Great video, really, really helpful! Very well and clearly explained, good video showing exactly how to refill the cartridges. Thanks and keep up the good work
If you would like to know how our professional Qu-Fill refill tool can be used, take a look at this video. It shows the refill of the HP 950, 951 cartridges. (LW)
Thank you very much for this fantastic feedback! HP 960 is the code of the HP 950 for India region. So refilling HP 960 XL is the same as refilling HP 950 XL. The ink volume for the XL versions is bigger than the ampount of refill ink for the standard yield versions.
Hola. Desde España. Me encanta de como has pensado este adptador. Es el mas simple, perro el mas profesional de que he visto en internet. Me interesa si puedo hacer un pedido de este adaptador de aquy de España. Me simplifica mucho el trabajo. Muchas gracias!
Usted puede comprar el adaptador aquí: www.octopus-office.de/en/shop/details/c/tools-equipment-for-ink-refill/p/qu-fillTM-profi-fuer-kugelventil-refill-hpR-932-950-970-aus-messing/ Disculpen nuestra mala español.
When I was refilling the black cartridge I forgot to put the tape ,while printing I found contamination on yellow printouts when I used another black cartridge everything is normal so I have one refilled black cartridge with a problem how to fix it if I sucked all ink and refilled it may that fix it.or any other solutions please to fix this cartridge ,how to clean these vent air tubes if have residues .
Thanks for Your quesstion. We assume fromm Your description that there is too much ink inside the refilled cartridge or the pressure inside the cartridge might be wrong. So extracting the ink from that cartridge and taking care of reoving the air from the air bags, then refilling it properly again can fix the cartridge´s problem.
According to these customers they are working with the leap frogging method. That means they have a couple of original cartridge sets available and use them rotationally.
I've basically been refilling these using the same port you do but by forcing the ink in. I'll have to try this way and compare, because when I refill the cartridge always bleeds through the print head forcing me to print several pages of that color and run a print head clean operation until it starts printing normally.
+Chipperowski Thank you very much for sharing Your experience with us. Forcing the ink in creates a positive pressure inside the cartridge, assuming that You do not release that pressure. This pressure pushes the ink through the print head and the result is as You describe it.
There are no openings that lead from the ink tank to the outside directly. Therefore pressing in the ink into the ink tank compresses the air in there, without releasing the air to the outside and without leading that air out of the cartridge. The air ports on the cartridge´s front and side lead into little plastic bags inside the cartridge, but they are not connected to the ink tank section.
Thanks for contributing Your experience. The nagative pressure at the end releases the pressure from inside the cartridge. Therefore no more ink is pushed through the print head by that excess pressure.
Hello, 950 is verry simillar to new HP 711 cartridges that are used for large printers,designjets T120 and T520.Can you tell me if the refill procedure is the same? Thanks!
Thank You very much for Your positive feedback to our tutorial. We are sorry to say that we have no reasonable way in meaning of costs for shipment to get the tool to Indian customers :(
I know that this video was some time ago but if you could let me know where I can buy this QU-Fill tool in Canada these days January 2024 Thank you. This method shows me that you are the one that knows that if you remove air it will be replaced by the ink
Thanks for reaching out to us about the refill tool. Yes, You are right this method for refilling HP 950/951 and similar cartridges has aged a bit already 🙂 At the moment we do not have a partner in Canada for selling or distributing our refill tool solutions. Please send an email with Your postal address to mail@octopus-office.de (final receiver should be Matthias). We figure something out to get something going to You...
Thanks for contacting us about the refill tool. You can purchase from our online shop to US. www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-953-970-980-and-primera-spring-valve-cartridges-brass
Hello Carlos, thanks for Your question. From our customers we know the brass refill tip also works for HP712 cartridges - we have not tested this by ourselves to be honest.
Please check the following link to get to our instruction for installing the alternative chip on an original cartridge: www.octopus-office.de/info/en/ink-refill-instructions/ink-refill-instructions-for-hp/hp-950-hp-951-cartridges-with-chip/replacement-chips-for-hp-950-hp-951/
Hello Darren, thanks for Your question. When You are working with alternative chips - we recommend to use them until the printer does not accept them for further print jobs. This way You make the most use of the costs for each chip. Your displayed ink level information may not be absolutely correct - but as long as You take care of that there is sufficient ink available inside the cartridge - You will have no problem.
Hello, can you please tell if the refill method works using depleted original HP cartridges with original chips (NON Setup version) and alternating them, e.g. replacing the empty cartridge with another refilled one ?
Thank You very much for Your question. We assume You refer to HP 950, 951 cartridges. Please check the following link that explains the situation of the serial numbers of depleted original HP cartridges: www.octopus-office.de/en/info/ink-refill-instructions/ink-refill-instructions-for-hp/hp-950-hp-951-cartridges-with-chip/managing-hp-950-hp-951-serial-numbers/ The method to work with refilled cartridges wthout replacing the chip is the so called leap frog method. For HP printers using 950, 951 cartridges You need to have 4 cartridges of each color available. Mark them with numbers and use them in rotation.
@@ricardomierz8467 Hello Ricardo, please try the following link. You should reach the overview page what refill tutorials we have available for HP950 HP951 cartridges: www.octopus-office.de/info/en/ink-refill-instructions/ink-refill-instructions-for-hp/hp-950-hp-951-cartridges-with-chip/
Gracias por la petición. Hay un vendedor en los Estados Unidos. Eso está al menos un poco más cerca de lo que estamos en Alemania. www.rjettek.com/5110-qu-fill-professional-tool-for-filling-hp-932-933-950-951-970-971-cartridges/
We only know about the HP 950 XL cartridge as the biggest cartridge. The 950 XL`s cartridge body is bigger physically as the standard yield cartridge. The 950 Xl refill ink amount is 53 ml.
Hello John, the QU-Fill works for HP 932 and HP 933 too. The instruction in the link below uses a tool similar to the QU-Fill professional: www.octopus-office.de/en/info/ink-refill-instructions/ink-refill-instructions-for-hp/refill-instructions-for-cartridges-hp-932-hp-933/refill-instructions-for-hp-932-hp-933-cartridges-with-qu-filltm-syringe-caps/ Regards The Octopus Team
HP 46 carridges are a totally different story. They cartridges with an integrated print head. You can refill them by using the air ports in the cartridge´s upper lid. These aor ports are usually hidden beneath the original HP label.
Thank You very much for Your feedback! You can get the refill tool from OCTOPUS® www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-970-spring-valve-cartridges-brass
+Invest In Gold & Silver Thanks for the positive feedback - a bit of practive and You are able to fill these cartridges with spring valve clean and easy!
Hello Tom, we sell basically everything You need for refilling HP950 and HP951. The ink quantity depends on the type of cartridge that You are refilling. Standard version HP 950 Black 23 ml / HP 951 CMY 9 ml XL version HP 950 Black XL 53 ml / HP 951 CMYXL 17 ml
The standard yield HP 951 cartridges take 9 ml of refill ink. We have a video about the ink quantities: ua-cam.com/video/srSRfWUYAsA/v-deo.html Inks You can buy here: www.octopus-office.de/shop/en/printer-ink/printer-ink-hp/hp-940-942/419/refill-ink-kit-for-hp-932-933-940-950-951-four-colours Tool can be bought here: www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-970-spring-valve-cartridges-brass Yes we ship to USA taxfree.
