![Heli4213](/img/default-banner.jpg)
- 83
- 241 979
Heli4213
Приєднався 27 жов 2010
Spinner Backplate Cut 2024
Could not find any videos of drilling out a backplate for a spinner so I made one. Make sure you use Split Point Carbide Bits or you will not be happy !!!!!!!
Переглядів: 86
Відео
Harbor Freight Daytona Wheel Jack
Переглядів 3,5 тис.8 місяців тому
Using the Daytona Harbor Freight Wheel Jack
Christmas 2023 Lights
Переглядів 688 місяців тому
Cathy and I at the spur of the moment went driving around and looked at Christmas lights. It was super cold out so we were nice and toasty in the truck. We saw some really cool set ups.
Raptor 50 Final
Переглядів 19010 місяців тому
Older video of my Raptor 50. Great machine to fly and learn on.
Vario AS350 Carbon Fiber Work
Переглядів 1910 місяців тому
A small video clip on the Tail Boom Carbon Fiber Work
Florida Ocean
Переглядів 36Рік тому
This is just a sample clip of the Ocean I took and I am trying to remove the wind noise. Full video of all clips will be posted when they are finished but not for months maybe? Again, this is so Audio experts can help with this issue. Hopefully you will still enjoy how nice and relaxing the clip is. Clip is RAW with no editing yet!!
Vario Bell Jet Ranger 206 BIII May 2023
Переглядів 2,3 тис.Рік тому
All information is in the video. 14 year old Vario Bell Jet Ranger 206 BIII got a major overhaul.
Jet Ranger 2023 Engine Run
Переглядів 336Рік тому
Sending this to a Vario Helicopter Rep to make sure gear mesh sounds correct. I put new parts in including tail drive shaft, new claw couplers on both ends, tail bevel gears, tail shaft etc. Seems like no vibration now and flew it on 3 tanks with new engine also. Just wanted him to look a mesh noise as they all make noise but wanted him to check it. Thanks
Pennsylvania Jet Jam
Переглядів 1 тис.Рік тому
A nice small group of great people flying in a stunning location. Thank you to the folks that let us use this incredible facility. We thank you for your hospitality and kindness. I hope all enjoy this small video if you do leave a comment and hit the like button. THANKS AGAIN !!
Gorillas Pros Spray Booth
Переглядів 369Рік тому
Review on the Gorilla Pros Spray Booth. Click on Link to Amazon Below ua-cam.com/video/fvlo5jUrmRg/v-deo.html Order your gorilla Pros Spray Booth Now on Amazon www.amazon.com/GORILLASPRO-16-5x10x8Ft,Inflatable-Blower,Upgrade-Environment-Friendly,More/dp/B08GLYD49R/ref=mp_s_a_1_1_sspa?crid=3J1UKL0ZCNKVW&keywords=gorillaspro inflatable paint booth&qid=1666627796&qu=eyJxc2MiOiI0LjI0IiwicXNhIjoiMy4...
Miniature Aircraft Whiplash
Переглядів 1,7 тис.2 роки тому
Test flight of the Whiplash. A super-hot day wow crazy.
Vario Benzin Flight 2022 Edit
Переглядів 3532 роки тому
A small helicopter flight with my Vario Benzin for a special family. There were a lot of trees so just some basic flying around.
Bavarian Demon AXON Flybarless Unit In 4K
Переглядів 3,7 тис.3 роки тому
Bavarian Demon AXON Flybarless Unit In 4K
Titusville May 2020 Garette and Milton
Переглядів 544 роки тому
Titusville May 2020 Garette and Milton
Heli4213 ,uniquephotographyandvideo.com,
Переглядів 1056 років тому
Heli4213 ,uniquephotographyandvideo.com,
Waypoint Practice DJI Phantom 3 Professional 1920X1080 HD
Переглядів 387 років тому
Waypoint Practice DJI Phantom 3 Professional 1920X1080 HD
I've been using the potty pads for years. Nice to see someone else use them
Awesome
Well they say always add Greece so just do
Isnt the grease going to be worthless with all the road debri and brake dust sticking to it? Seems like it would cause more harm than good. Besides that the video is extremely informative. Thanks!
That works well on hard, flat surfaces. I just use the jack to raise or lower the car until the tore is just touching the ground. When installing the wheel, I raise or lower the car as needed so that the studs are at the same height as the wheel holes when installing the wheel. Works on hard pavement or dirt or gravel but not in a swamp😀.
I just bought a pair and they do not work properly. I have 30” tall tires about 7” wide. The ratchet is in between indents when I have them adjusted under the wheel. Taking them back tomorrow.
Just wanna make sure everything's new and they're so inexpensive that's why
Why do you change the pins?
Ok thanks 👌
In this case the audio is unusable and it's better to replace the whole audio track with another seascape audio that has no wind. Cool beach though!
Awesome
I got the same one for doing exactly this, my truck wheels are heavy and @ 57 I'm tired of wrestling with them. For those wondering about size this Daytona jack will handle tires up to 11 inches wide.
I have little van wheels
won't work for wide corvette wheels !!
Would you happen to have a link. I can’t find it on there site. Thank you
www.harborfreight.com/1300-lb-capacity-self-loading-positioning-wheel-dolly-64601.html
Your reason is exactly why I need one of these. I too have a bad back and need to put on my snow / summer tires twice a year. Thank you for the recommendation
Glad it helped. I figured I was not the only guy with a super bad back who needed a solution. Glad this helped !!!!!😀😀
Why would you even bother for wheels/tires of that size? This is really for trucks and larger vehicles that actually have big heavy wheels
1/4" impact driver for lug nuts. And people dont like dewalt wtf.
That would come in handy for me when I get dispatched to do them chevy suburban tires and etc.
Now build a Trilander.... The Britten-Norman workforce kept quiet about that one and surprised the world with its arrival at the Farnborough air show. That take off whine is exactly the same as the real thing welworth all the hours you have put in to get it airborne.
Thanks. A Trilander would really be cool.
Just got me an 07 runner for the ease of dealing with mechanical stuff and this video just proved that …! How frequent do you guys find yourselves changing break pads? I read they go fast on this vehicles?
Got a 2007 with 250k. Just changed all 4 wheels for the 3rd time. No one beats a Toyota.
Thanks for this vid. A decade later and this is still the best lit and camera angled video on the 4th gen front brakes
😢
Grasias. Exelente. Vudeo
Pulled this video up because I took the spring off without paying attention to how it went on. Life saver
I'm about to do mine on my 06 4runner, very easy and smooth. thanks you Sir.
Forgot to live the pistons though
Great video 👌🏼
Thanks🙂🙂🙂🙂
Very good video brotha love the tip about the puppy pads now I’m going to use that. Thanks
Is that a harbor freight C clamp? I’m asking because that’s what I use. Lol
Will that work for 2004
Dog pads ✅
😯WOW!!!! Unbelievable save!!😁👍🏼
another pad slap video. proper way is to also either turn or replace the rotors
Great video. Thank you! Can you please post the part number for the pads ?
Dont remember sorry!!
Hehehe
Thanks for the puppy pad suggestion. I am always getting oil spots on my driveway.
Good job my friend this is to the point and beats all the other semi pro changing brakes productions 28 minutes long on uTube. Thank you!!
Thanks for making all the silly mistakes for us - no better way of avoiding a mistake than seeing someone else making it.
I have a 99 year basically the same setup good video though
Uau one like 👏👏👏🛎🛎🙂
Amazing video. Looks very simple. Any brake pads you recommend for my 05 4runner v6? Thank you.
For some reason pad in the back is a bitch to install. I had filled it a little to have it move freely.
I've made three canoes and one kayak, all strippers with fiberglass and carbon fiber cloth. Something therapeutic about process! Great video sir.
this is the same as a gx470??
That is the best displays I have seen to remove the lower clamp. You had me scared at first on the reinstall. Thanks for the information. I would like to see someone cover the measurements of the rotors to reveal if it needs replaced.
Great! Thanks!
Great clear video. Just did my rear brakes...same car. A little more complicated to change rotors and pads. When bleeding my brakes No Video I found mentioned needing to start the engine in order to be able to pump the pedal and force fluid thru the lines to bleed. Engine off= no fluid when pumping the brake. Not sure technically why but it’s probably something simp,e.
so you did now show how to compress the calipers on video like the others do.
Great job on the video! Short and intuitive, No monkeying around with talking about all the parts and what they do just straight to the point! Very clear instructions!
Glad you liked it !!!!