I've been toying with the idea of going wireless for a while now, but I didn't know what to look for, so thanks to this review, I'll be picking a couple up for sure!
I’m glad to hear the video helped you make up your mind. I really love mine and don’t see myself going back to a cord ever. Honestly if these Dayami I’ll just buy another set. And thanks for watching John appreciate the support🤘🤘🤘🤘
That video should be coming in the next few weeks. I will be explaining how I did the RCA conversion to my machine. Keep in mind this WILL void your factory warranty. So it may not be for everybody. I couldn't find any videos explaining how to do it or what not so I just took the risk and I love it! Thanks again for watching!
Yes I am sooo sorry about delaying that. I will prolly make a short video just to get that info out there for you guys. I didnt get video of me doing it but I think I should be able to explain it and show a couple of pics that should be enough to get idea across. THank you again for the reminder to make that video sooner then latter. 👍👍👍
Hey Dave... Finally got 2 of these from Amazon "they were out of stock for a long while"...I used them last night on a tattoo that took 4 hours. Ummmm it had 81% charge left when I was done "WTF????" lol!! I was using the CNC-Q2 "The Pill"
Great little power supply I've owned one for a few months now and have actually used it . Not what I would use working in a street shop but for just noodleling around it's cool. Truth be told I'm a coil man and pen machines are still a novelty.
i was sceptical about these, but thought i would get one or two after watching this, well they must be good as i cant even seem to get one on amazon, well not this exact type anyway, they are also so much more expensive in the UK
Pulsations found in cheep China batteries cause the motor to fail prematurely. They can display actual voltage. But micro drops are not detected by volt meter. That’s the issue.. Les expensive battery doesn’t turn off even when not in use. So basically it will not store energy. No safety fuse either. Consider it’s not just about the voltage. It’s the amount of amps that translate to amount of watts your motor maxes out on.
Id like to see reviews of other models because only thing that hold me back from this one is shape. Im afraid it may pull my machine. It feels like another small revolution in tatoo equipment.
Once these die, give up or quite I will certainly try a different brand and when I do I will share my experiences with everyone. I will say that you really dont feel the weight of this on your machine. Its really light weight and feels lighter then having a cable hanging off the machine.
@@ArtSomething I have the hard life battery pack. If I'm being honest, I haven't been unimpressed with their performance. They do seem to have a lag and communication for power, shutting down often unless I turn the machine on before I insert my cartridges. This means I have to stop, unwrap everything, and find a USB plug to reset it so it will run again. Also, they don't work so well all the time on other types of machines. For example, when I use my Xion they seem to have moments where the power becomes interrupted and causes the machine to basically stop and go. Now, this could be due to the fact that the connector for the battery pack is intended to go with the hard life Gambler or Omni. When I use the battery on my hard life rotary The Gambler I don't have any issues at all with the power supply disconnecting or having interruptions in the power. I do easily get 6 hours of work out of these batteries, which means I can do a 10 or 12 hour day if I want to. I think the problem with the Xion lies only in the fact that, like Cheyenne, each of these companies is creating something that will be proprietary mostly to their machines. However, unlike Cheyenne, these batteries will work on other brands of machines; even if only with minor issues. my friends that use the FK irons power supply and I've not had too many issues with FK iron battery have not had many complaints with their battery working improperly. Of course, they use them solely with FK irons machines. The shape of the battery won't allow for the use of it with too many other machines. I currently have a Cheyenne Sol Nova, FK Xion and Edge X, Hard Life Gambler, Killer Bee, Stylus, Kwadron Proton MX, HM Invictus and Centri Cobra. The Hard Life battery pack works on them all except the Killer Bee. It even powered a colleagues rca converted cool machine. He bought a battery pack the next week.
I have bought a couple to try, just have to wait on the slow boat from China as they are hard to find in the UK, there are some retailers here but at three times the price I will be patient.
That's awesome royston! 👍 I think your really going to enjoy them for sure! And yeah best to be patient then pay through the nose to have them sooner. Thanks for watching and let me know how you like them when you get the chance to try them out. 🤘
@@ArtSomething I cant believe it 2 days after ordering them a UK seller popped up on the bay with stock Grrrr. I also received a package with a CNC Q5 machine in, have you tried one? I think its amazing and the internals are very similar to a machine costing considerably more.
Great review..i love mine but yours cost more ..mine is like 20bucks..maybe because i live in asia and it's a lot cheaper to ship Edit: the moment you got the multi meter out.. i knew i have to sub🤣 Respect from the philippines🇵🇭🇵🇭🇵🇭
Oh God I really dropped the ball on that. I will be making that video.... well possibly today just so I dont forget again. Thank you Stephen for the reminder about that again. 👍👍🤘🤘
Oh thats dope travis!! Super cool to hear people trying new things!!!! You will have to send me a pic of it to my IG @daveinks.88 I would love to see it!! 🤘🤘🤘🤘
Would you be able to make a quick little vid showing how you wrap these? I assume you’d just chuck it in a bag and tape it shut, but I’d like to see just to be safe.
Great question If you watching this video ua-cam.com/video/mDLybi5kLPU/v-deo.html it's pretty much the same only I cut the clip cord sleeve short and tape it around the power pack if that make sense. Thanks for watching blackcat much appreciated!! 🤘🤘
I just got the Jet-Pack V.3 from ezgripz.com, they're on sale for 140 bucks and they're identical to what you have. I was skeptical about ordering the cheaper version from Amazon so I went with the more costly option. I love them. I can move around the piece I'm working on, just push my tray around to where I need it but don't have to worry about clip cords or cables, it makes me feel a lot more confident and capable. I have a Big Wasp RCA cable and it is 2.47oz., so actually a touch heavier than the wireless power supply. Plus being able to wrap your entire machine and power supply in one enclosed clip cord cover makes things extremely clean and simple.