Wenn die Patronen mit diesem System aufgefüllt wurden, ist man danach direkt in der Lage, zu drucken?.. oder muss man einen zusätzlichen Chip erwerben? Zeigt der Drucker, die Patronen nach dem Auffüllen als befüllt oder als leer an? Ist man in der Lage, den Druck mit "leeren" (aber aufgefüllten) Patronen durchzuführen?
+Sherlock Holmer ua-cam.com/video/7gpjxxmjuzo/v-deo.html Wenn Sie den Chip nicht tauschen möchten, benötigen Sie 4 originale Patronensätze, welche Sie rotierend, nacheinander in Ihrem Drucker verwenden. Ohne Tausch des Chip wird eine nachgefüllte Patrone als leer angezeigt.
+OctopusConcept Vielen Dank für die schnelle Antwort! meinen Sie damit 2 Patronensätze a 4 Patronen, sodass man zwischen den Patronen einmal rotieren kann? Lässt man bei dem rotieren, die jeweils im Drucker vorliegende Patronen vollständig leer werden oder muss vor dem vollständigen Entleeren gewechselt werden? Wenn die Patronen nach dem Auffüllen und Rotieren als leer angezeigt werden, ist man danach noch in der Lage zu drucken? Mit freundlichen Grüßen Sherlock
+Sherlock Holmer Nein, leider meinen wir tatsächlich 4 komplette Sätze Originalpatronen. Der Drucker merkt sich 3 Patronenseriennummern pro Farbe. Erst nach Verwendung der vierten Patronen "vergisst" der Drucker die Seriennummer der ersten Patronen und Sie können diese dann wiederbefüllt ohne Tausch des Chips in Ihrem Drucker zum drucken verwenden.
Hello John, the tool is available here: www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-953-970-980-spring-valve-cartridges-brass
Hello Sr. changing the ship is always needed when refilling ? In my specific case, I have 2 sets of OEM cardbridges, one just finishing now and one brand new, switching between them (so know I will be using the knew one and once that one is done refilling the old one refilled ? will that make them work without changing cheaps or its mandatory ? Thanks in advance, really good looking product and looking forward to put my hands on him. The ink is top quality ?
Hello, thanks for the question. If You want to refill the originals without changing the chip You need to have 4 sets of original cartridges. The following link gives You an explanation why: www.octopus-office.de/info/en/ink-refill-instructions/ink-refill-instructions-for-hp/hp-950-hp-951-cartridges-with-chip/managing-hp-950-hp-951-serial-numbers/
Damn... So even buying the x8 Cheaps pack, I will have enough just for 2 (4x2) refills, before having to buy new chips, right ? Once they're on, you cannot just unstick them from the cardbridge and use the initial card bridge serial? Do the ships works fine on HP 8600 ? They recognize them as original or adaptable ? Otherwise the other solution is buy another set ? It will work with adaptables ones ? Thank you for your answer, I will probably be buying your product for the tip and nice system. UP. Looking at your web site, it says the chips are usable for 1000 prints each ? Thats correct ?
You can give it a try to pry the alternative chips off after You have used them for printing and go back to the original chip. If the original is still intact it could work. The chips are reliable. For legal reasons the cartridges with such a chip on are recognized by the printer as non-original.
On you website the declared amount of inch for HP 950 XL Black is 53 ml, while on your video demonstration is 86 ml. Can you please tell which is the correct amount ?
The right amount of ink for HP 950 XL is 53 ml. Thank You very much for pointing to that fact. The suggested amount in our video is based on an outdated recommendation by the manufacturer of the alternative chips. We found that overfilling may have a negative effect on the printing result. So we reduced the filling amount to 53 ml which is equal to the original ink amount.
+OctopusConcept does the pressure inside the air bladder controlled by th printer or it's just a connection to atmospheric pressure cuz some Chinese refillable cartridges have those air openings in other areas not like the genuine one. Another question, how the auto clean printhead works? is it related to cartridge by a way or another or it is a separate mechanism.
The air port on the front of the cartridge facing towards trhe printer is used by the printer for checking the ink level inside the cartridge. The air ports on the sides of the cartridge help to use the full amount of ink from the cartridge. We know about the alternative cartridges from China or somewhere else - we really had bad experiences with them. They have direct opening from the outside to the ink chamber - leaking was not to avoid at all. I am not sure what You refer to by mentioning the auto clean print head.
Usted puede comprar el adaptador aquí: www.octopus-office.de/en/shop/details/c/tools-equipment-for-ink-refill/p/qu-fillTM-profi-fuer-kugelventil-refill-hpR-932-950-970-aus-messing/ Usted no encuentra su país al hacer el pedido con nosotros? www.octopus-office.de/en/info/questions-answers/information-about-order/your-country-is-not-listed-in-our-selection/ Disculpen nuestra mala español.
Hello! The air bag inside the cartridge is important for cleaning. This is why I have a question - is this air bag one-way or not? If you insert ink into the ink channel, does the exact volume of air leave airbag through the holes - or it stays? Because when the cartridge is refilled, and the air in the bag stays same, printer can not clean printhead by pushing air in that cavity anymore, hence one will need to manually clean the printhead from time to time. Thank you!
Majou Nexian Hello, thank You very much for sharing Your expertise with us. According to our experience and knowledge the plastic bags inside the cartridge are involved in the management system of the the ink level. In the original condition these bags are free of air. Later on, when ink has been consumed by printing the printer presses air into thesea bags. From the resistance that is necessary to get air into the bag the ink level management system can calculate how much ink is actually left inside the cartridge. Based on that we recommend to make the bags as much as possible free of air by extracting the air with a syringe out of the air port carefully.
***** Thanks a lot! But how do you get air out with this refilling method? What confuses me is that you put a tape on air openings and try to reverse-push the air inside. The bag is full at this moment, so only little ink can come in. One can only have full bag and empty ink, or full ink and empty bag. And if one lets air in ink segment, then its not very smart either - because this will still leave a bit of air inside. Which may travel in the printhead at the end. I found a much more interesting approach yesterday that I would like you to have a look. It still requires your tool (or a like), but the way is better, as airbag is completely depleted in the process: /watch?v=lHyiv1Y0UhU PS. We already "met" with air compressor of my 8600 :) as I were going to modify the printer with rest ink bottle modification - as I do with photosmart. I was really puzzled at first, but then I consider this printer to be extremely reliably built. Still, it would be cool if they would made waste ink box removable from outside (like Epson), so people don't get all the waste ink all over the printer when transporting. Well, better this than ink counter...
Majou Nexian We first extract the air out of the bags by pulling it out of the air port by using a syringe. After that we start taping the openings. Sorry, we did not make that 100% clear enough. Bag is air free. air port is closed- if You now create negative pressure inside the ink compartement, no new air can enter the bag through the air port.
