After multiple unsuccessful tries following the instructions that came with my printer, I found your tutorial. Within minutes, I was able to successfully setup my wireless printer. Thank you! You not only made my day, but restored my confidence in having at least some limited ability to function rather independently in rural America.
but even though i set it up the printer icon is still 'grayed' out in my Device and Printers, and I cannot print, as when I do it says 'printer cannot be found'. When i plug in my USB though the grayed icon lights up again and I can print.. and everything that happened in your video successfully wen through on mine - saying connected etc. please help me and thanks? :(
Believe it or not, your tutorial is still helping people. When I got the MX530 a few years ago I followed the instructions. Like so many have expressed it was a nightmare. Finally, I got it connected to my network. Unexpectedly the printer connection was dropped. I was not looking forward to going through the setup once again. I came across your tutorial. The printer was connected in 2 minutes. It's mindboggling that Canon would not have this method printed on a "Quick Setup" guide. Thank you very, very much. You saved me from a few hours of heavy drinking. 😄
I have been trying to set up this printer until 2:00 a.m. and gave up. Woke up early this morning to try again and after 1 hour of getting frustrated, I find YOUR video and set it up in 3 minutes!!!! You are a life saver. Thank you for your video tutorial.
This tutorial was quick, easy and painless! When I first got my printer, I read the instructions, but for some reason, it seemed to difficult and impossible to connect to the internet, so I gave up. A year later, I thought I'd give it a try again. This was the first video suggested on Google, and followed all the steps and got it all right the first time! Thanks for not taking forever to explain how this works. I like short, to the point results. Thanks again! Keep up the great work!
I have been trying to connect my printer to my network for MONTHS...well it will be two years in February. Following your clear instructions - I have achieved what I thought to be the impossible. Thank you!
Thank you so much! This was the best tutorial I came across, straight to the point and clearly explained and shown. It is still a relevant video after so many years. Please never take down this video!
The ABSOLUTE BEST set of instructions on how to connect Canon printer (Pixma 432) to wi-fi. A step by step guide - both verbally and visionally! Thank you.
BRILLIANT!!! Following instructions that were on the disk that came with the printer = 1 hour (without any luck). Watching this video with no difficulty understanding = 30 seconds. Needless to say YOU ROCK!!!!!
I had not used this printer very much. It is five years old with less than 500 prints. I changed its location in the house and had to reset it. I was about to go buy a new one because I could not get it up and going again. You just saved me a couple hundred bucks. I do need new ink. But, that is a lot less expensive than a new printer. Thank you! Covid 19 brought my work home. Having the printer up and going is a real blessing.
I've tried endlessly for 4 hours to connect this manually and with instructions with no success. Once I found your video everything IMMEDIATELY WORKED!! THANK YOU SO MUCH
Beating my head trying to install a printer for two days. Watched this video and finally learned how to get the numbers I needed. Would have been easier if Canon had made a half sentence mention. But thankfully you did. Thank you. Thank you.
After struggling 3 day trying to connect my printer and going on cannon website for instructions i finally found this video and i was able to connect this printer in 2 minutes thanks a lot!!
Thank you so very much! After wasting 3 days, after we had moved and have new wifi network, with using the CD and the manual with no success , we had our printer going in minutes with your tutorial! Thank you again!
You are my new HERO! I’ve been working with this for several hours now. No where in the directions did it tell me how to put numbers in for my password and you explained that in only seconds! Thank you so much!!!
Time and again I search for your kind and humble approach to this. Complete with work around when it takes too long to connect automatically, which it always will. Legendary and brilliant. Thank you. Subscribed!
I don't know what I would have done had you not explained how to type a number in for the passphrase. Tapping the asterisk twice worked. I already watched the Cannon video and it wasn't as helpful as your video. Thank you!
THANK YOU SO MUCH! I have been trying to reconnect my printer to our wireless network for hours. After watching your video it was done in less than 30 seconds. The online manuals were crap.
I've spent five hours trying to get my new printer to work wireless. At no point does the crappy Canon guide say that the NUMBER keypad is accessed via the star key, and my Billion router uses numbers not letters. Thanks a million for explaining this and for getting me going!