Hell yeah man!! 🤘 That's awesome and exactly how I feel about the freedom from the cord, foot pedal and power supply.... I don't think I will ever be going back to a cable lol. And thanks for letting me know about the jet-Pack v3, because when these cheap ones die I'll be ordering those for sure! And thanks for watching, appreciate the support.
It works great . With normal power supply there is to much hustle to haw the constant tension , a good PSU, pedal , cabel etc . With wirless battery is better , constant voltage . The only 2 drawbacks I see is that the voltage has limitations and since is a bit heavy it will haw a bad effect when you do big tattoos 4 - 5 hours or even longer . Other than that I will definityl only use this . I also recommand getting 1 and test it out first .
I used that batt on my coil machine works great. But for my other pen machine it turns off. First one I order it jus stop. But for the coil I love that batt
Great video! I recently subscribed; first and foremost thank you for sharing your knowledge with us. I received a Dragonhawk Mast rotary pen and would like to know if this power supply will work with this particular machine. Thank you in advance; keep up the great work!!! 🤘🏼🤘🏼🤘🏼
No problem and Thanks for the support Danny!! I'm not familiar with all the different machines and what not. But these power supplies and others like it usually come with either an RCA hook up or a DC hook up. So you want to check your machine to determine if it has an RCA or DC hook up, then you purchase the one that fits the machine you have. I hope this makes sense and thanks again for supporting the channel! 🤘🤘
I got 5 of them bought from diffetent places.i you tattoing for long time then you know difference they even work even close to actuall main power supply voltage is way too unstable and you end up damging skin badly.
I got 5 of them bought from diffetent places.i you tattoing for long time then you know difference they even work even close to actuall main power supply voltage is way too unstable and you end up damaging skin badly.it takes so long to pack color in with them too.
I don’t know I just really like them. I’m sure many people don’t care for them but for me and for now I really like them. But thank you for sharing your experience with these types of power supplies👍👍
@@ArtSomething No worries mate.i myself relized once i set up both battery pack and main power supply togather.with main power supply shading was coming very smooth and easy and with these battery packs it bit hard was taking very long.lining was ok.color packing was even harder.i this it has to do something power supply is very unstable.i ordered many from different websites all had same issue.cheers.
Look up Stacey Dickson Sol Nova RCA or Iron Blood Cheyenne RCA in the search tab. Or, wait for his video. I love these videos and value the insight given.
I picked up the same version from Amazon. pretty much for the same reason unfortunately, mypack was defective :( it would not stay running. it would power off after running for a minute or two but I still wanted to give these a shot. so did a little research & I picked up a jetpack v2 wireless battery pack from ezgrips.com I got it for about 60 bucks on a flash sale it came in pretty quick I've been using it pretty regularly for a couple of months now on my axys machine's along with my musotoku in the mix just because I love that thing LOL... Anyways pretty much like you I have been pleasantly surprised by the power & consistency they put out and let's face it..... it is quite liberating not being attached to that RCA cord 😁 so I'm on board if you haven't already, I would definitely recommend checking out the jetpack wireless supplies from boneface at ezgrip.com there is a few different options as far as witch generation / version or style.... he also has the v2 wireless that I use and another generation sold individual or as a 2pack comes with USB c charge cable I just use my usb old cube from my old cell phone and they have the quick charge built in it'll take less than a hour to the charge from 10% to 100% and they last. They say 4-6 hrs run time. but again all depending on what you're running and what voltage etc I have ran my axys Valhalla between 7.5-9v and got a good 7+ hrs and still had a good 25% . So yeah I'm happy so far especially with all the different options there are now ranging from 30 to way more. I'm sponsored by hardlife and the nucleus which is a wireless power supply they say is 300 to alone ...& Much as I stand behind my sponsors then everything they've done so far this has been a much more economic way to try and use this new wireless fun :) sry so long of a comment half using talk and text while multi tasking. Anyway dope vid my friend stay safe and check out what my dude boneface at www.ezgrip.com has or check out hardlife 🙏🤙🏻🤙🏻. #lostsoul #wirelessfreedom #hardcoretattoobuffalony
Coming from 25 years of using cords and pedals..how has the adjustment/transition been to having a machine that is running constantly? This has been the main concern that has kept me away from the wireless revolution up to this point. I love the idea of freedom of movement and a cleaner work area but the idea of having a machine that is constantly running or having to push a button to turn the machine off every time I dip or pause to look at references etc.. I just don't know if I could get used it. I also wonder what impact the constant running has on the motor life of these machines. I'm really interested in hearing everyone's thoughts about this.
I thought the same thing only been using a wireless pen for a month now from switching from coil. Was giving me anxiety constantly having it running at first but now I’m used to it and well worth the switch
hey homie I'm looking for a battery for my FYT pen but cant find any can I make one fit it or no just wondering if you know if not all good my man keep inking much love up in Canada
Yes I keep the machine running and dip just the tip of the needle into the ink. Hope this helps. Thanks for watching. If you have any other questions let me know.
They make the wireless power supply in either RCA or DC connection. So I would check your machine to see what kind of connection it has. I hope this answers your question. Thanks for watching 🤘
These cheap Chinese power packs may ruin the RCA connection on xion pens. My machine now cuts out after I found my battery pack getting kind of loose and I,ve been trying to figure out the bad connection issue ever since.
Here is the link to the machine I am currently using and the video explaining why I bought it. I still use it and enjoy the machine. ua-cam.com/video/DoGBoJiDDjs/v-deo.html Hope this helps and thanks for watching!! 🤘🤘
They are holding up fantastically so far!! I will certainly let everyone know if/when they fail or start to fail. Thanks for the question Anthony and appreciate the support!!
Is there any way to connect this battery to the cheyenne hawk pen without converting it like how you did in the video?? Are there any other batteries for going wireless that fit the cheyennne ??
OH damn that really sucks, sorry to hear that badfish. I had the RCA version, I gave them away in the giveaway but they performed awesome for me and lasted hours. Seems like the quality assurance is lacking.