***** when you remove the air from the bag, do we need worry about any air going back in after the syringe is removed ? or is it best to extract air and leave the syringe while we tape off the holes? or is there no worry at all...
Hello, actually one refill tool is enough to refill all colors - just clean it by rinsing it with water when switching to a new color. You can buy the tool here: www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-970-spring-valve-cartridges-brass
the technique is excellent but... the price here in the US which is $104 i'd rather just buy the oem brand which are $22 US dollars for all the inks. so my question is.... how many times can you refill using this refill tool?
Hello Riko, thanks for Your question. The number of possible refills using the set that is linked in the video description is limited by the amount of chips on this set. There are two new alternative chips for each cartridge included. So You can refill each cartridge two times . So the price for the OEM cartrifges would be arround 200 USD.
Hello John, Thank You very much for Your question about the delivery to United States. Either You send us an email with Your wanted products and delivery address to mail@octopus-office.de and we will reply with Your individual offer or second option We forward Your request to our reseller in US. For the second option we also require Your email address.
I need a little help. I have this 8600 plus printer and lately i refilled the 950 and 952 xl cartridges but since then, they are spilling inks profusely especially black and without using, my cartridges are almost empty without use. So i opened this side and front cover to check the ink spill box and i found lumps and lumps of black grease like ink there. What can be the reason and how can i set it right?
Hello Aumar, thank Ýou very much for the question. Did You use our tool and method to refill Your cartridges? Did You refill original HP 950 XL and 951 XL cartridges?
@@octopusoffice no dear i didnt since i dnt have it. I live in indian occupied Kashmir and dnt know how to get it. I gave my cartridges to a refilling shop who seemed to be confident of what he does though i didnt see him refilling. He confirmed that he did apply negative pressure first.
Hello Aumar, thanks for Your explanation. The information about the negative pressure is important. One reason for a leaking HP950 HP951 can be that the cartridge is pressurized - then the ink is pushed out when the cartridge is set into the printer. When the refiller did the job right the refilled cartridge should not be pressurized. Another possible cause for the leaking could be that the rubber seal in the ink port is damaged. If the refiller has used a tool that inflict some damage to this seal the cartridge can be leaking through the print head into to waste ink pad without beeing used for printing.
When You have the newly refilled cartridge place it in front of You the ink port pointing upwards. Then open the ball valve, that closes the ink port, by pressing a thin screw driver into the ink port carefully. through the open valve the postive pressure should be released and the pressure inside the cartridge should be neutral.
Hello Marlene - thanks for Your question. The chip is a topic for itsself. Either You change the chip after each refilling or You have a couple of empty original cartridges available then You can use them rotationally. The printer stores 3 serial numbers - when installing the 4th cartridge the printer "forgets" the first serial number - then You can use this first cartridge refilled inside the printer for printing BUT You will not have a displayed ink level. Please check our instruction on how to change the chip: www.octopus-office.de/info/en/ink-refill-instructions/ink-refill-instructions-for-hp/hp-950-hp-951-cartridges-with-chip/replacement-chips-for-hp-950-hp-951/
Hello Emad, thanks for Your question. The HP GT53 original ink is for the HP Smart Tank 515 printer, right? We cannot recommend using this ink for HP950 cartridges - we have not tested the HP GT53 ink but we assume the the print head characteristics are different from each other.
We assume that this refill method works for HP 953 too, but we have not tested it as the refill inks are still under development (status Oct 7th 2016).
Yes, we ship to Mexico. Check out our shop: www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-970-spring-valve-cartridges-brass
HI i have 2 questions -HP 7110 use pigment ink and 7500 use dey ink which one you prefer - what you will do with the chip on the cartridge when the printer recognize the you refill the cartridge
Mohammed Duqmaq Thank You very much for Your question. The HP Officejet 7110 works with HP932 and HP933 cartridges. Each cartridge is filled with prigmented ink. So for refilling You should also go for pigmented refill inks. The print head in these printer models is adjusted to this kind of ink. The HP Officejet 7500 works with HP920 cartridges. The black HP920 cartridge is also working with pigmented ink - so please go for pigmented refill ink suitable for this cartridge. The HP920 cyan, magenta and yellow are dye based inks, for the sake of Your print head You should use such inks for the colors cyan, magenta and yellow in HP920 cartridges. This has a positive impact on the life span of Your printer´s print head. There is no chip resetter available for both printers. But there are alternative chips that You can use to replace the empty old chip. Then You have a full working cartridge again after refilling.
***** Thank you very much for this value information, i have problem i what to share with you, after i show your video man times i bought hp 7110 i used the setup cartridges it was OK i now some stores i bought form him ciss system but i dont know what kind of ink in it any way i install the ciss the printer gave me that the ink is not original and start on before the test page it gave me error with the cyan color and no way to print i bought another original cartridge the same error still i watched too many videos to fix this problem no way, one last thing how we know the difference between dey ink and pigment ink, ooh some thing else i found the ciss filled in wrong way the but black in magenta and magenta in black Yalow in cyan and cyan yalow in cyan it was miss i change it the problem is the same thank you very much
Mohammed Duqmaq You say that You receive an error message. We need to know the exact error message or code that You receive from Your printer to be able to provide You some guidance to solve Your problem.
Thanks for Your question. Actually there is a chip on these cartridges on the outide. This chip has a serial number on it . This number identifies the cartridge towards the printer and the printer memorizes this number. As long as the printer knows this number and thinks that this cartridge is empty it refuses to print with this refilled cartridge. You have to make the printer to forget about the serial number of that cartridge. Please check the explanation to this topic on our webpage: www.octopus-office.de/info/en/ink-refill-instructions/ink-refill-instructions-for-hp/hp-950-hp-951-cartridges-with-chip/managing-hp-950-hp-951-serial-numbers/
Thank You very much for contacting us about the refill tool. Please send us an email to mail@octopus-office.de containing Your delivery address in Colombia. Based on that we can make You an individual offer.
I followed the exact steps and refilled 950XL black cartridge. When I inserted to my HP Officejet Pro 8610 printer, it keeps on giving Error: Ink cartridge depleted. Depleted cartridge must be replaced. I have tried re-inserting the cartridge and even restarting, it still keeps on giving me this error. I don't know what to do.
Hello, thanks for the question. Please check the following link. It is a description about how to handle the serial numbers of HP 950 HP 951 cartridges. www.octopus-office.de/info/en/ink-refill-instructions/ink-refill-instructions-for-hp/hp-950-hp-951-cartridges-with-chip/managing-hp-950-hp-951-serial-numbers/
Ye kabhi riffil nhi hoga ye dikha rha hai riffil karke lekin printer mein support nhi karta mai hp 8610 lekar bahut pareshan hua maine 15500 ki hp 8610 printer liya tha uska cortidge change karte karte pareshan ho gya aur 4000 mein sale kar diya jise sale kiya usko pta nhi tha ki riffil nhi hota nhi to use koi nhi leta.
