![Seekins Precision](/img/default-banner.jpg)
- 70
- 409 399
Seekins Precision
Приєднався 30 вер 2007
Official UA-cam Channel of Seekins Precision
When Glen Seekins founded Seekins Precision, it was no surprise to those who knew him well. He comes from a long line of hard-working entrepreneurs, so becoming one himself was only natural. Following The American Dream seemed to be engrained in his DNA.
Visit us at www.seekinsprecision.com and find out more about us and our products.
When Glen Seekins founded Seekins Precision, it was no surprise to those who knew him well. He comes from a long line of hard-working entrepreneurs, so becoming one himself was only natural. Following The American Dream seemed to be engrained in his DNA.
Visit us at www.seekinsprecision.com and find out more about us and our products.
Seekins Precision, Where Quality is Standard.
Seekins Precision, Where Quality is Standard.
Переглядів: 2 128
Відео
Wind Part three
Переглядів 978Рік тому
Matty Nelson, a long-range instructor, gives tips on reading the wind and adjusting accordingly in the final part of a three-part series!
Wind Part Two
Переглядів 1,2 тис.Рік тому
Matty Nelson, a long-range instructor, gives tips on reading the wind and adjusting accordingly in the second of a three-part series!
Wind Part One
Переглядів 1,8 тис.Рік тому
Matty Nelson, a long-range instructor, gives tips on reading the wind and adjusting accordingly in the first of a three-part series!
How To - WIND
Переглядів 3,6 тис.Рік тому
Shooting tips with Matty Nelson! Here he covers wind, how to read it, what to look for, and how to correct.
Seekins HAVAK Gen 2 Bolt Upgrade FAQs
Переглядів 8 тис.Рік тому
Matty Nelson runs down the specs of what features are offered by the Gen 2 HAVAK Bolt vs the original bolt style. Reach out to sales@seekinsprecision.com if you have any further questions.
Caliber and Barrel Change
Переглядів 10 тис.Рік тому
Want to change calibers on your new HIT rifle? Matty will walk you through swapping barrels and changing the bolt face.
Adjustable Mag Well
Переглядів 2,5 тис.Рік тому
Interested in trying a different mag or curious about how our setup works? In this short, Matty will walk you through adjusting our mag well.
Hit Trigger Change
Переглядів 3,9 тис.Рік тому
Listen close as Matty Nelson runs down how to change the trigger on the Havak HIT.
How to install your ATC
Переглядів 8 тис.Рік тому
Matty Nelson runs down an ATC Install. We recommend hand tight. If you have any issues, please call (208) 743-3400.
Seekins HAVAK HIT Release! (Facebook Stream)
Переглядів 15 тис.2 роки тому
The Live Stream from the Seekins Precision HAVAK HIT Precision Chassis Rifle released on November 1, 2021. Check it out on the website!: seekinsprecision.com/havak-hit.html
PH2 in the field: Cut Bank Montana
Переглядів 12 тис.3 роки тому
Recently, The Seekins team took a trip to Cut Bank, Montana, where they put the PH2 with the new bolt design into the hands of a group of guys from North40 Outfitters! Their response: They loved it! Check it out!
Seekins x Eberlestock: Meeting of the Glens
Переглядів 1,9 тис.3 роки тому
The team from Eberlestock flew up in Glen Eberle’s plane to tour the shop. This was the first time Glen Seekins and Glen Eberle had met in person, and Glen Eberle got a surprise from the Seekins team. #getafterit #getoutthere #unrivaledinnovation #seekinsprecision #308 #f4gphantomwildweasel #ygbsm #wildweasel #usaf
Seekins Precision's RVL-UBM
Переглядів 3,5 тис.3 роки тому
Allowing versatile mounting of just about any bipod on the market, the RVL-UBM from Seekins Precision is an easy-to-use, quick attach secure mounting system for anything using MLOK rail. Matty Nelson breaks it down. Get yours here: seekinsprecision.com/rvl-ubm.html
Seekins Precision MRAS/MRAC System At the Range
Переглядів 8 тис.3 роки тому
Seekins Precision MRAS/MRAC System At the Range
Seekins Precision's Low Profile Adjustable Gas Block
Переглядів 9 тис.3 роки тому
Seekins Precision's Low Profile Adjustable Gas Block
Seekins Precision's UBM (Universal Bipod Mount)
Переглядів 4,8 тис.3 роки тому
Seekins Precision's UBM (Universal Bipod Mount)
Seekins Precision's ATC (Advanced Tactical Compensator)
Переглядів 10 тис.3 роки тому
Seekins Precision's ATC (Advanced Tactical Compensator)
Seekins Precision's Enhanced Builder's Kit
Переглядів 3,8 тис.3 роки тому
Seekins Precision's Enhanced Builder's Kit
Seekins Precision Select Adjustable Gas Block at the Range
Переглядів 9 тис.3 роки тому
Seekins Precision Select Adjustable Gas Block at the Range
Get After It: A Thank you to our Veterans
Переглядів 8763 роки тому
Get After It: A Thank you to our Veterans
Get After It: A Legacy Made in the USA
Переглядів 1,2 тис.3 роки тому
Get After It: A Legacy Made in the USA
I love my havak element in 7 prc. This kind of attitude from this manufacturer is why I chose seekins. Full stop.