I use this power pack on a rotary tattoo machine. This should work with any machine that has and RCA connection. OR a DC connectioin as they offer these packs in either RCA or DC. SO check your machine and make sure its either RCA or DC and you should be good!!👍👍
Yes I have heard that a little bit but once charged to 100% by the time I use it it might be at like 95% so I have noticed a little but not enough to bother me.
HAHAHA yeah you always have to account for the 10% of people out there that just want to hate everything. We take them with a grain of salt. I appreciate you watching Keith!! 🤘🤘
Prob some infamous tattoo artist that hates that he's sharing tattoo how to's. You know the ones that call ppl scratchers but I'm sure they didn't start tattooing with sharpened bones and what not. Just typical haters in the tattoo industry. What other profession has ppl hating on someone trying to earn on their own?
Hey my Dude. Have you ever tried some of the other wireless options like the Rocket mini? Whereas they might have a more balanced feel with a pen type machine. But it looks like most are extremely limited on the voltage selection. I was wondering what are your thoughts on that before I try to buy something.
This is the only battery pack I have ever used. I will say that the weight of the battery doesnt bother me at all. I have been using these power supplies for a while now and havent had any problems with them. If these die on me or have a problem I will certainly let everyone know and if they do die I will try a new brand and see how that works, but so far so good.
The battery will last for about 3 to 4 hours maybe longer it just depends on what voltage your are running at. but it charges in about an hour so if you have two of them you should always have one ready to go if one dies on you. And thank you for watching please let me know if you have any other questions!
I don’t have a link for that machine but I do have a link for the machine I’ve been using recently. I have a review of it on the channel as well. It’s the CNC Q2. Hope this helps and thanks for watching!! 🤘
Yes you can as long as it have an RCA or DC connection, Just check your machine to ensure which one you have and then make sure you order the one that matches your machine either RCA or DC.
The wireless power supplies work with most machines as long as they have the same connections. So if your machine takes an RCA cable you want to ensure that the wireless power supply also is compatible with RCA. If you have a machine with a DC hook up do you wanna ensure your wireless power supply has a DC hook up. Hope this helps🤘🤘
@@DeucePlayz honestly this is my first machine, so I can’t compare it to nothing else. I jus started practicing, I’m going to eventually upgrade too. Bt I feel like it good for the price
I can only speak for myself when I say I prefer running wireless and the freedom of movement. the power and consistency seems stable. That’s not to say you couldn’t get a dud product that just doesn’t work. So I’m not saying it’s better I just prefer it.
@@ArtSomething What is the difference between DC & RCA ? I’ve been using coil machines as a beginner and want to try out a rotary but need a bit understanding of this any help ? Great Content btw !
I dont think this particular one is still around at least not for 30 dollars. I have some links to some other wireless power supplies in the description of the video that may help you out.
There are machines with DC connections and with RCA connections. If your machine uses RCA then you will want to buy an RCA power supply or vise versa. there should be an option of either DC or RCA.
Yeah I’m looking to the the CNC q2 ... so I wanted to try this power supply but I can’t find the option for rca ... could it be they’re Sold out or discontinued?
That makes a lot of sense and I totally understand that logic. I am looking forward to hopefully upgrading to the Critical as well or switching machines to the Spectra Flux.
Hey Dave, a few years ago I was deemed unable to work because of some neuro and musculoskeletal disorders. I started drawing and tattooing. I switched over to the mast tour max and cnc q2 tattoo pens with wireless as these are easier for me to handle. My question for you is this....I'm going to do a flower and vine tattoo on my wife. I'm wanting the flowers on alternating sides to look as though the are raised up off the skin. How do I shade underneath the flower to get this effect?
Just curious if you've ever tried the Jetpack Wireless branded ones that look and operate exactly like these? I was going to purchase from Amazon but I read somewhere that these cheap batteries have been blowing up
I have not tried jetpack. If these battery packs I have go bad or god forbid blow up.....( I haven't heard of this but anything is possible.) then I will more than likely go with the jetpack. Thanks for watching Legendary I appreciate it!! 🤘🤘
@@ArtSomething thanks for making these videos 🤙 Im planning on picking one of these up soon. One of my 2 jetpack batteries stopped working under 90 days of use. Luckily I got it on sale but it still came out to $50.
Is there any other power supplies that you have tried that are wireless that you have tried and that your would recommend I have the Mast Tour tattoo pen and it is rated by the manufacturer to not be ran above 8v and that the motor will burn out faster if I do and in that You said when you turn it on it starts at full power and then it slows down, if I were to get this one is there anyway that you could check if I turn it on and it’s not on the gun how if I then wait a minute to connect to the gun that it won’t jump to full power and then start at full voltage and then slow down so that I wouldn’t have to worry about it going over the rated voltage and burning out my power supply
Sorry John I havent tried any other wireless power supplies. I do understand your concern and I honestly dont have a good answer. While I don't think it should really hurt your machine, I also don't want to be the cause of your machine failing on you. Maybe someone who has used a different wireless power supply will see your comment and possibly be able to recommend something for you. Thanks for supporting the channel though John I appreciate it!! 🤘🤘
Art-Something ya no problem man I really like how your willing to help out others that are trying to get into the trade and don’t really have the means to just go and pay for an apprenticeship or something and your willing to give some advice it’s really cool and appreciated thanks
I don’t think that’s healthy for a machine to start at 10-12 volts especially if my machine max volts is 8 or 9…. I wish it didn’t have that jump start.
Yep I use it every day. Hell I just finished a tattoo five min ago with it. I cant speak for every one of them, all I can say as that the two I ordered are working great!! Hope this helps and Thanks for watching!! 🤘🤘🤘
Art-Something You’re a legend for the quick reply just want to head and bought one used your link hopefully it works out well and if it does I’m gonna order a second one any recommendations for a lightweight rotary
@@IrishArmy Thats awesome to hear Man I really hope it works out great for you. I always get a little nervous when I suggest things. Cause you never know when someone might get a dud. SO again hope it works great for you.!! I really like the CNC Q2, I have used almost every day since getting it and havent had any problems with it yet. THanks again man I really appreciate good people like yourself!!🤘🤘
Just an update, I have received my batteries and can confirm that they are very good, I'm pleasantly confused I had one running from fully charged at 8.1volts and it only went down to 76%.