I have used this video several times to get my Canon MX472 connected to wifi. It is the best!!! The instructions that came with the printer are terrible. Thank you so much for making this easy!
After updating Comcast equipment (that required a change of network name and password), the connection between my computer and printer got lost. When many phone calls and search through manuals on how to re-establish the connection failed to yield any results, (and I had to have the stuff printed to meet a deadline!), just as I was on the verge of getting desperate, I stumbled upon your video. May you be blessed for posting it! I mean this! My printer is a bit different from yours, but I got the gist of it and worked my way around the differences until I got it figured out. Wow! The sound of my printer chumming along was music to my ears! Thank you, thank you!
thank you so much. Canon instructions are rubbish. You are very calm (although quite fast!) but I pressed pause, took my time and I now have my printer reconnected with my new wifi hub.
I CAN'T THANK YOU ENOUGH, I had a project due in the next hour and without your video I would have never been able to print it, take pictures and submitted it like I did. THANK YOU!!!!!! Subscribed!
Stunning style to get a easy job done 1 2 3. You made this process clear, easy, and correct. The instruction that came with my printer had me in tears. Canons 4 set up ( how too's) are worthless as are all the other videos I viewed on this subject. Why did I have to come by this video only after hours of futale head numbing, confusing, others is beond me. 1.25Mil viewers are better people because of you. BRAVO.
You are the best! Thank you so much for simple and clear instructions. After hours of frustrations I found your video and got the printer wifi connected in seconds!!!
Thank you!! I'm not a tech-dummie but I gave up trying to set up a wireless connection using the Canon instructions. It took me 5 minutes following yours.
If you're not sure about any of these settings, you can call Canon support 1845-276-9007 ( US & Canada ). That’s the easiest and most general way to get help for your Canon printer.
This is such a helpful video. Connected a new modem and to computer and needed to do the same for printer. He makes it so easy. Worked just fine. Make sure you have your printer network name and password. He walks you through everything. Thank you so much!
ITJungles we have a canon mx472 was working fine wireless everything was good and all of a sudden it stopped working today we turned it on and can't print from our phones we don't have a computer or the usb cable we've been at it since this morning trying to figure out what the hell is wrong with it. I've tried everything and nothing seems to work can you please help us out please!!!
I have an older MX410, and you need to press the Menu button to get to the device setup. I have been trying to set this wifi up for three years and have always become to frustrated and given up. Your tutorial was great! Thank you so much.
Thank you so much! This was so helpful. Especially since my printer didn't come with any instructions for WiFi use. The ***Astrid*** for switching from numbers to letters was very cool! I never would have figured that out on my own. 🤔😁😁😁
i watch this video and got the printer to connect to the wifi but i still have to plug in the usb to my laptop and the printer to print how do i get my printer to print over the wifi without the usb cored
It is likely - unlik your computer or iphone/phone, your laptop is not connected to your wifi - right? In our home we use two signals called 2g and 5g since one is faster... My laptop wasn't working because the printer was connected to our regular use 2g while the laptop was set up for gaming and logged into our 5g signsl. I'm no "techie" but once you log in to your wifi on yoyr laptop, you should have no problems (unless you have an old printer setup as the default printer... You might have better luck using whatever Helpcenter/Wizard available to troubleshoot and connect you to your newer printer.) Best of Luck & Happy New Year!!! 😉👍
THANK YOU VERY MUCH!!---I spent an hour using the canon set up guides- to no avail- it took 3 minutes of your video to get it up and running ----thanks again
Thank you so much !! We got a new router and I was struggling to figure out how to search for the new router . You are a life saver. I struggled for 1 hour and then I found your video and did it less than 5 minutes. .
omg thank you so much, i had to change my wifi network and couldnt for the life of me figure out how to change the printer to the new network, you video was very helpful. Thank you again for such clear instructions, with your video i set up my printer to my new network, no problems.
Dude! You've saved my ass resetting this Canon printer about seven times. Everytime the power goes out it bumps the Wi-Fi connection and I have to reset it...but I forget how. A tremendous thanks to you and the patience you have in explaining in simple language how to connect wirelessly. There are people who know and understand. Then there's you who knows how to instruct and teach getting across effortlessly what they know and understand. Good on you! Keep up the good work.