Hello Guillermo, thank You for contacting us. The refill tool is available at: www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-953-970-980-spring-valve-cartridges-brass?sPartner=UA-cam001 In case You are writig from US - You can also purchase from: www.rjettek.com/5110-qu-fill-professional-tool-for-filling-hp-932-933-950-951-970-971-cartridges/
This method of bringing in the refill ink into the cartridge also works for HP 955 too. Make sure not to fill more than the original amount of ink. Overfilling disturbes the physics of the cartridge.
Dear Jonathan Ramos, thank You very much for Your question. You can buy the tool at www.octopus-office.de/en/shop/details/c/tools-equipment-for-ink-refill/p/qu-fillTM-profi-fuer-kugelventil-refill-hpR-932-950-970-aus-messing/ directly. Our online order process You pay German VAT in the first step - we refund this tax back to Your creditr card or PayPal account. Please send further questions to mail@octopus-office.de Best regards The Octopus Team
You can order it from OCTOPUS® directly: www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-970-spring-valve-cartridges-brass
Please send an email containing You invoice address and delivery address to mail@octopus-office.de We can arrange shipment to Egypt on individual basis. If You like :)
Hello, I'm trying to contact you from the last week by email or using the contact form. I've sent the business license for the business account activation, but I've not received any answer. Can you please tell how to contact OctopusConcept ?
***** Sending the same tech enquires multiple times to mail@octopus-office.de but I don't receive any answer, only order questions receive a reply. Can you please tell where to send technical questions about the purchased products ?
gl hp We have checked our inbox and were not able to find an email from Your email address. We are very sorry! Please ask anything You want here in the UA-cam comment section.
Do these two procedures work in lieu of using two alternating cartridges: 1 - hp-officejet-pro-8600.printerdoc.net/en/work-with-ink-cartridges/usage-information-collection/. 2 - www.compandsave.com/Troubleshooting_Remanufactured_Ink_Toner_a/172.htm?ref=SAS&usource=ss&affiliate=SAS314743. These options are available on my system. Thank You.
The serial number of the cartridge is stored inside the printer´s memory. According to our experience any other method than working with alternating serial numbers does not effect the recogition of a refilled cartridge for printing.
Process worked smoothly. Used to the chips on the color cartridges and refilled black before it reached depletion. All set. Thanks for your videos and products.
I will never buy an HP again i updated my printers software and one of my inks ran out i replaced the cartridge with a non hp. Cartridge and my printer gave an error message and started sending the print head to the right and spitting the ink out on purpose no reset or even putting original ink cartridges fixed the problem. It almost felt like Hp sent out a virus to infect printers using non hp cartridges . Stay away from Hp i just bought an epson Eco tank printer and i love it the epson ink tanks aren't even that expensive.
Thanks for Your feedback and sharing Your HP firmware update experience. The only comfort is that You are not alone - sorry this doesn´t really improve the situation ... From time to time HP´s updates aim to exclude alternative material from beeing workable in their printers. That really sucks! We are also big fans of the EcoTank printers as the business modell is a bit better in our opinion: You pay a higher price for the printer but the inks are reasonable price and do not create that much waste...
Hello Steve - real accent 😑 born, raised and living in Germany - beeing happy to be understood by most of the people when speaking English - not trying to fool anybody.
This seems to be one of the simplest methods, that I've seen, to refill the HP 950 series cartridge. Thanks so much!
Thx for Your feedback - the methods requires a bit training, so please be patient...
Thank you for this excellent, informative video! We were successful in refilling cartridges with your help.
Appreciate Your positive feedback :)
Best ink refill tutorial i have seen. Thanks👍🏻
Hello Andre, thanks for taking the time and giving this positive feedback!
Great video, really, really helpful! Very well and clearly explained, good video showing exactly how to refill the cartridges. Thanks and keep up the good work
Hello Steve, thanks for taking the time and providing this outstanding feedback! We are happy that our tutorial was able to help....
If you would like to know how our professional Qu-Fill refill tool can be used, take a look at this video. It shows the refill of the HP 950, 951 cartridges. (LW)
'Two thumbs' up for your very simple and informative tutorial!...
Hello Robby, same to You for Your positive feedback ! Great attitude !
It's fantastic it helped me a lot and one more thing I want to know about HP 960XL cartridge refilling please upload the video of HP 960 XL
Thank you very much for this fantastic feedback! HP 960 is the code of the HP 950 for India region. So refilling HP 960 XL is the same as refilling HP 950 XL. The ink volume for the XL versions is bigger than the ampount of refill ink for the standard yield versions.
Good job. Demo video worked OK for me. Thanks for sharing.
Hello Jack, thanks for Your positive feedback. We are glad we could help.
Hola. Desde España. Me encanta de como has pensado este adptador. Es el mas simple, perro el mas profesional de que he visto en internet. Me interesa si puedo hacer un pedido de este adaptador de aquy de España. Me simplifica mucho el trabajo. Muchas gracias!
Usted puede comprar el adaptador aquí: www.octopus-office.de/en/shop/details/c/tools-equipment-for-ink-refill/p/qu-fillTM-profi-fuer-kugelventil-refill-hpR-932-950-970-aus-messing/
Disculpen nuestra mala español.
When I was refilling the black cartridge I forgot to put the tape ,while printing I found contamination on yellow printouts when I used another black cartridge everything is normal so I have one refilled black cartridge with a problem how to fix it if I sucked all ink and refilled it may that fix it.or any other solutions please to fix this cartridge ,how to clean these vent air tubes if have residues .
Thanks for Your quesstion. We assume fromm Your description that there is too much ink inside the refilled cartridge or the pressure inside the cartridge might be wrong. So extracting the ink from that cartridge and taking care of reoving the air from the air bags, then refilling it properly again can fix the cartridge´s problem.
Thanks, I’m sad that I’m unable to find this in my country
Sorry to hear that. From where are You contacting us?
@@octopusoffice I'm contacting from India.
Hi, very good explanation. I have a T120, this method can be use with HP 711 cartridge? If no, could you give me an option.
+Vinícius Borges Thanks for the question. We have not tested HP 711 ourselves, but customers told us they tried and it worked.
+OctopusConcept , which chip they are using?
According to these customers they are working with the leap frogging method. That means they have a couple of original cartridge sets available and use them rotationally.
Very Cool Thanks a lot for the great info!
+Fabian Gonzalez
Thank You! We appreciate your positive feedback!
I've basically been refilling these using the same port you do but by forcing the ink in. I'll have to try this way and compare, because when I refill the cartridge always bleeds through the print head forcing me to print several pages of that color and run a print head clean operation until it starts printing normally.
+Chipperowski Thank you very much for sharing Your experience with us. Forcing the ink in creates a positive pressure inside the cartridge, assuming that You do not release that pressure. This pressure pushes the ink through the print head and the result is as You describe it.
+OctopusConcept why this create positive pressure! are the openings have one way valve or what is inside the cartridge
There are no openings that lead from the ink tank to the outside directly. Therefore pressing in the ink into the ink tank compresses the air in there, without releasing the air to the outside and without leading that air out of the cartridge.
The air ports on the cartridge´s front and side lead into little plastic bags inside the cartridge, but they are not connected to the ink tank section.