Thats awesome to hear Royston!! 👍👍 I'm very happy with mine as well and surprised at how long they will last and how quick they charge. Glad your enjoying them 🤘🤘
I need to know if some one try it with an inkjecta flite nano , couple of months ago I try the conventional that doesn’t have a screen just a little leds light and my machine and my friends inkjectas works horrible have a really increase and decrease voltage ranges
Oh damn that sucks to hear man. I havent tried it with the inkjecta. I hope someone here can help guide you to the right equipment. Thanks for watching richard appreciate it!! 🤘🤘
Thanks bro yeah I really want to try one of theses wireless batteries but I have that problem with my machine I hope some one can help me haha but great videos man, new subscriber here from Colombia
Cheyenne uses a 3.5mm jack. At least thats how my Cheyenne hawk pen is. So these power supplies can be ordered in either an RCA connection or a DC connection but not it a 3.5mm connection. So in order to run these power supplies you would need to convert your machine to take use an RCA or DC connection. This will however void your warranty with Cheyenne. I hope this answered your question Kristal and thank you for watching!! 🤘🤘
I've been toying with the idea of going wireless for a while now, but I didn't know what to look for, so thanks to this review, I'll be picking a couple up for sure!
I’m glad to hear the video helped you make up your mind. I really love mine and don’t see myself going back to a cord ever. Honestly if these Dayami I’ll just buy another set. And thanks for watching John appreciate the support🤘🤘🤘🤘
Would love to see that rca conversion. Thanks for the videos!
That video should be coming in the next few weeks. I will be explaining how I did the RCA conversion to my machine. Keep in mind this WILL void your factory warranty. So it may not be for everybody. I couldn't find any videos explaining how to do it or what not so I just took the risk and I love it! Thanks again for watching!
@@ArtSomething Where's the video!? Need it asap! Thank you!
+1 yes pleeease:)
I want to see that Hawk pen conversion to RCA. Nice video bro
Yes I am sooo sorry about delaying that. I will prolly make a short video just to get that info out there for you guys. I didnt get video of me doing it but I think I should be able to explain it and show a couple of pics that should be enough to get idea across. THank you again for the reminder to make that video sooner then latter. 👍👍👍
Art-Something thanks for the reply. I’ll be waiting
Yup, thats really interesting question
Me too
me three
Hey Dave... Finally got 2 of these from Amazon "they were out of stock for a long while"...I used them last night on a tattoo that took 4 hours. Ummmm it had 81% charge left when I was done "WTF????" lol!! I was using the CNC-Q2 "The Pill"
Yeah its crazy how long they will last. I was surprised as well! Glad to hear your enjoying them! 🤘🤘
Thanks for the quick review on this power supply, was trying to decide weather to or not, but 30$ you can't go wrong!
I just got this can’t wait to use it on my next tattoo.
Thanks for the awesome videos 👍🏻👍🏻
I have one of those, and just bought a new one which is a bit different and not angled like those. Thnx for the video.
No problem 👍
I think the next step would be a fully built in power supply in the tattoo machine. So it’s all one unit.
Just watched a few of your videos, and had to subscribe. Thanks for all of knowledge you're throwing at us.
No problem!! 👍👍 I'm happy to hear the videos are helping you all out and thank you I appreciate the support man!! 🤘🤘
I know I'm pretty randomly asking but does anybody know of a good website to stream newly released series online ?
@Ian Moshe Flixportal :P
@Thiago Francisco thank you, I went there and it seems like they got a lot of movies there :) Appreciate it !
@Ian Moshe glad I could help :D
I have 3 I think they are great for shading
Yeah I love them for everything but that's just me!! 🤘
Just started watching your channel absolutely brilliant keep up the great work pall
I second the RCA conversion vid!!!
Im definitely diggin your content bro it's very easy explained. I'm definitely got get it
That's awesome king glad to hear your enjoying the content!!🤘🤘
Can u please make that conversion video to RCA by the way I love your videos keep up the great work
Damn Yeah I really need to make that video. Wow thank you for the reminder I will really try hard to get that quick video out for you guys.
Interesting
Yeah it’s pretty cool. Kinda nice not to have wires or any restrictions. Thanks again for watching man appreciate you🤘
I want with a w z p b wireless tattoo pain and that very same power supplies which comes with a case in all of the stuff to start 😁
10 months later - still holding up? Any battery degradation? Thanks for all the amazing videos!
Great little power supply I've owned one for a few months now and have actually used it . Not what I would use working in a street shop but for just noodleling around it's cool. Truth be told I'm a coil man and pen machines are still a novelty.
Can't stay stuck in the stone age forever bud
i was sceptical about these, but thought i would get one or two after watching this, well they must be good as i cant even seem to get one on amazon, well not this exact type anyway, they are also so much more expensive in the UK
In Canada that very same power supplies is going for under $8
Pulsations found in cheep China batteries cause the motor to fail prematurely. They can display actual voltage. But micro drops are not detected by volt meter. That’s the issue.. Les expensive battery doesn’t turn off even when not in use. So basically it will not store energy. No safety fuse either. Consider it’s not just about the voltage. It’s the amount of amps that translate to amount of watts your motor maxes out on.
This was really helpful! Thanks
Glad it was helpful Ive!! And thanks for watching!! 🤘🤘🤘
Love the videos thanks for all the great info. Could you please do a conversion video to rca???!!!!
Interesting video thanks
Id like to see reviews of other models because only thing that hold me back from this one is shape. Im afraid it may pull my machine.
It feels like another small revolution in tatoo equipment.
