC Delco subscription.
do you have any suggestions for best unit for the money????? mileage correction tool.
For domestic I've been using a OBDstar x100. It's not cheap at $350, but it's also a scan tool, ignition immobilizer, and can read, store and copy just about any eeprom.
What will do Nissan Navara 08????? Odo correction
Cool
What is the name of the tool that you said actually works?
Tachopro works good on stuff older than 2007. Otherwise Obdstar X100 is my other tool for reading/writing modifying BIN files.
Do you know of any other tool that is better then the one you are using
Currently using obdstar x100 pro.
I have no problem with my box ,, i uesd with my car Audi A3 TDI 2000 facelift and its work perfect
What do you recommend for a device that works Well on GM's Clusters
In my odometer repair video I use the obdstar x100. It does what I need it to do.
Will this work on a 2005 Silverado cluster? TIA.
If it's any thing like the one I had it won't program anything well. Don't get the cheap knock off.
Understood. Thanks Jeff!
How much does it cost digiprog3? Somebody help I'm from South Africa
$100-200 on ebay
That looks like junk. They say you get what you pay for but no one ever says there product is junk and your going to have problems, it’s always how great they are. I say I’m paying for the product that’s being described as great and I’m getting a falsely advertised piece of junk. It’s very frustrating navigating the ocean of crap out there, if they said it’s crap or broken in the box I wouldn’t buy it.
Is this tool able to convert from Kilometres to Miles and have the cluster continue to register in miles afterwards?
No I don't believe so.
Original Yanhua digiprog iii is the best quality, but it stop production at last year, original yanhua digimaster iii also with good perfermance, can correct odometer, decode audio, reset airbag (SRS), program ECU and program key (for Mercedes and BMW).
www.uobdiishop.com/digimaster-3-digimaster-iii-original-odometer-correction-master_p0349.html
It’s good for Citroen saxo vts year 2000
What happens if you dont remove the eeprom from the board?
In some clusters, like the 03 and 04 full size GM's, it's physically impossible to use a clip as the VFD is over the top of it.
I once tried to use the tacho on a e46 eeprom for correction and for some reason I blew the "chip" or whatever it was. I had to take it to someone professional to fix it. I used pretty much the exact same "clamp" you use in the video (that was in the instructions I followed).
Any ideas on why I blew it?
@@Rockelement you probably either installed the clip backwards or had a pinout setup for some other chip.
Never took the chip out. And it read a milage that wasn't correct with the vechile..sort of weird. After I installed the cluster back it was all "fuu$%&" up. I followed a poor chinese "diy"..So prob not a smart idea to begin with. Do you have a manual or something that's legit that you follow when you work on cars?
There are no manuals that I know of. No components level or schematics documentation that I've seen. But I don't mean block diagram wiring diagram.
That looks like the in-circuit style of EEPROM clip, it's probably not the best for out of circuit use.
makomk
You may be right. But it's the clip that was included with the kit. It's what the digiprog calls for, and it can only read and right off the board.
makomk
But now that I think of it, my testing rig has the same style of eeprom clip, but doesn't have any trouble reading from the clip off the board.
jeffescortlx hey Jeff I'm in the market of purchasing one myself , I have a 2016 jeep grand Cherokee overland I needed to role back the mileage would this work? Please email need a little more incite on this before I screw something up on my car then spend more then what I was trying to save. Thank you. Bmarte87@yahoo.com
you did the back up thats why it read same mileage
Ben Johnson
Opening a back up file sure wasn't what I was intending it to do. I was trying to just get a read off the eeprom. User interface could use some polishing.
Can't help me to solder the cable 48 for captiva 2008
mate i think the problem is that this device is only reading in KM as you can see
therefore it shows a large number when reading miles
Can change it to miles or kms in setting ,but some clusters no matter what it reads it in miles or kms only.
Does this work on Peugeots
Yes by chip
Sir? Can this tool rollback odo meter?
How we can finde in ethiopia??
where do you buy this?
Lorenzo H
ebay.
Amazon
Good morning I’m having serious problems can you help me please
Neal Johnson
Call 911
motorcycle can change the mileage?
Yes by reading the eeprom data and changing mileage. Some bikes can be done by obd2 but those are high end $10,000 up machines where you pay thousands a year to upgrade.
i just replaced my cluster on 2008 Chrysler Sebring .and is not working for that vehicle.
Why did you replace the cluster?
was not working .. Light was gone and i try it to fix that and i guess i fucked up .
How did you try to fix it? It would be easier to swap the eeprom's then it would be to purchase this tool and figure out how to run it.
No I am a technician.
Why aren't you repairing all these clusters rather than replacing/correcting?
Also destroyed my cluster
Allen Davis how you destroy cluster?
@@aduntoridasful last we heard Allen had a sex change and only goes to ustube.
Screen not clear.
That is a cluster fuck of a tool but it works... eventually anyway
you must have a bad unit. mine is working perfect , no problems in the la 3 years or so..
Do you have all the sockets? I have only two sockets.
Mine also works just fine. No problems so far in one year.
touch screen is terrible on mine
Aliexpress bro
You do not give to screen
indian bike
Chinese it always sorta works but not really 😂.if u wanna do it for a hobby then Chinese is ok but anything for a job stay away👌
Grand champ Champ
Very true. I have a mixture of name brand and Chinese equipment and tools. The Chinese stuff works 100% perfect 90% of the time.
But it's hard to complain when you can get the stuff for so cheap.
New buy but need password
Did you try "1"?
jeffescortlx thanks 1 work
My buttons do not work in lower left so, useless trash.
Lmao you on DK?
DK?
In short? Junk waste of money
Ruke vam se osusile
that gadget is a piece of s##t!