I've been using this method combined with forcing on HP 972. I always end my refill procedure with negative pressure. Great success. No more bleeding.
Thanks for contributing Your experience. The nagative pressure at the end releases the pressure from inside the cartridge. Therefore no more ink is pushed through the print head by that excess pressure.
Hello,
950 is verry simillar to new HP 711 cartridges that are used for large printers,designjets T120 and T520.Can you tell me if the refill procedure is the same? Thanks!
Thank you for tutorial. Is this tools available in India?
Please let me know.
Thank You very much for Your positive feedback to our tutorial. We are sorry to say that we have no reasonable way in meaning of costs for shipment to get the tool to Indian customers :(
I know that this video was some time ago but if you could let me know where I can buy this QU-Fill tool in Canada these days January 2024 Thank you. This method shows me that you are the one that knows that if you remove air it will be replaced by the ink
Thanks for reaching out to us about the refill tool. Yes, You are right this method for refilling HP 950/951 and similar cartridges has aged a bit already 🙂 At the moment we do not have a partner in Canada for selling or distributing our refill tool solutions. Please send an email with Your postal address to mail@octopus-office.de (final receiver should be Matthias). We figure something out to get something going to You...
I have a HP 9025 and I would like to buy the refill kit how can I do this i live is the United States.
Thanks for contacting us about the refill tool. You can purchase from our online shop to US.
www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-953-970-980-and-primera-spring-valve-cartridges-brass
Can I use all this equipment and ink for my HP Designjet T210 plotter and the cartridge is Designjet 712 black? Thank you.
Hello Carlos, thanks for Your question. From our customers we know the brass refill tip also works for HP712 cartridges - we have not tested this by ourselves to be honest.
After refill do we need to change the chip too?? If so how do we change the chip? Do you have a video on how to replace the chip?
Please check the following link to get to our instruction for installing the alternative chip on an original cartridge: www.octopus-office.de/info/en/ink-refill-instructions/ink-refill-instructions-for-hp/hp-950-hp-951-cartridges-with-chip/replacement-chips-for-hp-950-hp-951/
hi do you have to change the chip when you refill cartridge for the refill to work
Hello Darren, thanks for Your question. When You are working with alternative chips - we recommend to use them until the printer does not accept them for further print jobs. This way You make the most use of the costs for each chip. Your displayed ink level information may not be absolutely correct - but as long as You take care of that there is sufficient ink available inside the cartridge - You will have no problem.
Hello, can you please tell if the refill method works using depleted original HP cartridges with original chips (NON Setup version) and alternating them, e.g. replacing the empty cartridge with another refilled one ?
Thank You very much for Your question. We assume You refer to HP 950, 951 cartridges. Please check the following link that explains the situation of the serial numbers of depleted original HP cartridges:
www.octopus-office.de/en/info/ink-refill-instructions/ink-refill-instructions-for-hp/hp-950-hp-951-cartridges-with-chip/managing-hp-950-hp-951-serial-numbers/
The method to work with refilled cartridges wthout replacing the chip is the so called leap frog method. For HP printers using 950, 951 cartridges You need to have 4 cartridges of each color available. Mark them with numbers and use them in rotation.
@@octopusoffice Your link shows nothing on your page except the title.
@@ricardomierz8467
Hello Ricardo, please try the following link. You should reach the overview page what refill tutorials we have available for HP950 HP951 cartridges:
www.octopus-office.de/info/en/ink-refill-instructions/ink-refill-instructions-for-hp/hp-950-hp-951-cartridges-with-chip/
En donde puedo conseguir esos adaptadores para rellenar los cartuchos soy de México
Gracias por la petición. Hay un vendedor en los Estados Unidos. Eso está al menos un poco más cerca de lo que estamos en Alemania.
www.rjettek.com/5110-qu-fill-professional-tool-for-filling-hp-932-933-950-951-970-971-cartridges/
How about the double size black cartige, like the one on you video, it is twice as thick as my other black ink cartige 950XL does it take 86cc ????
We only know about the HP 950 XL cartridge as the biggest cartridge. The 950 XL`s cartridge body is bigger physically as the standard yield cartridge.
The 950 Xl refill ink amount is 53 ml.
Genial!! muchas gracias
Danke fürs positive Feedback!
Hello, can I use the QU-FILL tip to refill HP 932 and 933 cartridges.
Rgds
John Pilbeam
Hello John, the QU-Fill works for HP 932 and HP 933 too.
The instruction in the link below uses a tool similar to the QU-Fill professional:
www.octopus-office.de/en/info/ink-refill-instructions/ink-refill-instructions-for-hp/refill-instructions-for-cartridges-hp-932-hp-933/refill-instructions-for-hp-932-hp-933-cartridges-with-qu-filltm-syringe-caps/
Regards
The Octopus Team
sir is it necessarily that we need to not cover the openings by tape...or it is only with this catridge.please let me know.I use hp46 catridge.
HP 46 carridges are a totally different story. They cartridges with an integrated print head. You can refill them by using the air ports in the cartridge´s upper lid. These aor ports are usually hidden beneath the original HP label.
Hello enjoyed your tip, how do I get this metal adapter? I can buy somewhere or you could send me the dimensions for me to do one?
Thank You very much for Your feedback! You can get the refill tool from OCTOPUS®
www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-970-spring-valve-cartridges-brass
way simple with out the saw and mess.
+Invest In Gold & Silver Thanks for the positive feedback - a bit of practive and You are able to fill these cartridges with spring valve clean and easy!
And thank you for your time and answers
You are welcome..
Hello
Great video
Do u sell only the little tool u inject there?and how much ml i need for every cartige
Thanks
Hello Tom, we sell basically everything You need for refilling HP950 and HP951. The ink quantity depends on the type of cartridge that You are refilling.
Standard version
HP 950 Black 23 ml / HP 951 CMY 9 ml
XL version
HP 950 Black XL 53 ml / HP 951 CMYXL 17 ml
How many mls of ink for the small color 951 cartiges and do you ship ink and adapter to usa?
The standard yield HP 951 cartridges take 9 ml of refill ink.
We have a video about the ink quantities: ua-cam.com/video/srSRfWUYAsA/v-deo.html
Inks You can buy here:
www.octopus-office.de/shop/en/printer-ink/printer-ink-hp/hp-940-942/419/refill-ink-kit-for-hp-932-933-940-950-951-four-colours
Tool can be bought here:
www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-970-spring-valve-cartridges-brass
Yes we ship to USA taxfree.
Wenn die Patronen mit diesem System aufgefüllt wurden, ist man danach direkt in der Lage, zu drucken?.. oder muss man einen zusätzlichen Chip erwerben? Zeigt der Drucker, die Patronen nach dem Auffüllen als befüllt oder als leer an? Ist man in der Lage, den Druck mit "leeren" (aber aufgefüllten) Patronen durchzuführen?
+Sherlock Holmer
ua-cam.com/video/7gpjxxmjuzo/v-deo.html
Wenn Sie den Chip nicht tauschen möchten, benötigen Sie 4 originale Patronensätze, welche Sie rotierend, nacheinander in Ihrem Drucker verwenden. Ohne Tausch des Chip wird eine nachgefüllte Patrone als leer angezeigt.
