Відео

Wohl wahr,groessten Respekt vor jedem F104 Piloten.

..long time ago..but yeah,was only velcro..batts moved of course on hard crashes..you may glue some batt trays onto the hull-good luck on the lucas...not really made for top speeds,needs serious reenforcement...my hull was completely filled with half expanding 2k foam.Yeah,the gambler is top..still running it once or twice a year.

Cool. Yeah, very thin, scary thin haha. I will only run 4s and maybe some small 5s batteries without reinforcement and actual straps. I've seen some guys cut the entire tub out and reinforce with inlay, but lots of work for that. Catch you later - take care. @@Rolinx212

@@OTWRCYoure right;best on 5 s up to ~80km..want faster,you`ll lose its rail-like cornering abilities-cheers!

Hehe,glad you like..next up will be Fjordlands/Nzl...probably the most impressive part of the southern island.Happy real boating i wish...have to do dry exercising here.

@@Rolinx212 Yes for sure, Fiordland and Milford Sounds be spectacular. Must be cold where you are 🌞

Nah,not too cold,was at the pond last week for an hour or so..nothing special...kinda breezy. Yeah,Milford Sounds..saw some real stuff of this place-epic!Mount Cook and M.S. for the win.

@@Rolinx212 That's good to hear,I thought be frozen over there.Nice areas but Sandflies near fly away with you

It`s that more unspectacular region where I´m living..3 km nearby that airport.

@@Rolinx212 It looks not so bad,better view than from my apartment window 😊👍

Nah,advantage is to have some lakes around...other than that-boring. Wellington airport has made some progress..have to check it soon again.

@@Rolinx212 oh no sorry to hear that 😊. Wellington airport are they building Makes yes important,I'm back home to Nelson NZ in Sunday to the river 5 mins from home can't wait to thrash my Blackjack 42 I just got and another 55" hull with SSS 5684 1200kv 6 pole motor

BJ 42 is a huge one,needs some tweaking but should be a good skater to play with and lots of room inside. maybe time to find a sweet spot and throw these biggies into salt water...Nelson environment has a lot,as you know.Will tune in for having a glimpse.Mostly done on boating here...recently invested 3 grand in speed upgrades for pc,lol

Great work!Definitely deserves a closer look ...only scratched the surface on this one Big like.

@@Rolinx212 A big update will be released today, so maybe you wann check it out afterwards :) Thank you for your kind words!

Yes,try it if you are on beefy hardware...story for a lifetime meanwhile they have a bunch of steerable boats too!

@@Rolinx212 Cool 😊👍 I will get my father to show me it has that knowledge. Boat season must be coming up for you 😊. I'm having issue with parts taking a long time to get here from China,I mean takes 1 week to get from China to New Zealand but then 3 weeks to deliver

Yup,running this on pc in high res is demanding,but it is also playable on Microsoft x box.. Less hassle,but you`ll miss the modding. yeah,maybe some boating too...but i stopped further investments -somehow lost interest.

@@Rolinx212 Thanks for that information 😊👍. The boats I with you on that very expensive hobby and I'm on my second last one the addiction is near broken

Nah,i will stick with that hobby-but reduced to further optimizing..if possible. 7 boats here-enough.Enjoy your autumn over there...just came back from a flight Nelson-to the very south end of Nzl ...7-8° C live weather report Christchurch from today.

It is indeed a fast hull,but it is also painful to work on it-so narrow today,if i`d go mhz,i would prefer the larger 114,..no brainer.

@@Rolinx212 😊👍 I know what you mean painful being too narrow that's just awkward.Yes definitely 114 better.I actually was going for a micro Iceberg from MHz on 4s twin 3500kv motors but really best going bigger as it's a tricky build

​@@paulcooper7162You already have a nicely diversified fleet;too pricey going mhz over there-checking our second hand market for a bargain could be productive...if you find someone who is willing to ship NZ

@@Rolinx212 Yes definitely too pricey any MHZ boat hull would get snapped up here,never see one for sale..I could afford the micro Iceberg shipping was okay on that small,I ended up buying a 32" Arowano mono hull with self righting.Hopefully I can get my Zonda speed up a fair bit but nothing like your boat here 😊👍

@@paulcooper7162 Nice choice,and the Zonda depend on a decent set of props....saw your last clips...already pretty stable;adding some abc~ 1716-1815-1817 may help.

Thanks man,really solid hull survived several crashes at 170+

@@Rolinx212 yes where is it bought the Holl 🙂

​@@kevinsimonsen2190you can buy it directly from dy motorshop in taiwan without electronics and go with your own setup,like i did

@@Rolinx212 okay thanks for the info 🙂

Thanks,definitely not mothers prettiest gal..but solid performer.