I am so grateful that you share your knowledge and skills! I have been more than frustrated with the Canon setup manuals... anything they have shared to fix something has led to more frustration! Thank you!
My WiFi password is combined letters with numbers. Your show detailed how to switch from number to letter by changing “1” to “2” in Passphase which helped me to complete set up. You answered my question instead of Canton customer service when I called Canton and asked how to change to letter, I was told Canton MX432 was too old to have their phone service. So I found your show and I thank you so much!
Thank you for this. I recently had to purchase a new Apple Airport and set up a new network. I had lost the instructions for my MX432 and Canon's site was convoluted enough that I couldn't locate a PDF of the instructions to connect the printer to the new network so I was putting it off until I actually needed something printed. A Google search led me here and your instructions worked perfectly. Had things going again faster than it took me to navigate Canon's site.
Ok Dude, you are officially my HOD (Hero of the Day). Side note, printer can also go the WPS setup route, no password bs. Navigate to that in the printer, tells you to hit WPS button on your router, go back to printer and hit [OK], automatically connects (no password)... HOOAHH!
Absolutely clear! Too many such tutorials show a screenshot of a complicated ap, with the narrator zooming a mouse around, saying go here, go there, click this, and there you go. Totally impossible to follow. This is visible, thorough, and at a pace I an absorb. Thank you.
This video was very helpful. I was unable to connect using the cannon direction but the instructions on the video were clear and it worked immediately. Thank you!
Thanks, ITJ. After several previous attempts, your guidance enabled me to get my printer connected on the first try. Very clear and helpful step-by-step instructions.
OMG! You solved my problem I have been trying to deal with ever since my internet service provider forced me to share a different connection. 1,000,000,000 thank yous for making this video. I have the Canon MX430 without CD or cable. Now, I can continue with my graduate studies .... sigh!
Thank you so much! I have two Canon PIXMA printers and they failed me often times over the past few years of use. The chances of having them working is by luck. I read numerous articles and learned to set a static IP for each and to set up a TCP/IP port to print in order to avoid disconnectivity due to router/Wifi problem. But nothing helps me like your video to get the printers CONNECTED to the network. They are just always offline. I "ping" their IP address in the command prompt and can never reach them. Now it works!! Thanks for sharing!!
This was VERY helpful Mr. ITJungles. Without your showing this, I would have been lost and my printer would not have functioned as well. The instructions sent with the printer are crap when it comes to anything other than plugging physical items in.
Oh my gosh, you are a life saver!!! I have had my printer for years and never been able to use the wifi feature until today with your explanation!! 👍👍👍
OMG THANK YOU!!!! My internet provider came and changed oh excuse me (upgraded) my modem and router. I got all of our devices connected and we were doing well until I had to print some information for work and could not. I called my internet provider and they were like "everything on our end is o.k. so you need to contact the company who your printer is with". I was glad that my printer had a USB cable and I was able to print what I needed for work. I total forgot I had to change my lan settings in my printer. You are a genius.
THANK YOU! You saved me 85.00 - how much the computer shop was going to charge me to get my computer set up. It took less than 5 minutes! and I've been trying to figure this out for months!
Thank you, I was 30 seconds away from throwing this printer out the window... thanks to you it is safe on my desk...
I am so glad you have found this video :). Another good printer Saved.
Eddie D .. Lol ..me too ! Darn thing
Thank you. 2:53 though 😂
Eddie D yes!!! 🤭
🤣🤣🤣same way I was feeling I had my printer for 4 years and never set it up
u dont understand the struggle ive been going through... 6 years later and u just blessed me, thank you.
Lol!!
After multiple unsuccessful tries following the instructions that came with my printer, I found your tutorial. Within minutes, I was able to successfully setup my wireless printer. Thank you! You not only made my day, but restored my confidence in having at least some limited ability to function rather independently in rural America.
Mary E. Leary Hi Mary, I am so glad this video is of help.
