Відео

cool. i've even got a couple of mags i've saved from an old HDD.

Let me just go and grab my diamond coated file.

Thanks so much for this you've saved me loads of hassle! Switching the valve to setting 1 has gotten my radiators working again. Is there any disadvantage to keeping it set to 1? Why does 0 turn off the heating? Thanks

Done mine as well. Screw was the hardest part as the head was damaged. I had to remove small plate attached to vanos valve with screwdriver and hammer. Then pull out vanos, and now, after I get more access, grind this stupid screw to remove it. I used small grinder to do it, and again screwdruver and hammer. I put new vanos in, start the car and we will see if it helped. Can I drive some kilometers before I make adaptation? Will I not damage something? I have no ISTA to make adaptaion and I need to go to workshop.

Did you try and cut the whole width ? that would be more of a test and take off all protection first before the cut would like to see that. As I need to cut 2 pieces 70mm square.

Cheers Zippi! I love the end of the Video: Next problem is waiting already hahaha One ❤ for the N13

I can't afford a new driver so I'm scrambling for a solution

Ive got all the things but i caht loosen up the glue. And i risk damaging the diaphragm even more than i already have. Is there a better way of removing it wuth a different solvent than 70 percent iso

Nice video, very informative, I have a question how did you check de plugs, what are de values that should appear

I’m almost 100% sertain you creates micro cracks by filing it and using a razor. I did this and I used 2200 wet sandpaper a long way, still cracked after a week. How long did your survive? Can you melt that material???

Don’t use any kind of sandpaper wet or dry like I did, that shit doesn’t work 😂

Instructions worked like a charm, all done in 15mins, after adding some oil to the fan axle everything working like new again! Many thanks!!

Thanks.

Hey, what is the name of the song playing in the video? 🎶

I bought a pack of 5 cos i knew i was gonna fuq something up😂

Why in hell i found this video now when i have ordered thouse spectools 😐

I fixed my but steel vibrating Sometimes make laud noice but sometimes nothing I don't know if I have to change the front mouth to to be OK help

2:50 min, its not temperglass

WTH is this music 👎

Great

Hi i did this but i found it seems like the shaft is loose causing it to go sideways and touch the sides when pull up it goes to position but just falls back down again after reinstalling? Any advice? Maybe just buy a new one

Sorry, I hope you didn’t mind me saying that, I wasnt being rude I was being helpful xx

You have used the wrong utensil to get your egg out, you need to use an egg spatula I have a silicon one that I bout off Amazon for £2.50 the bottom half slides under your egg and the top half is like 2 prongs that hold the fried egg on to the spatula it's an amazing utensil xx

😍

Red and Tripoli are two different polishing compounds.

What if I don't have a diamond coated file? Is there another more readily available tool I can use, like maybe an exacto knife or razor blade?

Great choice of music, very lively and happy!

fem = "FRONT ELECTRONICS MODULE"?

Thanks for this video, i ordered a replacement dampner as my left one was torn. I had the new dampner fitted in but the exhaust is still vibrating. Are there only 2 dampners for the exhaust system? Ive heard theres another dampner towards the centre of the car?

❤😅😅

Beautiful ghost dial! You don’t see them quiet often as these are quiet rare. Got a 1603 ghost myself. Cheers.

Just ordered one mines doing the same thing thank you

I’m having a similar issue with my n13, fault reader says Vanos intake Control Error, Camshaft Jammed. The idle is very inconsistent and using a lot of oil.

What kind of psychopath just wipes off superglue with their finger??? lol

My car only cold weather mornıng tıme starts normaly. When ı move about 200 300 metter gıves fault. After ı stop to car and start agaın notıng happen all day everythınk normal untıl next mornıng. I went to spacıal servıs they saıd vanos what you thınk ?

May never stick but so slow

My eggs stuck

Really nice music in this video

Undiluted acrylic paint is not water based.It's synthetic resin based paint.

Hi thanks for the video i have the same jigsaw the previous repair man did eliminate the dimmer bord and cut the cable can you tell me where was the cable connect to ? The white and red and the black cable on the dimmer bord ? Thank for the video it help

Will a box cutter work? Bout to find out rn

Thank you for sharing this process which will save many of us money 🎉 and thanks for including the errors and tips. 💐💐💐

Bro what do you think,how long would it last if i prepare it only with acetone,apply acrylic paint and not apply finisher? (For synthetic leather)

Please, where is paddle shifters fuse? My paddle are malfunctioning, minus is shifting up sometimes, can it be even problem with fuse? Thx a lot

8.5 (8.35 would be better) inch brass tube flaired out slightly with a screwdriver works too. i first push small with my fingers all the way around then stick into the pipe. ill definatly use electrical tape first next time, it looks like it works very well

Where did you buy new ones from, eBay?

Hi , thanks for movie , have glass telefone but i need cart size in monitor metal detector 😉. Have Diamont bit dremel i check . Sub and like aprroved😊

Why use coconut oil?

How do you put it back on? Seems like it would be very tricky without damaging the case or lugs

Have you tried buying a new rear window arm for 5 bucks?