Once these die, give up or quite I will certainly try a different brand and when I do I will share my experiences with everyone. I will say that you really dont feel the weight of this on your machine. Its really light weight and feels lighter then having a cable hanging off the machine.
@@ArtSomething I have the hard life battery pack. If I'm being honest, I haven't been unimpressed with their performance. They do seem to have a lag and communication for power, shutting down often unless I turn the machine on before I insert my cartridges. This means I have to stop, unwrap everything, and find a USB plug to reset it so it will run again.
Also, they don't work so well all the time on other types of machines. For example, when I use my Xion they seem to have moments where the power becomes interrupted and causes the machine to basically stop and go. Now, this could be due to the fact that the connector for the battery pack is intended to go with the hard life Gambler or Omni. When I use the battery on my hard life rotary The Gambler I don't have any issues at all with the power supply disconnecting or having interruptions in the power. I do easily get 6 hours of work out of these batteries, which means I can do a 10 or 12 hour day if I want to.
I think the problem with the Xion lies only in the fact that, like Cheyenne, each of these companies is creating something that will be proprietary mostly to their machines. However, unlike Cheyenne, these batteries will work on other brands of machines; even if only with minor issues. my friends that use the FK irons power supply and I've not had too many issues with FK iron battery have not had many complaints with their battery working improperly. Of course, they use them solely with FK irons machines. The shape of the battery won't allow for the use of it with too many other machines.
I currently have a Cheyenne Sol Nova, FK Xion and Edge X, Hard Life Gambler, Killer Bee, Stylus, Kwadron Proton MX, HM Invictus and Centri Cobra. The Hard Life battery pack works on them all except the Killer Bee. It even powered a colleagues rca converted cool machine. He bought a battery pack the next week.
Would be really interesting to watch that RCA conversion - most videos on that subject are pretty bad …
I just got the lightning bolt in the mail yesterday
Congrats man!! Hope it works great for you!! 🤘🤘
I have bought a couple to try, just have to wait on the slow boat from China as they are hard to find in the UK, there are some retailers here but at three times the price I will be patient.
That's awesome royston! 👍 I think your really going to enjoy them for sure! And yeah best to be patient then pay through the nose to have them sooner. Thanks for watching and let me know how you like them when you get the chance to try them out. 🤘
u should go to amazon dot uk they have a wearhouse in the uk when i was over there that how i could get things
@@ArtSomething I cant believe it 2 days after ordering them a UK seller popped up on the bay with stock Grrrr. I also received a package with a CNC Q5 machine in, have you tried one? I think its amazing and the internals are very similar to a machine costing considerably more.
Great review..i love mine but yours cost more ..mine is like 20bucks..maybe because i live in asia and it's a lot cheaper to ship
Edit: the moment you got the multi meter out.. i knew i have to sub🤣
Respect from the philippines🇵🇭🇵🇭🇵🇭
Dang $20 bucks not bad at all! HAHA yeah the multi meter never lies! Thanks for watching and for the sub I always appreciate the support 🤘
Would love the vid for converting to an RCA bro
Oh God I really dropped the ball on that. I will be making that video.... well possibly today just so I dont forget again. Thank you Stephen for the reminder about that again. 👍👍🤘🤘
@@ArtSomething so it's been a while can you PLEASE make it
Yes a video on this modification would be great!
Thanks Bro! You answered my question on battery life, they must be good cause there out of stock! Lol Semper Fi
I did a rca convention on a coil and got it running with a wireless power supply
Oh thats dope travis!! Super cool to hear people trying new things!!!! You will have to send me a pic of it to my IG
@daveinks.88 I would love to see it!! 🤘🤘🤘🤘
I send pictures and video of it running with the foward coil I set up just to run cartridges
I just pick this up hopefully it all works out
can be used with power supply box and foot pedal if you get rca plug
Thank you
You're welcome🤘🤘
Would you be able to make a quick little vid showing how you wrap these? I assume you’d just chuck it in a bag and tape it shut, but I’d like to see just to be safe.
Great question If you watching this video ua-cam.com/video/mDLybi5kLPU/v-deo.html it's pretty much the same only I cut the clip cord sleeve short and tape it around the power pack if that make sense. Thanks for watching blackcat much appreciated!! 🤘🤘
I just got the Jet-Pack V.3 from ezgripz.com, they're on sale for 140 bucks and they're identical to what you have. I was skeptical about ordering the cheaper version from Amazon so I went with the more costly option. I love them. I can move around the piece I'm working on, just push my tray around to where I need it but don't have to worry about clip cords or cables, it makes me feel a lot more confident and capable. I have a Big Wasp RCA cable and it is 2.47oz., so actually a touch heavier than the wireless power supply. Plus being able to wrap your entire machine and power supply in one enclosed clip cord cover makes things extremely clean and simple.
Hell yeah man!! 🤘 That's awesome and exactly how I feel about the freedom from the cord, foot pedal and power supply.... I don't think I will ever be going back to a cable lol. And thanks for letting me know about the jet-Pack v3, because when these cheap ones die I'll be ordering those for sure! And thanks for watching, appreciate the support.
One of my V3's went out around 80 days of use 😔 good luck with yours!
It works great . With normal power supply there is to much hustle to haw the constant tension , a good PSU, pedal , cabel etc . With wirless battery is better , constant voltage . The only 2 drawbacks I see is that the voltage has limitations and since is a bit heavy it will haw a bad effect when you do big tattoos 4 - 5 hours or even longer . Other than that I will definityl only use this . I also recommand getting 1 and test it out first .
Did you ever have any problems charging it?
2 years later - still holding up?
I used that batt on my coil machine works great. But for my other pen machine it turns off. First one I order it jus stop. But for the coil I love that batt
Tnx bro
Great video! I recently subscribed; first and foremost thank you for sharing your knowledge with us. I received a Dragonhawk Mast rotary pen and would like to know if this power supply will work with this particular machine. Thank you in advance; keep up the great work!!! 🤘🏼🤘🏼🤘🏼
No problem and Thanks for the support Danny!! I'm not familiar with all the different machines and what not. But these power supplies and others like it usually come with either an RCA hook up or a DC hook up. So you want to check your machine to determine if it has an RCA or DC hook up, then you purchase the one that fits the machine you have. I hope this makes sense and thanks again for supporting the channel! 🤘🤘
I love the name of the product. Was it for tattooing? I didn't catch that 😉
LOL 🤘🤘
Wheres the conversion video?
It is actually $15 (if you know where to buy it)
Thats awesome to hear you found it at a better price!! Good Work!! 🤘🤘👍👍🤘🤘
Where can I buy this for that much? The ones I’ve seen on amazon go up to 40$+
I got 5 of them bought from diffetent places.i you tattoing for long time then you know difference they even work even close to actuall main power supply voltage is way too unstable and you end up damging skin badly.
@@DeadboiG59 Sorry Luis seems they have gone up in price since making this vid.
Would you be so kind as to guide me to this place? (Amazon.com doesn't ship to my country.)
I got 5 of them bought from diffetent places.i you tattoing for long time then you know difference they even work even close to actuall main power supply voltage is way too unstable and you end up damaging skin badly.it takes so long to pack color in with them too.
I don’t know I just really like them. I’m sure many people don’t care for them but for me and for now I really like them. But thank you for sharing your experience with these types of power supplies👍👍
@@ArtSomething No worries mate.i myself relized once i set up both battery pack and main power supply togather.with main power supply shading was coming very smooth and easy and with these battery packs it bit hard was taking very long.lining was ok.color packing was even harder.i this it has to do something power supply is very unstable.i ordered many from different websites all had same issue.cheers.
Is that hawk pen to RCA conversion vid there already
Any idea why it won’t charge?
I got one
I would relay like to see the video on how to convert the Cheyenne 3.5 mm jack to RCA connection! :o
Look up Stacey Dickson Sol Nova RCA or Iron Blood Cheyenne RCA in the search tab. Or, wait for his video. I love these videos and value the insight given.
Did I miss the link?
I picked up the same version from Amazon. pretty much for the same reason unfortunately, mypack was defective :( it would not stay running. it would power off after running for a minute or two but I still wanted to give these a shot. so did a little research & I picked up a jetpack v2 wireless battery pack from ezgrips.com I got it for about 60 bucks on a flash sale it came in pretty quick I've been using it pretty regularly for a couple of months now on my axys machine's along with my musotoku in the mix just because I love that thing LOL... Anyways pretty much like you I have been pleasantly surprised by the power & consistency they put out and let's face it..... it is quite liberating not being attached to that RCA cord 😁 so I'm on board if you haven't already, I would definitely recommend checking out the jetpack wireless supplies from boneface at ezgrip.com there is a few different options as far as witch generation / version or style.... he also has the v2 wireless that I use and another generation sold individual or as a 2pack comes with USB c charge cable I just use my usb old cube from my old cell phone and they have the quick charge built in it'll take less than a hour to the charge from 10% to 100% and they last. They say 4-6 hrs run time. but again all depending on what you're running and what voltage etc I have ran my axys Valhalla between 7.5-9v and got a good 7+ hrs and still had a good 25% . So yeah I'm happy so far especially with all the different options there are now ranging from 30 to way more. I'm sponsored by hardlife and the nucleus which is a wireless power supply they say is 300 to alone ...& Much as I stand behind my sponsors then everything they've done so far this has been a much more economic way to try and use this new wireless fun :) sry so long of a comment half using talk and text while multi tasking. Anyway dope vid my friend stay safe and check out what my dude boneface at www.ezgrip.com has or check out hardlife 🙏🤙🏻🤙🏻. #lostsoul #wirelessfreedom #hardcoretattoobuffalony
Mine just arrived, it doesn't turn on, I put it on charge and nothing shows up anyone had this issue?
Coming from 25 years of using cords and pedals..how has the adjustment/transition been to having a machine that is running constantly? This has been the main concern that has kept me away from the wireless revolution up to this point. I love the idea of freedom of movement and a cleaner work area but the idea of having a machine that is constantly running or having to push a button to turn the machine off every time I dip or pause to look at references etc.. I just don't know if I could get used it. I also wonder what impact the constant running has on the motor life of these machines. I'm really interested in hearing everyone's thoughts about this.
I thought the same thing only been using a wireless pen for a month now from switching from coil. Was giving me anxiety constantly having it running at first but now I’m used to it and well worth the switch
These machines are being designed for this specific purpose brand like fk irons you wont have problem with at all.
What tattoo machine do you use and what is better for you to use on doing tattoos
hey homie I'm looking for a battery for my FYT pen but cant find any can I make one fit it or no just wondering if you know if not all good my man keep inking much love up in Canada
Hi.. is it the power same powerful as the regular psu ? And it’s that more convenient or no ? Thanks
Just wondering. Are you dipping the cartridge on the ink while machine is running, or you pause it.?
Yes I keep the machine running and dip just the tip of the needle into the ink. Hope this helps. Thanks for watching. If you have any other questions let me know.
Will it work for the dragonhawk pen machine?
They make the wireless power supply in either RCA or DC connection. So I would check your machine to see what kind of connection it has. I hope this answers your question. Thanks for watching 🤘
I got 2 1 did not work ! I the other one I took it apart to check and the people who made this did not connect the 2 wires !
where is the link?
These cheap Chinese power packs may ruin the RCA connection on xion pens. My machine now cuts out after I found my battery pack getting kind of loose and I,ve been trying to figure out the bad connection issue ever since.
can you put the link of this battery?
It should be in the description of the video.
I wanna where you buy your tattoo wireless gun and what’s the best one for a beginner to buy ?
Here is the link to the machine I am currently using and the video explaining why I bought it. I still use it and enjoy the machine. ua-cam.com/video/DoGBoJiDDjs/v-deo.html Hope this helps and thanks for watching!! 🤘🤘
Lol In my country they selling it 4 times the price you bought it
Hey man I was wondering how they are holding up to date? Thanks
They are holding up fantastically so far!! I will certainly let everyone know if/when they fail or start to fail. Thanks for the question Anthony and appreciate the support!!
@@ArtSomething thanks again for the review I'm always skeptical to buy so quickly from Amazon, anyway just ordered 2 so I cant wait. Thank you
Is there any way to connect this battery to the cheyenne hawk pen without converting it like how you did in the video?? Are there any other batteries for going wireless that fit the cheyennne ??
Are these still available on Amazon?
I wanna try it out but couldn't find the link?
I have 2 of those your lucky to get an hour and a half out of them and the DC connection is to small
OH damn that really sucks, sorry to hear that badfish. I had the RCA version, I gave them away in the giveaway but they performed awesome for me and lasted hours. Seems like the quality assurance is lacking.
@@ArtSomething the only thing I like about them is they go down to 4 volts
@@BOATINDOCTOR have they got the battery display on the unit? So you know what % you at while working
@@realtalk9195 yes they do
I have 5 different kinds of them I am going to do a video comparison of all of them
Please. Make the video how to transform the cheyenne in rca :) thanks for the video
will the wireless power work on a Rotary Tattoo Machine Aluminum Alloy Shader Liner Motor Gun Needle RCA Cord Kits
I use this power pack on a rotary tattoo machine. This should work with any machine that has and RCA connection. OR a DC connectioin as they offer these packs in either RCA or DC. SO check your machine and make sure its either RCA or DC and you should be good!!👍👍
Have you had a problem with the battery not holding a charge when not in use ?
Yes I have heard that a little bit but once charged to 100% by the time I use it it might be at like 95% so I have noticed a little but not enough to bother me.
I find it funny, there's always at least one hater on most youtube videos. WHO IS THIS MYSTERY HATER?
HAHAHA yeah you always have to account for the 10% of people out there that just want to hate everything. We take them with a grain
of salt. I appreciate you watching Keith!! 🤘🤘
Prob some infamous tattoo artist that hates that he's sharing tattoo how to's. You know the ones that call ppl scratchers but I'm sure they didn't start tattooing with sharpened bones and what not. Just typical haters in the tattoo industry. What other profession has ppl hating on someone trying to earn on their own?
Hey my Dude. Have you ever tried some of the other wireless options like the Rocket mini? Whereas they might have a more balanced feel with a pen type machine. But it looks like most are extremely limited on the voltage selection. I was wondering what are your thoughts on that before I try to buy something.
This is the only battery pack I have ever used. I will say that the weight of the battery doesnt bother me at all. I have been using these power supplies for a while now and havent had any problems with them. If these die on me or have a problem I will certainly let everyone know and if they do die I will try a new brand and see how that works, but so far so good.
I've never ordered from Amazon.. is it worth it?
Amazon has great customer service. I’ve ordered from them ATLEAST 100 times
how many hours does it last?
The battery will last for about 3 to 4 hours maybe longer it just depends on what voltage your are running at. but it charges in about an hour so if you have two of them you should always have one ready to go if one dies on you. And thank you for watching please let me know if you have any other questions!
Do you have a link for your rotary pen?
I don’t have a link for that machine but I do have a link for the machine I’ve been using recently. I have a review of it on the channel as well. It’s the CNC Q2. Hope this helps and thanks for watching!! 🤘
can you use this on a this on a rotary that is not a pen?
Yes you can as long as it have an RCA or DC connection, Just check your machine to ensure which one you have and then make sure you order the one that matches your machine either RCA or DC.
You think that would work with the dragonfly also or just those pen machines? I’m still learning and sometimes I just hate the cord so much 😂
Oh, and I had it modified so I can use cartridge needles..
The wireless power supplies work with most machines as long as they have the same connections. So if your machine takes an RCA cable you want to ensure that the wireless power supply also is compatible with RCA. If you have a machine with a DC hook up do you wanna ensure your wireless power supply has a DC hook up. Hope this helps🤘🤘
Ok, I'll keep that in mind, thanks! 😊
Wow, I bought it but it doesn’t fit my dragonhawk wish I had a way to tell
Fits my dragon hawk mask
@@poohdiddy5326 I got a atom they don’t fit on atoms
@@DeucePlayz when ever you get a chance to upgrade to the mast tour or better it should fit
@@poohdiddy5326 do you use the mast tour ? If so is it any good ? My partner said it’s not as strong
@@DeucePlayz honestly this is my first machine, so I can’t compare it to nothing else. I jus started practicing, I’m going to eventually upgrade too. Bt I feel like it good for the price
Do u really think that can replace the foot-Adele’s and all that wires and would u recommend getting one
I can only speak for myself when I say I prefer running wireless and the freedom of movement. the power and consistency seems stable. That’s not to say you couldn’t get a dud product that just doesn’t work. So I’m not saying it’s better I just prefer it.
@@ArtSomething hey dude are the still performing well?
Is this compatible with the dragonhawk mast tour machine?
It should be. THey sell them in either DC or RCA connection. So check witch type your dragon hawk takes and buy the power supply that matches it. 👍👍
@@ArtSomething What is the difference between DC & RCA ? I’ve been using coil machines as a beginner and want to try out a rotary but need a bit understanding of this any help ?
Great Content btw !
Whats the link?
I dont think this particular one is still around at least not for 30 dollars. I have some links to some other wireless power supplies in the description of the video that may help you out.
@@ArtSomething oh ok thank you
From the link, I can’t find the option to order RCA for this batter pack.. it only has RC... what am I missing lol
Wait it says color :DC... are they just all rca ?
There are machines with DC connections and with RCA connections. If your machine uses RCA then you will want to buy an RCA power supply or vise versa. there should be an option of either DC or RCA.