+OctopusConcept
Vielen Dank für die schnelle Antwort!
meinen Sie damit 2 Patronensätze a 4 Patronen, sodass man zwischen den Patronen einmal rotieren kann?
Lässt man bei dem rotieren, die jeweils im Drucker vorliegende Patronen vollständig leer werden oder muss vor dem vollständigen Entleeren gewechselt werden?
Wenn die Patronen nach dem Auffüllen und Rotieren als leer angezeigt werden, ist man danach noch in der Lage zu drucken?
Mit freundlichen Grüßen
Sherlock
+Sherlock Holmer
Nein, leider meinen wir tatsächlich 4 komplette Sätze Originalpatronen. Der Drucker merkt sich 3 Patronenseriennummern pro Farbe. Erst nach Verwendung der vierten Patronen "vergisst" der Drucker die Seriennummer der ersten Patronen und Sie können diese dann wiederbefüllt ohne Tausch des Chips in Ihrem Drucker zum drucken verwenden.
From were i can buy the tip which attached to the syringe
Hello Jobin, thanks for Your question! Where are You based at?
thank you very much !!!!!
+Sayed Hasib Mohammadi Thank You very much for Your positive feedback.
+OctopusConcept
your welcome
مرحبا من اين احصل على هذه الاداه التى تركب على المحقن
Ok gotthe gist of it but where do you get the tool form??
Hello John, the tool is available here: www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-953-970-980-spring-valve-cartridges-brass
Can you please tell me how much ink for the 951?
The standard yield HP 951 cartridges take 9 ml of refill ink.
We have a video about the ink quantities: ua-cam.com/video/srSRfWUYAsA/v-deo.html
Hello Sr.
changing the ship is always needed when refilling ? In my specific case, I have 2 sets of OEM cardbridges, one just finishing now and one brand new,
switching between them (so know I will be using the knew one and once that one is done refilling the old one refilled ? will that make them work without changing cheaps or its mandatory ?
Thanks in advance, really good looking product and looking forward to put my hands on him. The ink is top quality ?
Hello, thanks for the question. If You want to refill the originals without changing the chip You need to have 4 sets of original cartridges. The following link gives You an explanation why:
www.octopus-office.de/info/en/ink-refill-instructions/ink-refill-instructions-for-hp/hp-950-hp-951-cartridges-with-chip/managing-hp-950-hp-951-serial-numbers/
Damn... So even buying the x8 Cheaps pack, I will have enough just for 2 (4x2) refills, before having to buy new chips, right ? Once they're on, you cannot just unstick them from the cardbridge and use the initial card bridge serial?
Do the ships works fine on HP 8600 ? They recognize them as original or adaptable ?
Otherwise the other solution is buy another set ? It will work with adaptables ones ?
Thank you for your answer, I will probably be buying your product for the tip and nice system.
UP. Looking at your web site, it says the chips are usable for 1000 prints each ? Thats correct ?
You can give it a try to pry the alternative chips off after You have used them for printing and go back to the original chip. If the original is still intact it could work.
The chips are reliable. For legal reasons the cartridges with such a chip on are recognized by the printer as non-original.
What the fuck are you talking about?.. What ship?.. You make me want to throw up with your version of English..
On you website the declared amount of inch for HP 950 XL Black is 53 ml, while on your video demonstration is 86 ml. Can you please tell which is the correct amount ?
The right amount of ink for HP 950 XL is 53 ml. Thank You very much for pointing to that fact. The suggested amount in our video is based on an outdated recommendation by the manufacturer of the alternative chips. We found that overfilling may have a negative effect on the printing result. So we reduced the filling amount to 53 ml which is equal to the original ink amount.
Can you tell which types of ink is best for 7740 printer office jet printers
Suitable inks for HP 953 cartridges You can find here: www.octopus-office.de/shop/en/printer-ink/printer-ink-hp/hp-953/
do air openings open on the ink chamber or on a bladder.
The cartridge´s air ports do not lead into the ink chamber directly. They are connected to plastic bags inside the cartridge.
+OctopusConcept does the pressure inside the air bladder controlled by th printer or it's just a connection to atmospheric pressure cuz some Chinese refillable cartridges have those air openings in other areas not like the genuine one. Another question, how the auto clean printhead works? is it related to cartridge by a way or another or it is a separate mechanism.
The air port on the front of the cartridge facing towards trhe printer is used by the printer for checking the ink level inside the cartridge. The air ports on the sides of the cartridge help to use the full amount of ink from the cartridge.
We know about the alternative cartridges from China or somewhere else - we really had bad experiences with them. They have direct opening from the outside to the ink chamber - leaking was not to avoid at all.
I am not sure what You refer to by mentioning the auto clean print head.
please look into our other reply.
hola me me intereso mucho pero me gustaria saber si ustedes venden el adaptador para inyectar tinta
Usted puede comprar el adaptador aquí: www.octopus-office.de/en/shop/details/c/tools-equipment-for-ink-refill/p/qu-fillTM-profi-fuer-kugelventil-refill-hpR-932-950-970-aus-messing/
Usted no encuentra su país al hacer el pedido con nosotros?
www.octopus-office.de/en/info/questions-answers/information-about-order/your-country-is-not-listed-in-our-selection/
Disculpen nuestra mala español.
Hello! The air bag inside the cartridge is important for cleaning. This is why I have a question - is this air bag one-way or not? If you insert ink into the ink channel, does the exact volume of air leave airbag through the holes - or it stays? Because when the cartridge is refilled, and the air in the bag stays same, printer can not clean printhead by pushing air in that cavity anymore, hence one will need to manually clean the printhead from time to time. Thank you!
Majou Nexian Hello, thank You very much for sharing Your expertise with us. According to our experience and knowledge the plastic bags inside the cartridge are involved in the management system of the the ink level. In the original condition these bags are free of air. Later on, when ink has been consumed by printing the printer presses air into thesea bags. From the resistance that is necessary to get air into the bag the ink level management system can calculate how much ink is actually left inside the cartridge.
Based on that we recommend to make the bags as much as possible free of air by extracting the air with a syringe out of the air port carefully.
*****
Thanks a lot! But how do you get air out with this refilling method? What confuses me is that you put a tape on air openings and try to reverse-push the air inside. The bag is full at this moment, so only little ink can come in. One can only have full bag and empty ink, or full ink and empty bag. And if one lets air in ink segment, then its not very smart either - because this will still leave a bit of air inside. Which may travel in the printhead at the end. I found a much more interesting approach yesterday that I would like you to have a look. It still requires your tool (or a like), but the way is better, as airbag is completely depleted in the process: /watch?v=lHyiv1Y0UhU
PS. We already "met" with air compressor of my 8600 :) as I were going to modify the printer with rest ink bottle modification - as I do with photosmart. I was really puzzled at first, but then I consider this printer to be extremely reliably built. Still, it would be cool if they would made waste ink box removable from outside (like Epson), so people don't get all the waste ink all over the printer when transporting. Well, better this than ink counter...
