![BMJAUDI](/img/default-banner.jpg)
- 5
- 7 891
BMJAUDI
Приєднався 29 лис 2011
Відео
Axial SCX10 II FREE Transmission Slop Fix
Переглядів 7 тис.5 років тому
Using paper towel to tighten up bearings in the Transmission case. This made a huge difference in all the slop of the spur gear and output shafts!
Audi A4 A6 2.8 Timing belt running with covers off
Переглядів 3605 років тому
Audi A4 A6 2.8 Timing belt running with covers off.
Another extra you can add is a bearing behind the spur gear as it only has the one on the 'box itself,I had a bearing kicking about that was a snug push fit and a proper fit on the shaft. Makes a difference to the gear alignment and also makes it a little smoother! I know they were made to a price but I'd have paid an extra couple pounds at purchase for the benefit. Also instead of stressing the plastic gearcase,thin super glue will do the job and fill the gap,a light wipe with grease or light oil on the bearing will stop it from sticking in but the glue will fill the gap nicely! Give it a go if you feel confident,I use a specialist bearing glue on bike engines that helps with slack bearing housings so a similar thing,and not everyone has a tube of bearing glue but super glue works just don't forget the grease or oil!
That’s a really great tip Derrick! Thanks for sharing that.
@@BMJAUDI no problem,I'm new to these,I've heard they're good trucks but the lack of support behind the spur was a shock! I've also got a cross RC demon,now that's a crawler! Both rugs needed some work but happy with both. And the cross demon coming in at a shade under 4kg it's a heavy rig and will go just about anywhere. Keep up the good work! Derrick.
5 years after you made this and it helped me a lot. I bought a cheap 10ii dig transmission, and this took all the slop out of the input shaft. Good stuff right here.
Thanks Carlos. Glad it helped! Happy RC’ing
This looks amazing I will do this
I'm reading the comments and your replies. Are you saying this held up for over two years and still no slop in the bearings?
Yes, It will last a long while.
Thank you for Great tips..
won't the grease eat the paper ?
There’s really no grease between the housing and bearing. Have had no issues running like this and things are still nice and tight with no slop
Thanks for your explanation, but I wish that the transmission of the crown could help me to have more force to climb rocks stronger better for my 2 speed transmission for an alxial SCX 10 2 1/10 Rc and a pinion for a 550 35T engine
Thanks for these info and tips. .🙏😊
Thanks for the good information sir also the video is well done
R u kidding me, lol that's ridiculous, I'm going to get the trx4 instead
Would aluminium foil work better? My scx10 ii kit was the same and also made a clicking noise
That could be worth a try but might be too thick! Maybe not if you buy the off brand stuff? Would hold up better than paper. Good thinking
Great tip, thanks for sharing 👍
Nice!
This pisses me off. Is the kit the same way????
I think the kit trans is different. It still may have the same slop issue though! Hopefully someone else on here can weigh in on it.
Good idea im going to to try with a plastic bag might hold up a bit better if i get it wet
Plastic bag is a great idea!
That would be too thin
Really ticks me off that we have to do this to an expensive toy, seems like Axial has dropped the ball on quality lately, getting to be the Matchbox of the RC world.
I couldn't agree with you more!!
I have experienced this issue on every single 3 gear I've owned. Vp and hot racing cases included. I have a secret that adds a 3rd bearing to the top shaft. Eliminating all slop.
Hi Great video, had exactly the same issue with my Axial crc (not that old !!) and I've done exactly the same to bearings ( same as you been a mechanic for 25yrs good trick !) I also found a spacer that fitted ( interference fit) inside the plastic housing of spur gear shaft and drilled a 5mm hole in it for shaft seems to work , time will tell 👍👍
Pretty damn smart. Might just have to do this.
JJ Keaton Thanks! It has continued to work perfectly and keep all that excess slop out of driveline.