Відео

M/N 14ACX-059-230-06 S/N 1918L19799 please can you tell me how many tons

Thanks please I can't figure out the size of my a/c Model# vsx140481ac

Thank you for great explanation! It helped mea lot!👍

what is the best brand for AC capacitor

In this example, if the air handler was located at either end of the ductwork would I need 26x8 or 10x20 starting duct to match the 1200cfm required for the system to operate properly?

I can’t find the chart is it still linked with this video?

This dude looked nervous as f#@k. Great instructional video though.

2TTB3042A1000AA is there any one tell me how many ton is?

My unit has both a 30 and a 24

Thanks bro

Great video. ❤❤❤

thanks ..where chart in description ?

GSZC180601CA - it has two numbers that work. Is it a 1.5 or a 5 ton? Thank you!

Amazing simple tutorial! Great job!

Thank you for the informative video. I have an older ICP unit and I need to replace the cold air return flexible duct. Unfortunately the manufacturer doesn’t follow the rule of thumb break down of the model number to inform me of the BTU or tonnage. The model number is PHF330000K00A1. Any help will be appreciated. Thank you in advance

question please: it is clear how to determine duct size WxH, How can I determine LENGTH of that size? thanks for the video!

Awesome job thank you so much. My model number has 24ABC648A310 number . So which 2 number do I use ?

Not trying to be negative here but this is why we 10 out of 10 systems have air flow problems. The design is garbage in garbage out, and the first fitting destroys all the flow and will never balance. We all need to start taking this seriously

Trash. A black speaking in ooga boogabonics and decked out with gaudy patches wouldn’t be within a mile of an assignment or role like this.

Nothing about this guide is of any value other than in the beginning when he said to do load calculations. EVERY "rule of thumb" mentioned is of no value. Also, if you don't know how much air is supposed to go to each room, which you don't without load calculations, how can you determine the correct size duct/s to route to that specific room? HINT: You can't.

I have a Carrier condenser model number 24ABB336A350 - what is the size?

My goodman ac model number is ck24-18? 🤷🏻‍♂️

❤

GSC130361GB

Thank you for the video, exactly what I was looking for getting ready to replace ducts

Does anyone know if it matters where you install the return air filter - whether at the back of the return air duct close to the furnace or at the front of it about 18 inches from the furnace?

So? Probably a totally stupid question !!! I'm designing a duct layout for a 2 ton system for my small house. The AHU will be centered with the house, I'll need (approx- 500 cfm's on one side of the house ,, and 300 for the other half,,, Would I be correct in sizing the trunk accordingly for each side? The trunk for for 300 cfm's come out to roughly 8 x 8 ( with a .07 friction rate ,,, calculated , not assumed !) Only Asking because I've searched like crazy, and this is the only video I've seen where you've split the load,, ( make's sense to me btw,,) Just want to make sure I size accordingly ,, I've searched at nauseum, and every example shows one main trunk and sizing down as needed, so, I'm a little confused with that part, Otherwise ,, its approx ,, a 8 x 20 trunk straight across ,for a 2 ton/800 cfm's unit ,, if I'm using the calculator correctly :) 🤔 thx!!!

The only way to do this is to do a load first. There is no other Way in my opinion.

Model number R4A424GKB100 how many tons will this be

Very helpful! Perfectly explained and to the point. Thank you HVAC Bee!

This numbering system was clearly setup to keep regular people from learning anything abt their condenser from the model number. Thanks for clarifying!

Why in the hell do they need to make things unnecessarily complicated just put on there 3 tons or 4 tons or whatever just be obvious about it....

Sir how to construct Round duct Pleanum box.?

Uh ok. So static pressure is irrelevant

can you tell me how many tons of my condenser unit with a model number 4TTX6042J1000AA thank you,

GPCH36041AA how many ton ?

Thank you!

I have a 42-year-old Carrier. Yes, I got my money's worth. Paper label inside the unit is long gone, just a streak of adhesive remains. Packing slip said 38CQ900-021. Keypunch card said 38VE004301. If you can decode this one it would be very much appreciated.

My model # is GPC1460H41EC and need to know tons and return grill size.

Hey Adam I’m trying to find the right tons for my AC unit model number is CHP442AKA2

Hey can you help me with my ac unit the number is GSX130361EU

I have high static pressure on a new 3.5 ton heat pump. I know for sure the flex duct is the issue. I have two 12" coming out of the supply in opposite directions. I know I need an 18" for a 3.5 ton heat pump. I did a diagram layout of the duct in the attic. What would happen if I just replace the two 12" to 18"? Ignoring the downstairs, because everything is between the walls. The problem was even worse with an undersized return. The original and only return was a 24x18. The total static pressure on the unit was .9 W.C. I was able to drop the TESP to .66 by making the return 30x24. Since there is so much static pressure and the unit TESP is a .2 and I need an 18" for a 3.5 ton for 1400 CFM. How big does the supply plenum should be and what shape? Should the supply plenum split to 3 18" going out to each of the 3 distribution boxes? Do the other three distribution boxes also need to be larger? Looking at the triangle shaped supply plenum I have very little room up for a rectangle plenum. I think a 3 feet ductboard supply plenum should work. There is a foot from the Air handler to the ceiling and I think 2 feet from the attic floor to the roof. Now I am looking at two types of designs. Design #1 keeps the 18" ducts straight by having a single 18" coming out of the supply and then a distribution box splitting it to three 18". The sides would be coming out straight to the to side boxes and one going to the third box with a slight curve. Design #2 splits to three right at the supply plenum and goes to each box individually, but all three will have a slight curve. I will not be using any metal plenums..... it will be all flex duct and ductboard boxes, because of budget. I am not trying to make a perfect system, but trying to remove the restriction from the 12" undersized ducts installed and replacing the flex duct that was patched with mastic with new ones. Another question about the installation..... I have the flex duct running up and strapped to the roof for support. Since the supply plenum is low to the floor due to the roof..... Can the flex duct be run on the attic floor? Can you tell me which layout makes more sense and less restrictive? Thank you. Layouts: Current i.ibb.co/Ld9kmPM/Flex-Duct-Layout-and-Size.jpg Option #1 i.ibb.co/GHyS00g/2022-07-05-0002.jpg Option #2 i.ibb.co/PNN8mSB/2022-07-05-0001.jpg Air Handler Specs ibb.co/17VvF4B Video of attic ua-cam.com/video/iInIN89q8GU/v-deo.html

Hi Adam I came across a little problem where two numbers are divisible by 12. The model number is. GSZ130181AD I'm confused why both numbers would be in there.

Not all super heros wear caps! Great stuff here bro. Much appreciated!!

Why did you stop making those videos, they are the most useful I've seen

how do I determine the btu of my existing window unit

I'm a mechanical engineer that is designing my own HVAC system. This video was very helpful since they don't teach us standard industry practices for duct design in college.

MODEL GSX140601KD Goodman

Surely this is a joke.