Yeah I’m looking to the the CNC q2 ... so I wanted to try this power supply but I can’t find the option for rca ... could it be they’re
Sold out or discontinued?
Thanks for replying back so quickly too
@@furrrankkk3980 The RCA version was sold out, They were back in stock a few days ago.
I wont be using a wireless battery pack until I can afford the critical battery pack. My machines deserve better
That makes a lot of sense and I totally understand that logic. I am looking forward to hopefully upgrading to the Critical as well or switching machines to the Spectra Flux.
@@ArtSomething I ordered a machine from painful pleasures 2 weeks ago and I'm starting to panic? Are your packages being delayed as well?
Hey Dave, a few years ago I was deemed unable to work because of some neuro and musculoskeletal disorders. I started drawing and tattooing. I switched over to the mast tour max and cnc q2 tattoo pens with wireless as these are easier for me to handle. My question for you is this....I'm going to do a flower and vine tattoo on my wife. I'm wanting the flowers on alternating sides to look as though the are raised up off the skin. How do I shade underneath the flower to get this effect?
I feel you I'm suffering from a tbi started drawing and now I'm tattooing lol
Just curious if you've ever tried the Jetpack Wireless branded ones that look and operate exactly like these? I was going to purchase from Amazon but I read somewhere that these cheap batteries have been blowing up
I have not tried jetpack. If these battery packs I have go bad or god forbid blow up.....( I haven't heard of this but anything is possible.) then I will more than likely go with the jetpack. Thanks for watching Legendary I appreciate it!! 🤘🤘
@@ArtSomething thanks for making these videos 🤙 Im planning on picking one of these up soon. One of my 2 jetpack batteries stopped working under 90 days of use. Luckily I got it on sale but it still came out to $50.
Is there any other power supplies that you have tried that are wireless that you have tried and that your would recommend I have the Mast Tour tattoo pen and it is rated by the manufacturer to not be ran above 8v and that the motor will burn out faster if I do and in that You said when you turn it on it starts at full power and then it slows down, if I were to get this one is there anyway that you could check if I turn it on and it’s not on the gun how if I then wait a minute to connect to the gun that it won’t jump to full power and then start at full voltage and then slow down so that I wouldn’t have to worry about it going over the rated voltage and burning out my power supply
Sorry John I havent tried any other wireless power supplies. I do understand your concern and I honestly dont have a good answer. While I don't think it should really hurt your machine, I also don't want to be the cause of your machine failing on you. Maybe someone who has used a different wireless power supply will see your comment and possibly be able to recommend something for you. Thanks for supporting the channel though John I appreciate it!! 🤘🤘
Art-Something ya no problem man I really like how your willing to help out others that are trying to get into the trade and don’t really have the means to just go and pay for an apprenticeship or something and your willing to give some advice it’s really cool and appreciated thanks
I don’t think that’s healthy for a machine to start at 10-12 volts especially if my machine max volts is 8 or 9…. I wish it didn’t have that jump start.
Are you still using this and is it holding up?
Yep I use it every day. Hell I just finished a tattoo five min ago with it. I cant speak for every one of them, all I can say as that the two I ordered are working great!! Hope this helps and Thanks for watching!! 🤘🤘🤘
Art-Something You’re a legend for the quick reply just want to head and bought one used your link hopefully it works out well and if it does I’m gonna order a second one any recommendations for a lightweight rotary
@@IrishArmy Thats awesome to hear Man I really hope it works out great for you. I always get a little nervous when I suggest things. Cause you never know when someone might get a dud. SO again hope it works great for you.!! I really like the CNC Q2, I have used almost every day since getting it and havent had any problems with it yet. THanks again man I really appreciate good people like yourself!!🤘🤘
Just an update, I have received my batteries and can confirm that they are very good, I'm pleasantly confused I had one running from fully charged at 8.1volts and it only went down to 76%.
Thats awesome to hear Royston!! 👍👍 I'm very happy with mine as well and surprised at how long they will last and how quick they charge. Glad your enjoying them 🤘🤘
Hi.. how to check the battery meter btw ? Thanks
Has it fuc*ed up since the making of this video?
Nope not yet my fingers are crossed lol. Thanks for asking Chris. 🤘🤘
@@ArtSomething good deal, gonna check it out! Best tattoo UA-camr in my opinion. I watch them all, but only subscribed to 1. You sir, stay exceptional
Check out jetpack wireless .com there the same but originals
Thanks for the info on that 👍 I’ll have to check them out.
Art-Something you should buy one and open it to see if all that they are changing is the name.
I’m a beginning tattoo artist and I’m wonder which one would u recommend the wireless power supply or the Bronc power supply?
Personally after using both I would say buy 2 wireless power supplys. I personally love being wireless these days. Thanks Mathew! 🤘🤘
I need to know if some one try it with an inkjecta flite nano , couple of months ago I try the conventional that doesn’t have a screen just a little leds light and my machine and my friends inkjectas works horrible have a really increase and decrease voltage ranges
Oh damn that sucks to hear man. I havent tried it with the inkjecta. I hope someone here can help guide you to the right equipment. Thanks for watching richard appreciate it!! 🤘🤘
Thanks bro yeah I really want to try one of theses wireless batteries but I have that problem with my machine I hope some one can help me haha but great videos man, new subscriber here from Colombia
yuup those wireless power boxes are about as generic as ur music choice for this youtube video hah
What do I charge the battery with?
Is this battery pack compatible with a Cheyenne Sol Nova tattoo pen
Cheyenne uses a 3.5mm jack. At least thats how my Cheyenne hawk pen is. So these power supplies can be ordered in either
an RCA connection or a DC connection but not it a 3.5mm connection. So in order to run these power supplies you would need
to convert your machine to take use an RCA or DC connection. This will however void your warranty with Cheyenne. I hope this answered your question Kristal and thank you for watching!! 🤘🤘
Art-Something do you have any recommendations as to where I should order a battery pack for Cheyenne sol Nova?
Kristal Trinidad Aliexpress