Відео

If im not using the S282 i use 4 DE6’s and 2 slugs 😂

You drove in a Serbian like locomotive😮 that locomotive is 664 loco

a year late, i know but the valve gear is Reversed, because the eccentric rod is reversed you will probably already know this by the time i wrote this down but in case you didn't, it's that

nice to know you finally remembered the log in password to the channel

Great vid. Thnx. That's a fuel primer next to the starter. Pump several times, turn stater. Done.

Wow! Awesome train! Real tough to handle but it gets the job done. Not sure how economical it is though, I bet the environment charges are insane

Gotta leave a like for those brakes

The lubricator valve isnt there on my save. Not sure what to do because its squealing like hell

This is a REALLY long shot, but what is the background music you used? It's really nice!

I love the 0-6-0, but I am a lousy driver. Every time I hit an incline, my 0-6-0 explodes after a few minutes! Probably, because of lack of water. Something to work on. 😅😅

You didn't notice there's a bell on the boiler.

4:16 Don't shake the screen, hit alt and use mouse cursor to show whaterever you want to show.

hey I just found your channel and I bought derail valley 2 weeks ago and I enjoy your content I hope you make more cause I love it I'm going to explore your channel more but keep it up man!

F units would be awesome as DE4A and DE4B units.

30:55 rip headphone users

Great guide, many thanks!

The slug doesn't just have Concrete slabs under the hood for weight there is a lot more you missed that's under the hood that you never explained, Young Kids thinking they know all, think what you're talking about, if you have No clue don't say anything you don't need to act like you know all. I used MT-4 and MT-6 for over 19yrs by Conrail and Yeah, they have 2 Big Slabs of Concrete under the Hood BUT!!!!! they also have an Air Compressor Water Tank Sand Storage as well as Electronics reasons for the side panel on hood need a Fuse box. You wouldn't know this until now I say but what Keeps the Traction Motors on the Slug from OVERHEATING !???! What did you think keeps the Traction Motors from NOT burning up, Miss something yeah you did, Reasons why there are grates on the side of the Hood excess exhaust from the Traction Motors bleed-off. Coolant unit used to keep Traction Motors cooled off when under power which is a Big unit to super chill air into the Traction Box of Traction Motors. Plus the fact slugs need alternator power in order to use Headlights Beacons or Marker Lights as well as Sand release. Reason why the Slug Hood is Shorter than a typical Mother unit isn't because of the loss of Engine it's so the Engineer can see over the Slug when running the Slug-set from the Cab view. Mother unit is what Us Real Life railroaders call Powered Units for a Slug-Set. Yard Slugs do have More Traction Effort than Road Slugs I will say. Road Slugs travel faster as where Yard Slugs are geared down lower making speed top off at 15mph means more Traction Effort for Push Pulling. I hope this has Helped you understand Slugs better now coming from a Real Lifer

What build no. is this?

In 060 it takes 3 scoops of coal from it's own supply, but a single scoop from the 282's tender supply...

in derail valley there is no "running" position . in derail valley any locomotive that has a "non self lapping automatic brake" doesn't have "running" instead You have four positions. You have "release" "lap" "service" and "emergency". "release" means You are connecting the main reservoir to the brake pipe to release the air brakes on the entire train at which the brake pipe will be at it's normal state of 5 bar. next You have "lap" lap holds whatever bar You've got on the brake pipe so when You make a reduction on the automatic brake and You set it to "lap" it will hold that reduction and it won't change anything. "service" means taking a reduction on the automatic brake whether You want to slow down or stop the train and once You make a reduction You can then apply the automatic brake into "lap" . "emergency" unlike service however quickly dynamites the train by causing the brake pipe to go to 0 bar which causes the air to be dumped into the brake cylinders to then lock the brake shoes onto the wheels as tight as possible !!!

I hope we'll get something like the DR Class 250 or DB Class E 410, or DB Class 210 in the future.

I made it two minutes out of the station and I learned the hard way not to be to vigorous on that dynamic brake. It's currently sitting in a tunnel with a blown motor...

Dont be the guy who took 3 jobs, forgot the water, has to finish the job to pay back the insurance, and then blow a cylinder... Ill see if I go bankrupt or not...

I just got one a day ago and it became my favorite so far immediatly. I live in germany, so i often see them irl, and they are some of my favourite Trains in real life too. In derail valley, it drives way better that the 3 de2's that i drove before and i love the wood on the brakes and the lot of space that it gives for putting your map and radio and stuff down. Its definetly worth it way more than the de3 for beginners.

That "Um... *sigh*" got me.🤣🤣🤣🤣

The only train names I've been able to come up with thus far are - calling the 10 wheeler Ben. (Shout out to the 4 of you that probably understand that refrance) You don't have this engine, but I personally call my K-28 logging tank Mikado 𝘠𝘰𝘶𝘳 𝘔𝘰𝘮. Because she's ah thirsty b!tch...

