Відео

Thank you for your order Ruaridh 🙏 ☺️

Wee bit of heat on it and it will come loose again 💙

Fair comment 🧤 😳 they're so commonplace with #Plumbers I've missed actually putting them on and showing them here

Fair comment 🧤 😳 they're so commonplace with #Plumbers I've missed actually putting them on and showing them here

@@macdonaldplumbingheatingsupply no worries thanks for replying, have a Good one

You too... you should buy a box to see what they look like 🤣🧤♥️

You'll have leaks fer miles loon. You hiv tae deburr yer pipes min 🤣

@@macdonaldplumbingheatingsupply naww am gud

Traps and waste fittings pack??

@@macdonaldplumbingheatingsupply yes and a few p’s, s’s and u’s. A good kit for the van. Basic stuff

Will have a look and see what we can build

FREE stuff for Plumberr Big Leo ♥️

Thank you 😊

Plumbing gloves if I had to guess

Latex Free gloves 🖤

Latex Free gloves...Good long lasting ones 🖤

@@macdonaldplumbingheatingsupply preety cool most my gloves fall apart after a few days of work

This is the only model we do 🙂

I've just looked at DP50... Bulldog don't do a version of that but I'm certain you'd be pleased with this one.. And as always, we are no quibble. If its not what you'd expect we will accept a return ♥️

We do love a Unicorn order 🦄... FREE Money, nae so much 🙂

Wow... that's a new one on us 🫨

Aye but you cant beat a good Folding Bucket !! 🪣

My advice... just do it ♥️♥️

Yes... a few people have sent me that tip Evangelos ♥️ I don't have any idea what I am doing 😳

Need to get Subtitles added 😂

We were a wee bit more careful than that 🙂♥️The old ways are the best 🤣

Hi 🙂 These are the current deals... www.macdonaldplumbingsupplies.com/search/consumables-c9/tool-bags-organisers-c832/regr

We don't advocate cutting them like this but did this to demonstrate they will empty 🙂 Left plenty time between emptying & then cutting. By removing the pin, these cylinders can be marked empty & then safely recycled ♻rather than the current method of leaving these with the pins in & the issues that come with that No MacDonalds were harmed in this experiment 😍

We sat it in a sink of warm water for about 20 mins after emptying it - It didn't fill but I would say it got around 75% full of warm water. We them allowed that to empty before cutting! Is that enough to clear it? I probably should have let it sit longer! 🙂 Thank you for your advice... It is needed as you can see. 🤣

Pure Scottish ♥

Thank you from Scotland ❤ Let us know if you need one sent across the Atlantic 🙂

This is why we are promoting this Allen Key allowing installers to fully empty the canisters Grinding it open was just demonstrate that they are easily emptied making them fully recyclable ♻️🙂

Thank you Alexander. I would say very few of these are recycled properly! Installers don't really know know how to but with this simple wee key, they can safely dispose/recycle ♻️ Thank you for watching and commenting ❤

I am Scottish to!! Imagine wasting a full bottle...heartbroken 💔

I think you're supposed to do that after you use the gas

@@sergiopinto6356 I know!!! What a waste 😕

Thank for your help and advice in doing this Mr Haynes ♥️ No MacDonalds were harmed in the making of this video 🤣

Thanks Russell. Great product... Saves.. Time ✅️ Energy waste ✅️ Flood damage✅️ What's not to ♥️

In a Plumbers Merchant to!! What an embarrassment 😂 Not the most polished performance ❤

The bottles have a click closing point to the lid. If you keep it closed it wont dry up 🙂

Once cured you will need to gently apply heat to re-open the threads 🙂 It can be done!

Big Jamie is a top man John 🙂

Hi Ricky... link here www.macdonaldplumbingsupplies.com/clips-fixings-c735/screws-c752/todays-tools-15ml-screwgrab-tube-sg-p15698 Thank you 🙂♥️

Definitely not to be spilled on carpet. Just needs a tiny amount on 1st and third thread to seal. Less is more

Thank You !!

Wee bit less to carry/store on the van 🙂

Hi...Leave around ten mins to set & you can put water through the join. After 24hrs it will hold up to 700Bar 😯. Very important the threads are new & clean. Old, pre used threads are less suitable as you can never get them properly clean. If you need any help get in touch 😊

I've used it on leaking trv head,sealed in seconds ,so it's good to leave for 10mins but it does work instantly.

@@deadbydawno Its brilliant stuff... We recommend only use on clean, new threads but if it works for you then brilliant! 😍

Brilliant... Please let us know how you get on with it!

Had to use tape in the end. Urgent need and that was all they had. Job done but thanks for the tip, will look out for the liquid.

@@williamlawrenson8345 thats a shame - Next time you are doing some work give us a shout ahead of time & we will get you sorted out 😍

Handy for Vessels in awkward places 🙂

Great video and well presented! I’ll be heading to MacDonald Plumbing because of Jamie’s other recommendations now. Well well well a boy from Glendale on the big screen :)

Big Jamie won't steer you wrong 💙

We sell many types of slices & its a very subjective issue! This year, Pitbull Quick-Cut has outsold everything else. Monument are also excellent!!

Code TTOC at www.macdonaldplumbingsupplies.com and add Promo Code TELE12 before this Thursday!!! (On order over £50+Vat for a wee surprise!!

knipex