Majou Nexian We first extract the air out of the bags by pulling it out of the air port by using a syringe. After that we start taping the openings. Sorry, we did not make that 100% clear enough. Bag is air free. air port is closed- if You now create negative pressure inside the ink compartement, no new air can enter the bag through the air port.
*****
That explains a lot, thanks!!
***** when you remove the air from the bag, do we need worry about any air going back in after the syringe is removed ? or is it best to extract air and leave the syringe while we tape off the holes? or is there no worry at all...
How can you buy this item?
How many valves are required One for each color or only one for the four colors?
Shipments to mexico city?
Hello, actually one refill tool is enough to refill all colors - just clean it by rinsing it with water when switching to a new color.
You can buy the tool here: www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-970-spring-valve-cartridges-brass
@@octopusoffice can you pls send one to kuwait how much it will cost
the technique is excellent but... the price here in the US which is $104 i'd rather just buy the oem brand which are $22 US dollars for all the inks. so my question is.... how many times can you refill using this refill tool?
Hello Riko, thanks for Your question. The number of possible refills using the set that is linked in the video description is limited by the amount of chips on this set. There are two new alternative chips for each cartridge included. So You can refill each cartridge two times . So the price for the OEM cartrifges would be arround 200 USD.
How do you order from the United States? They don't list the US on there check out form!
Hello John,
Thank You very much for Your question about the delivery to United States. Either You send us an email with Your wanted products and delivery address to mail@octopus-office.de and we will reply with Your individual offer or second option We forward Your request to our reseller in US. For the second option we also require Your email address.
I need a little help. I have this 8600 plus printer and lately i refilled the 950 and 952 xl cartridges but since then, they are spilling inks profusely especially black and without using, my cartridges are almost empty without use. So i opened this side and front cover to check the ink spill box and i found lumps and lumps of black grease like ink there. What can be the reason and how can i set it right?
Hello Aumar, thank Ýou very much for the question. Did You use our tool and method to refill Your cartridges? Did You refill original HP 950 XL and 951 XL cartridges?
@@octopusoffice no dear i didnt since i dnt have it. I live in indian occupied Kashmir and dnt know how to get it. I gave my cartridges to a refilling shop who seemed to be confident of what he does though i didnt see him refilling. He confirmed that he did apply negative pressure first.
Hello Aumar, thanks for Your explanation. The information about the negative pressure is important. One reason for a leaking HP950 HP951 can be that the cartridge is pressurized - then the ink is pushed out when the cartridge is set into the printer. When the refiller did the job right the refilled cartridge should not be pressurized. Another possible cause for the leaking could be that the rubber seal in the ink port is damaged. If the refiller has used a tool that inflict some damage to this seal the cartridge can be leaking through the print head into to waste ink pad without beeing used for printing.
@@octopusoffice how doni check if the cartridges are pressurised. Can i reduce it?
When You have the newly refilled cartridge place it in front of You the ink port pointing upwards. Then open the ball valve, that closes the ink port, by pressing a thin screw driver into the ink port carefully. through the open valve the postive pressure should be released and the pressure inside the cartridge should be neutral.
Wonderfull. Ttank you.
+Márcia Mota dos Santos Thank You very much for Your positive feedback!
Thank u but I need to know how to make the chop work
The chip
Hello Marlene - thanks for Your question. The chip is a topic for itsself. Either You change the chip after each refilling or You have a couple of empty original cartridges available then You can use them rotationally. The printer stores 3 serial numbers - when installing the 4th cartridge the printer "forgets" the first serial number - then You can use this first cartridge refilled inside the printer for printing BUT You will not have a displayed ink level.
Please check our instruction on how to change the chip:
www.octopus-office.de/info/en/ink-refill-instructions/ink-refill-instructions-for-hp/hp-950-hp-951-cartridges-with-chip/replacement-chips-for-hp-950-hp-951/
can i fill the HP950 with the genuine HP GT53?
Hello Emad, thanks for Your question. The HP GT53 original ink is for the HP Smart Tank 515 printer, right? We cannot recommend using this ink for HP950 cartridges - we have not tested the HP GT53 ink but we assume the the print head characteristics are different from each other.
Can you give me Tips how to fix my SENSOR to enable me print successfully?
Hello Ben, thank You very much for Your question. What sensor are You refering to in Your printer?
how to refill HP 953 cartridges ? the same procedure or...?
We assume that this refill method works for HP 953 too, but we have not tested it as the refill inks are still under development (status Oct 7th 2016).
Hi i am interested in the product, realises cargo to Mexico? It is for printing 8610 HP
Yes, we ship to Mexico. Check out our shop:
www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-970-spring-valve-cartridges-brass
Thank you...
You are welcome - thanks for Your feedback 👍🏻
HI
i have 2 questions
-HP 7110 use pigment ink and 7500 use dey ink which one you prefer
- what you will do with the chip on the cartridge when the printer recognize the you refill the cartridge
Mohammed Duqmaq Thank You very much for Your question.
The HP Officejet 7110 works with HP932 and HP933 cartridges. Each cartridge is filled with prigmented ink. So for refilling You should also go for pigmented refill inks. The print head in these printer models is adjusted to this kind of ink.
The HP Officejet 7500 works with HP920 cartridges. The black HP920 cartridge is also working with pigmented ink - so please go for pigmented refill ink suitable for this cartridge. The HP920 cyan, magenta and yellow are dye based inks, for the sake of Your print head You should use such inks for the colors cyan, magenta and yellow in HP920 cartridges. This has a positive impact on the life span of Your printer´s print head.
There is no chip resetter available for both printers.
But there are alternative chips that You can use to replace the empty old chip. Then You have a full working cartridge again after refilling.
***** Thank you very much for this value information, i have problem i what to share with you, after i show your video man times i bought hp 7110 i used the setup cartridges it was OK i now some stores i bought form him ciss system but i dont know what kind of ink in it any way i install the ciss the printer gave me that the ink is not original and start on before the test page it gave me error with the cyan color and no way to print i bought another original cartridge the same error still i watched too many videos to fix this problem no way, one last thing how we know the difference between dey ink and pigment ink, ooh some thing else i found the ciss filled in wrong way the but black in magenta and magenta in black Yalow in cyan and cyan yalow in cyan it was miss i change it the problem is the same
thank you very much
Mohammed Duqmaq You say that You receive an error message. We need to know the exact error message or code that You receive from Your printer to be able to provide You some guidance to solve Your problem.
I've heard some people say that there's a chip inside certain HP cartridges to prevent refilled one from working :/ Is that true?
Thanks for Your question. Actually there is a chip on these cartridges on the outide. This chip has a serial number on it . This number identifies the cartridge towards the printer and the printer memorizes this number. As long as the printer knows this number and thinks that this cartridge is empty it refuses to print with this refilled cartridge. You have to make the printer to forget about the serial number of that cartridge.
Please check the explanation to this topic on our webpage: www.octopus-office.de/info/en/ink-refill-instructions/ink-refill-instructions-for-hp/hp-950-hp-951-cartridges-with-chip/managing-hp-950-hp-951-serial-numbers/
I see. Thank you for the clarification!