Mary E. Leary Agreed.... I struggled on CANON site and this tutorial had me on in no time! Thanks!
but even though i set it up the printer icon is still 'grayed' out in my Device and Printers, and I cannot print, as when I do it says 'printer cannot be found'. When i plug in my USB though the grayed icon lights up again and I can print.. and everything that happened in your video successfully wen through on mine - saying connected etc. please help me and thanks? :(
Carpediem06 you have to change your printer setup in your computer from wired to wireless
Mary E. Leary i
Believe it or not, your tutorial is still helping people. When I got the MX530 a few years ago I followed the instructions. Like so many have expressed it was a nightmare. Finally, I got it connected to my network. Unexpectedly the printer connection was dropped. I was not looking forward to going through the setup once again. I came across your tutorial. The printer was connected in 2 minutes. It's mindboggling that Canon would not have this method printed on a "Quick Setup" guide. Thank you very, very much. You saved me from a few hours of heavy drinking. 😄
Do you know how I can align the paper so what I am printer comes out clearly? The black ink lettering is fuzzy. Thank you
5 years or more after you posted this, your STILL helping people😀. Thank you !
I have been trying to set up this printer until 2:00 a.m. and gave up. Woke up early this morning to try again and after 1 hour of getting frustrated, I find YOUR video and set it up in 3 minutes!!!! You are a life saver. Thank you for your video tutorial.
This tutorial was quick, easy and painless! When I first got my printer, I read the instructions, but for some reason, it seemed to difficult and impossible to connect to the internet, so I gave up. A year later, I thought I'd give it a try again. This was the first video suggested on Google, and followed all the steps and got it all right the first time! Thanks for not taking forever to explain how this works. I like short, to the point results. Thanks again! Keep up the great work!
CANON NEEDS TO HIRE YOU TO DO THEIR TUTORIALS!!! 👍 #Canon #HireITjungles
+Tell Meg no you see that would be too smart LOL
canon explanation diagram is poor at best. They need to vastly improve their tech and their paperwork
Because they fucking suck I have been struggling for HOURS!
why do companies make things so complicated...just make one button to do all that shit.
Cause its not cool enough
ong 😭
Lol🤣🤣🤣how I was feeling
A SHIT button!
Lmmfaooooo
I have been trying to connect my printer to my network for MONTHS...well it will be two years in February. Following your clear instructions - I have achieved what I thought to be the impossible. Thank you!
Thank you so much! This was the best tutorial I came across, straight to the point and clearly explained and shown. It is still a relevant video after so many years. Please never take down this video!
The ABSOLUTE BEST set of instructions on how to connect Canon printer (Pixma 432) to wi-fi. A step by step guide - both verbally and visionally! Thank you.
BRILLIANT!!! Following instructions that were on the disk that came with the printer = 1 hour (without any luck). Watching this video with no difficulty understanding = 30 seconds. Needless to say YOU ROCK!!!!!
I had not used this printer very much. It is five years old with less than 500 prints. I changed its location in the house and had to reset it. I was about to go buy a new one because I could not get it up and going again. You just saved me a couple hundred bucks. I do need new ink. But, that is a lot less expensive than a new printer. Thank you! Covid 19 brought my work home. Having the printer up and going is a real blessing.
Thank you very much 😭😭😭
I had my printer since 2016 I didn’t know how to connect to the WiFi ❤️🙏🏻 thank you again
I've tried endlessly for 4 hours to connect this manually and with instructions with no success. Once I found your video everything IMMEDIATELY WORKED!! THANK YOU SO MUCH
Beating my head trying to install a printer for two days. Watched this video and finally learned how to get the numbers I needed. Would have been easier if Canon had made a half sentence mention. But thankfully you did. Thank you. Thank you.
Kelly Harris Another extremely grateful viewer . Thank god for clever buggers eh ? Lol
Believe me or not I bought this printer 7 years ago and I got no clue how do I go about. This video helped me a lot. Thanks mate. 🙏🏻
After struggling 3 day trying to connect my printer and going on cannon website for instructions i finally found this video and i was able to connect this printer in 2 minutes thanks a lot!!
Thank you so very much! After wasting 3 days, after we had moved and have new wifi network, with using the CD and the manual with no success , we had our printer going in minutes with your tutorial! Thank you again!
Thank you so much! I moved after having my printer set up for 5 years and had no clue what to do!
