Thank you so much for posting this! In the process of installing a 155bbk race kit from Chris @rcscooters. So pumped! I've done 70cc on my two stroke which is a good time but this one, well, they will definitely know im there with the full carbon yoshimura on the back end! Your videos make it so much easier to visualize the process when done correctly!
No jet, this was for a Fuel Injected motor. For carb motors, it would depend on the size of the carb and the type of exhaust installed. Thank you for watching.
Hey bro what sup do you know what final gear can i use for my 05 yamaha zuma 70cc yw50 i want higher speed? Do i have to go lower teeth lower gear to get higher speed? 13-44 or 15-50?
Thank you so much for posting this! In the process of installing a 155bbk race kit from Chris @rcscooters. So pumped! I've done 70cc on my two stroke which is a good time but this one, well, they will definitely know im there with the full carbon yoshimura on the back end! Your videos make it so much easier to visualize the process when done correctly!
No jet, this was for a Fuel Injected motor. For carb motors, it would depend on the size of the carb and the type of exhaust installed. Thank you for watching.
I have only seen the K&S controller in a few photo graphs. Ask the vendor for the instructions, while I look on my end. I have never use one.
Me gustaria ver como va la posicion de los tiemposy la calibrada de las punteras
Hardest thing on a big bore kit for me is installing the 60 mm stroker crank The valves N valve Springs roller rockers and that's my biggest issue!
Hey bro what sup do you know what final gear can i use for my 05 yamaha zuma 70cc yw50 i want higher speed? Do i have to go lower teeth lower gear to get higher speed? 13-44 or 15-50?
No hondabond needed for the gaskets?
What main jet did you fit for the BBK upgrade?
I want to know how to install the timing chain onto the gear you didn't show that part
Service book clearly shows how and once you get hands on the motor it all makes sense.
My friend I have a cygnus x speed 110 I have a problem when walking leave the skater turns off to know where the problem
I want to send you a video to see the problem
I want your Facebook
i have a 125cc yamaha cygnus flame 2004 model i am only doing 90 mph am looking fowerd to do 110 or 125 can i have some upgrade plise
Uhhh ehhh, I'm not a Zuma 50 guy, post the same question to the Zuma 50 section on Zumaforums,net
I have everything to make my Zuma 125 2013 A 205cc all the parts And nobody to help me install it I live in Virginia Beach virginia . What do I do??
Download the service manual, then watch my videos, ask a lot of questions in the forums. I did all of this from reading the Yamaha book.
Ħŧŧƥ\\mmm,ksmotor,com,tw/ You'll figure it out