You are welcome
Great tutorial, muchas gracias!!
Thanks for taking the time and giving feedback!
Dose it work for HP 711 Cartridges
Thanks for the question. We have not tested the HP 711 but according to hear-say from our customers the methos can be applied to HP 711 too.
@@octopusoffice Thank you.
Hi, Where can I buy this recharging system. QU-Fill
I'm in Colombia
Thank You very much for contacting us about the refill tool. Please send us an email to mail@octopus-office.de containing Your delivery address in Colombia. Based on that we can make You an individual offer.
It works in HP 711 cartridges?
We have not tested it ourselves, but according to our customers this method also works for HP 711 inkjet cartridges.
i am on indonesia. how i can buy you refill tools? can i buy it on ebay?
You can send us Your delivery address and products which You would like to order to mail@octopus-office.de
We can process Your order manually.
o produto e TOP, mas voces nao oferece pagamento via boleto... e isso dificulta eu e muita gente aqui no Brasil que deseja adquirir
Obrigado pelo feedback positivo. Infelizmente, não enviamos para o Brasil através da nossa loja online. Pedimos desculpas.
I followed the exact steps and refilled 950XL black cartridge. When I inserted to my HP Officejet Pro 8610 printer, it keeps on giving Error: Ink cartridge depleted. Depleted cartridge must be replaced.
I have tried re-inserting the cartridge and even restarting, it still keeps on giving me this error.
I don't know what to do.
Please let me know any fixes for this?
Hello, thanks for the question. Please check the following link. It is a description about how to handle the serial numbers of HP 950 HP 951 cartridges.
www.octopus-office.de/info/en/ink-refill-instructions/ink-refill-instructions-for-hp/hp-950-hp-951-cartridges-with-chip/managing-hp-950-hp-951-serial-numbers/
Ye kabhi riffil nhi hoga ye dikha rha hai riffil karke lekin printer mein support nhi karta mai hp 8610 lekar bahut pareshan hua maine 15500 ki hp 8610 printer liya tha uska cortidge change karte karte pareshan ho gya aur 4000 mein sale kar diya jise sale kiya usko pta nhi tha ki riffil nhi hota nhi to use koi nhi leta.
@@pt.rahulpandey7422 What the fuck did you say?.. Your camel has fleas and diarrhea and spits in your face?
Where I can buy this litle item
Hello Guillermo, thank You for contacting us. The refill tool is available at: www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-953-970-980-spring-valve-cartridges-brass?sPartner=UA-cam001
In case You are writig from US - You can also purchase from: www.rjettek.com/5110-qu-fill-professional-tool-for-filling-hp-932-933-950-951-970-971-cartridges/
Will this works for 955xl
This method of bringing in the refill ink into the cartridge also works for HP 955 too. Make sure not to fill more than the original amount of ink. Overfilling disturbes the physics of the cartridge.
Do you have a shop on aliexpress.com?
We are sorry - not YET.
How do I buy from México?
Dear Jonathan Ramos, thank You very much for Your question. You can buy the tool at www.octopus-office.de/en/shop/details/c/tools-equipment-for-ink-refill/p/qu-fillTM-profi-fuer-kugelventil-refill-hpR-932-950-970-aus-messing/ directly.
Our online order process You pay German VAT in the first step - we refund this tax back to Your creditr card or PayPal account.
Please send further questions to mail@octopus-office.de
Best regards
The Octopus Team
You can find useful information about worldwide shipping special rates by using the following link:
www.octopus-office.de/index.php?id=2813&L=1
and what about chip reset...?
There are suitable replacement chips available. Please check our video about these chips: ua-cam.com/video/IthcIe9MJNA/v-deo.html
How do i get that Tool
You can order it from OCTOPUS® directly:
www.octopus-office.de/shop/en/refill-supplies/ink-refill-supplies/tools-equipment/1935/qu-fill-profi-for-hp-932-950-970-spring-valve-cartridges-brass
OctopusConcept
i'm from Egypt
Please send an email containing You invoice address and delivery address to mail@octopus-office.de
We can arrange shipment to Egypt on individual basis. If You like :)
plz any solution HP office jet pro 6960 ink cartridge refill (hp 905) product no . J7K33A
I read read it . 53 CC
:) that´s the right quantity
Hello, I'm trying to contact you from the last week by email or using the contact form. I've sent the business license for the business account activation, but I've not received any answer. Can you please tell how to contact OctopusConcept ?
You can write to mail@octopus-office.de directly. Sorry that we have not responded to Your email yet. From which email You have been writing?
***** Sending the same tech enquires multiple times to mail@octopus-office.de but I don't receive any answer, only order questions receive a reply. Can you please tell where to send technical questions about the purchased products ?
From which email You have been writing?
***** The last was sent from glsis-oct@yahoo.com. Please let me know if you have recived it ...
gl hp We have checked our inbox and were not able to find an email from Your email address. We are very sorry! Please ask anything You want here in the UA-cam comment section.
Is your product, sold on aliexpress.com?
try to install your product on aliexpress.com, because I want to buy via aliexpress.com
You are not the only one asking. So we will do so in the near future. At the moment we can not offer our service to You on alibaba.
ok
Do these two procedures work in lieu of using two alternating cartridges:
1 - hp-officejet-pro-8600.printerdoc.net/en/work-with-ink-cartridges/usage-information-collection/.
2 - www.compandsave.com/Troubleshooting_Remanufactured_Ink_Toner_a/172.htm?ref=SAS&usource=ss&affiliate=SAS314743.
These options are available on my system. Thank You.
The serial number of the cartridge is stored inside the printer´s memory. According to our experience any other method than working with alternating serial numbers does not effect the recogition of a refilled cartridge for printing.
Thank you for your response. Much appreciated.
welcome!
Process worked smoothly. Used to the chips on the color cartridges and refilled black before it reached depletion. All set. Thanks for your videos and products.
Thank You very much for taking the time and giving positive feedback!
I will never buy an HP again i updated my printers software and one of my inks ran out i replaced the cartridge with a non hp. Cartridge and my printer gave an error message and started sending the print head to the right and spitting the ink out on purpose no reset or even putting original ink cartridges fixed the problem. It almost felt like Hp sent out a virus to infect printers using non hp cartridges . Stay away from Hp i just bought an epson Eco tank printer and i love it the epson ink tanks aren't even that expensive.
Thanks for Your feedback and sharing Your HP firmware update experience. The only comfort is that You are not alone - sorry this doesn´t really improve the situation ... From time to time HP´s updates aim to exclude alternative material from beeing workable in their printers. That really sucks! We are also big fans of the EcoTank printers as the business modell is a bit better in our opinion: You pay a higher price for the printer but the inks are reasonable price and do not create that much waste...
fake accent? sounds cheesy.
Hello Steve - real accent 😑 born, raised and living in Germany - beeing happy to be understood by most of the people when speaking English - not trying to fool anybody.
Wonderfull. Ttank you.
Thanks for Your feedback :)