You are my new HERO! I’ve been working with this for several hours now. No where in the directions did it tell me how to put numbers in for my password and you explained that in only seconds! Thank you so much!!!
Thank you so much. I haven't used my printer because I felt it was too confusing to do. You made it so simple.
Time and again I search for your kind and humble approach to this. Complete with work around when it takes too long to connect automatically, which it always will. Legendary and brilliant. Thank you. Subscribed!
I don't know what I would have done had you not explained how to type a number in for the passphrase. Tapping the asterisk twice worked. I already watched the Cannon video and it wasn't as helpful as your video. Thank you!
THANK YOU SO MUCH! I have been trying to reconnect my printer to our wireless network for hours. After watching your video it was done in less than 30 seconds. The online manuals were crap.
I've spent five hours trying to get my new printer to work wireless. At no point does the crappy Canon guide say that the NUMBER keypad is accessed via the star key, and my Billion router uses numbers not letters. Thanks a million for explaining this and for getting me going!
Same! The whole time I was typing it in on the letter pad and had no idea it should have been changed to numbers
Mr.Cheap how many times do you push it to get to numbers
@@onelildee Once or twice, it should change from ABC in top right corner to #
Thank you thank you, I'm 82 and easily followed your instructions, regards from Canada
This was significantly more helpful than the Canon Set-Up guide. Thank you so much!
I have used this video several times to get my Canon MX472 connected to wifi. It is the best!!! The instructions that came with the printer are terrible. Thank you so much for making this easy!
Thank you!!! I have had this printer for YEARS and could never figure it out...even following the User's Guide! :o)
After updating Comcast equipment (that required a change of network name and password), the connection between my computer and printer got lost. When many phone calls and search through manuals on how to re-establish the connection failed to yield any results, (and I had to have the stuff printed to meet a deadline!), just as I was on the verge of getting desperate, I stumbled upon your video. May you be blessed for posting it! I mean this! My printer is a bit different from yours, but I got the gist of it and worked my way around the differences until I got it figured out. Wow! The sound of my printer chumming along was music to my ears! Thank you, thank you!
Thank you so much for showing how to enter numbers for passphrase!! Had no clue it was * button to switch
YOU ARE MY LIFE SAVER!!! You should be the director of the printer of this company! You save me without a minute. Truely appreciate!!
This was fantastic. I spent hours trying to figure it out, this video solved my problem in minutes! :)
thank you so much. Canon instructions are rubbish. You are very calm (although quite fast!) but I pressed pause, took my time and I now have my printer reconnected with my new wifi hub.
Thank you so much! Far more helpful than the Canon website!
I CAN'T THANK YOU ENOUGH, I had a project due in the next hour and without your video I would have never been able to print it, take pictures and submitted it like I did. THANK YOU!!!!!! Subscribed!
THANK YOU!!! OH MY GOSH I have had the hardest time trying to figure this out. I'm half tempted to get up and go do this now.. it's 2 am.
Stunning style to get a easy job done 1 2 3. You made this process clear, easy, and correct. The instruction that came with my printer had me in tears. Canons 4 set up ( how too's) are worthless as are all the other videos I viewed on this subject. Why did I have to come by this video only after hours of futale head numbing, confusing, others is beond me. 1.25Mil viewers are better people because of you. BRAVO.
Thank you this video helped me a lot.
You are the best! Thank you so much for simple and clear instructions. After hours of frustrations I found your video and got the printer wifi connected in seconds!!!
I am glad you got it to work. Have a great day. 👍
My printer won’t move on the next step which is the password, it just tries to connect. Any suggestions for that?
Thank you!! I'm not a tech-dummie but I gave up trying to set up a wireless connection using the Canon instructions. It took me 5 minutes following yours.
If you're not sure about any of these settings, you can call Canon support 1845-276-9007 ( US & Canada ). That’s the easiest and most general way to get help for your Canon printer.
It was driving me crazy trying to figure out how to change from numbers to letters. Thanks so much for posting. Your a blessing.
You just saved me the biggest headache thank you thank you!!
This is such a helpful video. Connected a new modem and to computer and needed to do the same for printer. He makes it so easy. Worked just fine. Make sure you have your printer network name and password. He walks you through everything. Thank you so much!