My havak element in 7mm prc is absolutely incredible. The price point at first was hard to stomach, worth every cent for the quality and supporting an American company and American workers.
Can i used the 1/2 x28 on my ar15 556?
Can you do the same in the havak element action?
How does the 6.5 CM do with ar10 magpul magazines? Or do you have a magazine with the rib set back for the CM case?
You guys perfected the Ar 10 platform.
Not sure I can trust someone who can’t pronounce ambidextrous
Bought one.
Bought one today. Looks like you discontinued it. To bad. I don’t want another heavy magpul. And the Luth isn’t what I would call heavy duty.
If I’m going to put a suppressor on this unit do I test it and set the gas block with suppressor installed or put it in after gas block is set?
I absolutely love my HIT Rifle and PH2 my PH2 has a BUTTER SMOOTH bolt but my HIT bolt is super catchy like it sticks constantly. My PH2 has zero problems but the HIT is the complete opposite like it is supper sticky when running the bolt. Aside from that the HIT is the best thing ive had since the first time i touched a boob.
So, the adjustment screw is not accessible thru my hand guard. Neither do I have a bullet trap (as shown in the video). Seem the only option is to remove the hand guard, go to a range, shoot in the GENERAL direction of the backstop until I get the setting correct. Then go home and reassemble the hand guard. Then go back to the range and (re)zero the rifle. Do I have this about right?
We can’t see what you are doing! Slow down! And make sure the camera can see what you are doing! I have a brand new gun and my bolt came in the fire position, I think, I’m not sure because you didn’t show us what it looked like. So what I got out of it is you need REALLY STRONG HANDS or you do something with a key chain or a boot lace. ARE YOU KIDDING ME!! $2400 and I have to use a key chain or a boot lace?
Is it essential to hit the bench with the drill bit while doing this?😂
Do they come in coke color
No
That sux u have to shoot into a container. Thank God I live in the woods
Just picked up a ph2 and in no way is it that easy to take down the bolt. I have to man handle the $&#% out of it to get it back together. My HAVAK Hits bolt is the same way. They are absolutely nasty accurate but the bolts are no where near that easy to put together. Also my HITs bolt is not smooth at all it binds when racking a new round in. I love everything about it except that. The bolt on my ph2 is butter smooth though.
Just won one at ducks unlimited need help on what kind of scope and suppressor to put on it help please
Who do you procure barrel blanks from for the current production sp-10?
What's the OD of these and what's the muzzle diameter on your current production SP10's?
Say the gas block gets carbon locked, is there anywhere on the lever that a tool or bullet tip can get in to apply additional work and leverage to get it unstuck?
Do you still make the nest FH?
Just watched the awesome video, great tips.
Hi, saw you guys at Shot Show but wasn't able to ask if you guys would make the Slam in 22 CM or at least on 6.5CM? It'd be nice to have that fluted barrel on the tactical folding chassis because It'd look sick.
Yep doesn’t work 1850 rifle and bolt won’t throw in thanks
Does gun safety apply?
Can you run a straight Gas tube on the other gas block
What gun bench/vise is he using. Can’t make out the brand on the side.
What gun bench/vise is he using. Can’t make out the brand on the side.
Question, Does the select gas block take up the exact same footprint on the barrel? (As this adjustable gas block)
I am a customer for life. Incredible customer service.
Thank you.. this seems to be the only video i can find with the un-surpressed sound. I needed that. Can anyone show it at max speed consecutive shots? How many rounds can you get off in 5 secs?
Ship to Croatia?
What is the minimum LOP on a bolt gun? Is it shorter than Magpul PRS Gen 3? Thanks
Will this action also fire 223 with a barrel swap out?
22 creedmoor barrel in the works?
Awesome Video !!!
Is this available for airsoft?
Carbon Fiber 30-06 BAR magazines?
I'm missing the sets crew up front, what size is it ?
What is the recommendation for a flush mount spartan bipod adapter? Id like to install one if i can
I don’t know how a rifle company could possibly have a better guarantee then that! You have my business
Just received my Havak PH2 in 7PRC last week. First three shot group with it was just over .75”MOA with factory ammo. I’m very confident it will shoot .5” MOA if I do my part. I’m a customer for life👍
Had my bolt shroud somehow slip into fired position on elk hunt 2 weeks ago after first shot. I had not seen this video yet and could not figure out what was going on. Luckily had a 1 shot kill on my bull, but this design feature seems to favor easier disassembly than field reliability. I would prefer the later. The only thing that is giving me second thoughts about this gun.
stripped the timing nut with a cresent wrench after getting a 7/8'' thinking it was for the nut. Don't understand why to not just use the right size instead lol
Excellent, I was wondering where the detent bearing was supposed to go.
I emailed your business Dec/Jan time frame about availability for the SP10m series builders kit and I still haven’t gotten a response! And you guys are still back ordered!!!!! I would love some transparency here?! And I assume many others building out a rifle for them selfs
Worst effing bolt assembly of all my rifles.
I own a HIT. I think the cheek rest can be improved. Looks cool but not very comfortable.
What’s the lead time on a PH2 in 7PRC? No stock on the website