Відео

replacing headlights on a freightliner century class making easy access to replace the light bulbs instead of having to remove the entire light. I pre drill center holes to verify the alignment trying to be on the center of those caps,. I use1/4" pilot hole and a 3 1/2" hole saw

Maxon BMR, replacing the cylinder coupling usually doesn't brake normally it's the other one on the platform side. Didn't have my camera set correctly part of it were difficult to film, also this unit didn't want to cooperate while I was disassembling it.

removing subframe from axles after doing several this is easiest way I found, I didn't show the removal of the lines since it's pretty simple

fixing S cam bushing support, realigning the cam shaft

rebuilding my prius battery here some of the things I learned from my personal experience, I'm not a rebuilder, doing a good test on every cell, discharge to 6V with a good discharger. