Thanks for this. I should have watched more carefully as there are two pitfalls and I fell into both. Firstly, it's easy to make holes in the wrong edge of the legs. Secondly, there are two lengths of screw: short for the shelf and long for the leg. Get it wrong and you'll split the surface of the shelf.
It's always better to watch the tutorial video AND refer to the manual. Apart from the ID numbers, the screws are also drawn to scale on the manual. You can put the screws on top of the drawing and they will be actual size.
5:42 The LACK coffee table appears to have a newer version where there is a bigger hole at the bottom of the table leg. This is for the plastic cushion.
Thanks for this. I should have watched more carefully as there are two pitfalls and I fell into both. Firstly, it's easy to make holes in the wrong edge of the legs. Secondly, there are two lengths of screw: short for the shelf and long for the leg. Get it wrong and you'll split the surface of the shelf.
You're welcome.. thanks for watching and good luck next time
It's always better to watch the tutorial video AND refer to the manual.
Apart from the ID numbers, the screws are also drawn to scale on the manual. You can put the screws on top of the drawing and they will be actual size.
Table is strong enough?
nice production, helpful closeups. Thank you.
You're welcome .. thanks for watching
Well explained. Very useful 👍
Thank you very much Sir
You're welcome, thanks for watching 👍
I thought I had to screw the whole screw in with my hand 😂 thanks for helping 🙏
you're very welcome 👍 thanks for watching 📺 , please don't forget to subscribe 🙏
It was very helpful, thank you so much
You're very welcome 👍 thanks for watching 🙏
Thanks for sharing.very helpful
You're welcome 👍 thanks for watching 🙏
Thank you very much!
You're welcome, thanks for watching 👍
❤
Nice work.. especially zooming on initial steps 👌
thanks for the help
You're welcome.. thanks for watching. Please don't forget to subscribe 👍
Thank you very much for sharing this
you're very welcome 👍 thanks for watching 🤝 please don't forget to subscribe 🙏
👍👍👍👍👍
Thank you so much!
you're very welcome 🤝 thanks for watching 👍 please don't forget to subscribe 🙏
Too many ads, duhhh
What screwdriver did you use for making the holes on the legs?
just something sharp. you can use a big screw
Thanks
you're very welcome 👍 thanks for watching 🙏 please don't forget to subscribe 🙏
Merci
Avec plaisir 👍
Are the holes already on the table? Or do I have to drill it?
The holes in 1:55 already done by IKEA . In 5:36 , you have to do it just with a screwdriver 🪛.
Good luck
@@th3blogger thanks
5:42 The LACK coffee table appears to have a newer version where there is a bigger hole at the bottom of the table leg. This is for the plastic cushion.
👎
la calidad del material con el que esta fabricada no es bueno, no me gusta
I agree this table is cheaply made compared to other IKEA furniture, but it is not the fault of this video. No need for thumbdown.
Really an excellent video thank you so much
you're very welcome 🤝 thanks for watching 👍 please don't forget to subscribe 🙏