Alright, so... - just buy the big hopper for Bryson coal hopper - Appalachian hardwood is going to be a daily thing of swapping out empty and full boxcar, and occasionally the coal hopper. - you might want to think about investing into an engine to live at Bryson because it's gonna eventually turn into a interchange yard for the area. I don't really have anything else. I've only made it to the Alarka proper. I only have the side contacts active there and not the Copper mine which is the main focus of there. Which could turn into an ordeal if it's anything like the Coal contact by Alarka Jct. And I haven't played it a small bit because I've been busy... and Hardspace Shipbreaker was burning my soul asunder. On an unrelated note I can not recommend that game enough, and fill comment sections with rambling like this. At the very least check out the soundtrack, because it's just more Americana tracks like what you've been using

27:00 Dynamic Brakes work by using the electricity from the traction motors which causes the traction motors to rotate in a different direction or They are slower. then the electricity goes to the "Dynamic Brake resistor banks" at this point the electricity from the traction motors is then converted into heat and They can emit a bright red glow causing resistance which causes the train to slow down which is what happens when the train Engineer Applies the dynamic Brake

Not gonna lie after using this thing I kinda want a BE6 😂

Thanks for making this steam tutorial, really cool how it all works in this shunter locomotive :)

Only thing i can really add to this episode is that - cars are counted as "spotted" as long as a wheel is in the highlighted area. -Stenzel Mfg usually will have 3 cars spotted at a time. You'll always have a boxcar of metal supply [imput] and and empty that will fill up with machine parts [output]. You sometimes have to really jam them in there to fit sometimes tho. Also Whitteir is apparently on a very slight NE (toward Ela) downward grade so make sure to tie handbrake on a bottled air consist or else you might start doing some swiching look away for a moment to deal with something elsewhere and suddenly your express train is yelling at you saying its lookin at another train, come back to Whitteir to find your 14 cars missing from the side track and have rolled halfway to Ela and smacked face first into the shiny new express engine and coaches... not speaking from experience or anything...

But the de2 is closer in performance to a track mobile

I've never Given Myself a harder Facepalm when He called the "expansion link" a "banana piece" also the only thing He forgot to mention There's a small valve called the "sander" which You can use if the locomotive experiences any wheelslip. It's in between the reverser and the regulator

After starting a new contract you have to wait like 3 days before you can upgrade your tier level Bryson has 3 new contract you can have and 2 different house tracks to worry about The Heating Oil contract is pretty easy on higher tiers because it really slow at consuming from the tank car The sawmill is going to consume more logs at higher teirs level contracts and produce more too. But you have to balance out between how much is consumed by how much Connolly creek produces. Tier 3 contracts give you a timely bonus of like 1-3 dollars for delivering cars from the interchange. But money is money When Bryson becomes available you also get to unlock the CTC controls milestone for your railroad.

If you are going downhill and not using any steam, you can let the furnace flame out to save fuel and water.

The new Diesel Electric feel is really nice. You Can now economically use Two DE2 with a Slug In-between. I keep one of the DE2s Diesel Engine off, but with TM breaker on, Works Real nice with the slug, When I need extra tractive effort, just turn the other DE2 on. The Slug has to be in-between the two. Haven't Tried it with the DE6 Yet. will try it today.

Buying the Sylva line moves the interchange to the east. All the line expansions to the west are 3 stage operations. If you continue using Whittier for the interchange, you don't have as far a distance to cover for the west expansions. I suggest you buy Sylva last.

Few things to keep in mind - the AI engineer will announce when fuel is at 20% - reputation lossed from a derailment take a while to rebuild back. - Ela bridge milestone has 3 phases. Each phase cost $750. (At >100% reputation price) - if you buy the track rights towards Sylvia your interchange is moved to the end of the line there. - the log train loads fully in 1 hr. So you can park your train in the siding and use the wait function next to the sleep.

The Bad Railroad may have gas, but does it have enough to cause medical problems?

Hey this is awesome. I was gonna see if you had any tips or advice for a dnd podcast. We're about to release the first few episodes of our own and it seems you've done this alittle longer. I am just looking for wisdom

once you hear kenosha... you know what's up

25:15 in the USA It's called the "throttle" and in the UK it's called the "regulator"

It's a 6 year old next to both a toddler and his dad.

You haven't even owned it for more than 10 minutes and you've already Kenosha-ed it into the maintenance shed...

General: "I need the harbor destroyed." Engineer: "What harbor?" (Shows general photos) General: "Holy fuck!"

Don't forget about the livestock at the farm

Welcome to Chernobyl. Come for the scenery, stay for the radiation poisoning. Sound about right?

Why do you keep running out of gas? Did you run out of beans?

I feel like you forgot to idle your rear end locomotive for the descent

"We're kicking HazMat today. We'll be fine." -RogueLeadr and Hyce.