Excellent instructional video!
Ranger42 Thanks for the feedback.
ITJungles we have a canon mx472 was working fine wireless everything was good and all of a sudden it stopped working today we turned it on and can't print from our phones we don't have a computer or the usb cable we've been at it since this morning trying to figure out what the hell is wrong with it. I've tried everything and nothing seems to work can you please help us out please!!!
You've made the instructions so clear and the job so simple. I don't know why Canon can't do this. You're the best!
You’re a legend
I agree! Saved my tush.
I have an older MX410, and you need to press the Menu button to get to the device setup. I have been trying to set this wifi up for three years and have always become to frustrated and given up. Your tutorial was great! Thank you so much.
Thank you so much! This was so helpful. Especially since my printer didn't come with any instructions for WiFi use. The ***Astrid*** for switching from numbers to letters was very cool! I never would have figured that out on my own. 🤔😁😁😁
Ikr
Thank you! I couldn't figure out how to print the CAPS and numbers until I watched this. You are awesome!
That was very good well done
Easiest and best instructions that actually worked! 15 minutes, up and going. Awesome
Thank You! this was exactly what I was looking for :)
it took me less than 2 mins to connect my canon printer setup to a Wi-Fi network after watching that video.Helpful
Thaaaaaaaaaaaaaaaaaaaaanks m8 you saved my life
This is a GREAT video! For the first time in my life, I've got my printer connected to my WiFi. THANK YOU!!!
i watch this video and got the printer to connect to the wifi but i still have to plug in the usb to my laptop and the printer to print how do i get my printer to print over the wifi without the usb cored
You have to configure on the pc.
how do i do that
It is likely - unlik your computer or iphone/phone, your laptop is not connected to your wifi - right? In our home we use two signals called 2g and 5g since one is faster... My laptop wasn't working because the printer was connected to our regular use 2g while the laptop was set up for gaming and logged into our 5g signsl. I'm no "techie" but once you log in to your wifi on yoyr laptop, you should have no problems (unless you have an old printer setup as the default printer... You might have better luck using whatever Helpcenter/Wizard available to troubleshoot and connect you to your newer printer.) Best of Luck & Happy New Year!!! 😉👍
+ITJungles How to configure it?
Megan Torrie my laptop is connected to the wifi and i dont even though if we have 2g and 5g
THANK YOU VERY MUCH!!---I spent an hour using the canon set up guides- to no avail- it took 3 minutes of your video to get it up and running ----thanks again
Thank you so much !! We got a new router and I was struggling to figure out how to search for the new router . You are a life saver. I struggled for 1 hour and then I found your video and did it less than 5 minutes. .
omg thank you so much, i had to change my wifi network and couldnt for the life of me figure out how to change the printer to the new network, you video was very helpful. Thank you again for such clear instructions, with your video i set up my printer to my new network, no problems.
This was literally So helpful! I went almost 2 years without my printer and you helped me in 30 seconds! Thanks a ton!!!
its been 10 years since you posted this and its been a MIRACLE!!!! who knew printer could annoy the crap out of you😂
Thank you!!! God bless you 7 years after you uploaded this video.
Dude! You've saved my ass resetting this Canon printer about seven times. Everytime the power goes out it bumps the Wi-Fi connection and I have to reset it...but I forget how. A tremendous thanks to you and the patience you have in explaining in simple language how to connect wirelessly. There are people who know and understand. Then there's you who knows how to instruct and teach getting across effortlessly what they know and understand. Good on you! Keep up the good work.
This was very helpful. The directions and lack of directions that came with the printer made it very hard to understand how to set it up. Thank you!
I am so grateful that you share your knowledge and skills! I have been more than frustrated with the Canon setup manuals... anything they have shared to fix something has led to more frustration! Thank you!
Thanks. Always appreciate smart users doing what the negligent manufacturers always fail to provide!
You single handedly saved my science project i love you so much
I cannot thank you enough for this video, so detailed, I use it every few years because I always forget how my ancient printer works
Still helps in 2020. You dont know how much you helped me today. Thank you so much!!!
Thank you always for your help! Every time I'm disconnected, this video is the only instruction I return to. VERY HELPFUL!