These were the uplands located only about 100 km from the place i`m living.Mining towns,unesco world heritage area..some beautiful rural roads for biking..mostly nature conservation area though.Nowadays often visit this place for filming and photography.

@@Rolinx212 sounds like a decent place to visit seriously I guess you get that when history goes back a long way. New ZealandOnly existed from about 1890s not much

Thanks Paul,looking forward to your next hot offering.

@@Rolinx212 Thanks very much😊👍..as you already know it's trial and error

Yeah,bearings singing La Paloma,adé.

Thanks,yes only tape so far..although a good brand and double layer, i would recommend using additional hatch screws.

@@Rolinx212 Thanks..I'm going to have to try those screws or hinges..it like having your family in the car and doors fly open..

Many thanks,was a solid run.

@@paulcooper7162 Same here Paul,no boating these days..maybe a period where these selfrighters come into play..but then-as we both like experimenting with setups- most of them will lose that feature when changing motors and batts...nah ,had one of these sonicwaste..laughable handling.

jau,mach sie gerade leichter

the mg36 is a nice beginners boat,very relaxing driving experience,hull needs reinforcement though.

@@Rolinx212 Looks real fast..I think I've now seen the vids of having to reinforce the hull..I think that's why I got the Zonda🙂

@@Rolinx212 Oh really that is good news if they strengthen the hull...Those speeds are a bit much for me and my course although I've found a really good course where it's shallow,the river meets the estuary..I think I will keep enjoying fast vids like yours and keep my Zonda a peppy speed pickup just can't afford to rip open the hull💯💥👀

to be honest,the funniest moments ,while boating,i had on a small pond/area when using an agile mono-naturally the cats are for speedrunshunting for big numbers is addictive but sometimes costly too.

@@Rolinx212 cool..I think your right I'm enjoying some of the smaller boats now ,the small rigger I just got should handle like it's on rails and 4s 3500kv EDF motor..but I received the boat crushed so disappointed

thanks man,nice beginners boat-super easy to set up and handling is foolproof.

I`m running sls-batts.

Thanks!

thanks,Hansi-siehst es ja vielleicht-das war schon so nass wie möglich abgestimmt..der fliegt den meisten Leuten schon bei 110 ab..setup ist noch das lmt/mgm;nur diesmal mit selfmade Prop.Genaues dazu poste ich hier net öffentlich..hier lesen üble Gestalten mit.Kommt auf jeden Fall ein billig china setup rein..150 reicht für die Mühle allemal.

@@Rolinx212 alles klar. Du machst das richtig gut. Ja mit lehner und mgm geht schon mächtig was weiter. Ich möchte mit billigeren Setups alles rausholen was machbar ist. Und ich spar mir etwas an Kohle.

yea,he is maybe not sad...but simply too slow-lol thanks my friend.

@@Rolinx212 haha, also likely. I see buy the way that the dislike is actually removed👍

yup,caught in the act-once our toyboat-expert removes the dislike on your last TFL- pursuit clip..he ´s on a good way to rehabilitation.

Thanks

Super Fluglage und Drehzahl hast du auch genug, Setup bitte evtl auch mit Gewichts Angabe. Roger

@@Rolinx212 Dann wünsche ich dir noch viel Spass mit dem Hobby, meine SAW Zeiten sind auch schon vorbei.

@@fast-rc-boats Danke ,irgendwann wirds halt unverhältnismäßig...dazu noch immer strengere Umweltauflagen.Werde zumindest so lange dabei bleiben.... bis man mir die Funke entreißt.

c'est sûr-merci

no idea,as you can see i`m limited -the motor mounting plate. need even more weight in front;your construction last year was far more flexible pity it never reappeared?

Wish I were able to get mine to 82!! I just could get it to stop from flipping. My boat is still on the bottom of the lake lol. Was thinking of getting a twin motor TFL Zonda Pagoni 1040mm.

if twin,I`d go mystic 84;crazy speeds possible. zonda also needs reinforcement,but that should be no problem for you.

Tough decison between building another boat, or save money for a turbine jet. Can't afford both.

whatever you do,i`ll follow the build over at rcg

cam was garmin virb ultra-inbuild telemetry ; their free software VirbEdit did the overlay

Thank you, that's awesome!!

Thanks,you will find a preconfigured tool called MeGui which uses avisynth scripts.Completely straight forward,but you`ll need a powerful pc in order to get reasonable transcoding times.Search for frame doubling interpolation.You may also check "smooth video project" svp4-it does the job on the fly-,no need to transcode,simply watch your 30 fps clips in buttery smooth 60 fps on the fly.