for larger boat.. I want to use some plywood to create the cross sections..and then use the foam for shaping between the plywood cross sections. Then.. use this to build the "Plug". I like your solution to use paper as barrier to allow you to then overlay the fiberglass. Smart and cheap. I think this is a very cheap way to build the plug, and then you can do a Form and make multiple Hulls out of it. NICE!!
For the bottom of your boat you could have used much thinner foam material and given you more internal depth to set in . With as lite as your foam boat is it will have a very little draft and be quite high in the water .
I liked your idea👍🏼.. But the video is too fast and without explanation. Can you please remake this 😅.. For instance.. From 6:00 to 6:17, what is that? Can you provide the measurement if it is not too much for you.
Ficou muito bom seu trabalho! s Uma dica para isolar o isopor. pode usar massa oleo para cobrir, depois lixar, e só fibrar com resina. ou usar uma tinta epoxi e pintar para isolar o isopor. ou uma cola epoxi pincelada. A fibra do casco, aplicar com rolo de ceda para ficar mais liso.
Hi, do you have the project or blueprint to share? I'm looking for detailed plans or templates for constructing kayak, and I’d appreciate any resources or suggestions you might have. many thanks in advance
Okay you used tossed foam (great thinking) Several questions? What is the red/pink liquid used to make bond foam sections together? Where you get foam cutter? Which grit sandpaper used?
Sapo used #300,#600. Pink bond is styrofoam bond,There are also transparent materials. But the foam is white,I used pink to check the distribution. I bought a form cutter online. I'll leave the site address in the description.
If you glue the fibreglass directly to the Styrofoam, the Styrofoam melts. To prevent that, I put on a newspaper, but there was a little problem, so I found another way to solve it. I hope you watch the next video. Thank you.
Well done, can't wait to see part 2 and finally on sea!!
After testing in the river, we go to the sea. ^^
for larger boat.. I want to use some plywood to create the cross sections..and then use the foam for shaping between the plywood cross sections. Then.. use this to build the "Plug". I like your solution to use paper as barrier to allow you to then overlay the fiberglass. Smart and cheap. I think this is a very cheap way to build the plug, and then you can do a Form and make multiple Hulls out of it. NICE!!
saan po pwd mag order Ng styrofoam
Hey doggie....
I like your idea.
Excellent build!
Thank you very much.
For the bottom of your boat you could have used much thinner foam material and given you more internal depth to set in . With as lite as your foam boat is it will have a very little draft and be quite high in the water .
Muchas felocidades gran trabajo, pero para cuando estara lista la parte 2 de este proyecto?
Great Work! ❤️
Wow amazing bro up2 k
I liked your idea👍🏼.. But the video is too fast and without explanation. Can you please remake this 😅..
For instance.. From 6:00 to 6:17, what is that?
Can you provide the measurement if it is not too much for you.
We are working on a remake. Please wait for the next video. Thank you.
so creative..
great job! what kind of glue do you use for paper and do you dilute the glue with water ?.. can I use glue PVA D3 ?
Paper coating can be omitted.
Coat with sodium silicate and talc
It is shown in the video.
Thank you.
Fantastic - Super - Magnificent 🏆✨💪
Ficou muito bom seu trabalho! s Uma dica para isolar o isopor. pode usar massa oleo para cobrir, depois lixar, e só fibrar com resina. ou usar uma tinta epoxi e pintar para isolar o isopor. ou uma cola epoxi pincelada. A fibra do casco, aplicar com rolo de ceda para ficar mais liso.
Hi, do you have the project or blueprint to share? I'm looking for detailed plans or templates for constructing kayak, and I’d appreciate any resources or suggestions you might have. many thanks in advance
I am building one of these and hope to learn from this so my video will be good to
Currently, we are making another boat with Iso Pink Board. After a while, the video will be uploaded.
Let's take a look at your video.
@@MrKeywave I should be starting my foam kayak in a week or two and you can see the foam in the back ground of the current foam boat video
what kind of glue did you use as an adhesive for the paper to stick into the styrofoam?
I'm subscribing for this
Thank you so much.
Okay you used tossed foam (great thinking) Several questions? What is the red/pink liquid used to make bond foam sections together? Where you get foam cutter? Which grit sandpaper used?
Sapo used #300,#600. Pink bond is styrofoam bond,There are also transparent materials. But the foam is white,I used pink to check the distribution. I bought a form cutter online. I'll leave the site address in the description.
Curious why you used newspaper rather than fibreglass, surely that's not very strong?
If you glue the fibreglass directly to the Styrofoam, the Styrofoam melts.
To prevent that, I put on a newspaper, but there was a little problem, so I found another way to solve it. I hope you watch the next video. Thank you.
@@MrKeywave not if you use the right kind of resin!
Currently, frp coating work is in progress using 300g/m2.
Hi. and the continuation of the project?
what did you use to glue the paper
part 2 link pls.
I'm working and editing as much as I can. Hold on a minute, please.
sure bro, i really this video,
What kind of glue to use in sterophoam?
Use a styrofoam adhesive. It is easy to get it from the tool shop.
Good
Thank you.^^
Cool project...even cooler if you narrated or a little muzak.
Your advice was very helpful. I'll make sure to refer to the next video and return it with a better one.
신문지 접착 할시 스티로폼바닥에 무슨약품 쓰셨는지요~~~~~/ 그리고 신문지위에바르는거느 유성페인트인가요???
스티로폼 핑크색 본드는 무엇인가요?
스티로폼본드입니다.철물점에 3000원정도합니다
what is that pink color adhesive? anyone?
It's Styrofoam Bond. be at a nearby tool store. Thank you.
Neat
@@MrKeywave Thanks. I'm gonna build styroFoam kayak someday! I'll be waiting for your new updates.
Is this Kayak heat resistant? Can I use in 45 - 50 degrees weather.
There are some differences depending on the styrofoam used as the base, but as a result, it can be used sufficiently by FRP molding.
hi friend, i'm thinking of using styrofoam in the core instead of this pvc foam. It would be possible?
Wood glue water base 🎉
약품소개도 자막으로 좀 해 주셨으면~~~~~~
Belinya dimana
Toko bangunan
update bro?,
I will upload part 2 and part 3 at the same time. Hold on a minute, please.
dude where's the 2 and 3?, still waiting
😷👍🇧🇷
중간중간 못 매꾼 곳은 우레탄 폼을 쓰시면 될 듯 했는데...
속을 채우는데는 탁월한데 표면에 사용하기에는 일이 더 많이 지더라고요 ^^
참 시간도 몇배가 들고요^^
Yes boat storm hello boat building s
Styrofoam