My WiFi password is combined letters with numbers. Your show detailed how to switch from number to letter by changing “1” to “2” in Passphase which helped me to complete set up. You answered my question instead of Canton customer service when I called Canton and asked how to change to letter, I was told Canton MX432 was too old to have their phone service. So I found your show and I thank you so much!
Thank you for this. I recently had to purchase a new Apple Airport and set up a new network. I had lost the instructions for my MX432 and Canon's site was convoluted enough that I couldn't locate a PDF of the instructions to connect the printer to the new network so I was putting it off until I actually needed something printed. A Google search led me here and your instructions worked perfectly. Had things going again faster than it took me to navigate Canon's site.
Ok Dude, you are officially my HOD (Hero of the Day). Side note, printer can also go the WPS setup route, no password bs. Navigate to that in the printer, tells you to hit WPS button on your router, go back to printer and hit [OK], automatically connects (no password)... HOOAHH!
Years later and this is still useful. 👍👍👍
Thanks a million.
Mine was different but thank you so much because without you I wouldn't have known how to do this i appreciate people like you, you're a good person.
Absolutely clear! Too many such tutorials show a screenshot of a complicated ap, with the narrator zooming a mouse around, saying go here, go there, click this, and there you go. Totally impossible to follow. This is visible, thorough, and at a pace I an absorb. Thank you.
This video was very helpful. I was unable to connect using the cannon direction but the instructions on the video were clear and it worked immediately. Thank you!
I've used this demo many times. It's the BEST one. THANK YOU!
Thank heavens for people like you !! And you tube !! I was completely stuck ... Now I have the know how . Bless you
Thank you!!!!! I wasted so much time trying to get this hooked up to my new router, until I found your post. Done in no time!
Thank you so much. No other video I found had the way to get the passcode into the printer. Yours was the only one. Thank you!
Thank you! We just replaced the router and didn't think about the fact we would have to reconnect the printer. The video was very helpful.
This video stopped me from throwing my printer out. Thank GOD for you!!! You were way more helpful than the dog on manual.
This gentleman's explanation far exceeds that of the Tutorials made available by Canon 10 out of 10
Thanks, ITJ. After several previous attempts, your guidance enabled me to get my printer connected on the first try. Very clear and helpful step-by-step instructions.
OMG! You solved my problem I have been trying to deal with ever since my internet service provider forced me to share a different connection. 1,000,000,000 thank yous for making this video. I have the Canon MX430 without CD or cable. Now, I can continue with my graduate studies .... sigh!
Thanks so much. For some reason I have to reconnect every few weeks. Your video always helps.
Thank you so much! I have two Canon PIXMA printers and they failed me often times over the past few years of use. The chances of having them working is by luck. I read numerous articles and learned to set a static IP for each and to set up a TCP/IP port to print in order to avoid disconnectivity due to router/Wifi problem. But nothing helps me like your video to get the printers CONNECTED to the network. They are just always offline. I "ping" their IP address in the command prompt and can never reach them. Now it works!! Thanks for sharing!!
Thank you! I have had this printer for 2 years and thanks to your tutorial I was finally able to get it set up for wireless!
This was VERY helpful Mr. ITJungles. Without your showing this, I would have been lost and my printer would not have functioned as well. The instructions sent with the printer are crap when it comes to anything other than plugging physical items in.
Thank you for your help! You saved me from demolishing my printer and having a nervous breakdown!
Oh my gosh, you are a life saver!!! I have had my printer for years and never been able to use the wifi feature until today with your explanation!! 👍👍👍
OMG THANK YOU!!!! My internet provider came and changed oh excuse me (upgraded) my modem and router. I got all of our devices connected and we were doing well until I had to print some information for work and could not. I called my internet provider and they were like "everything on our end is o.k. so you need to contact the company who your printer is with". I was glad that my printer had a USB cable and I was able to print what I needed for work. I total forgot I had to change my lan settings in my printer. You are a genius.
THANK YOU! You saved me 85.00 - how much the computer shop was going to charge me to get my computer set up. It took less than 5 minutes! and I've been trying to figure this out for months!
Thanks for the help. Glad that your changing your wifi password, over 2 million people watched this video and know the password now. 🙂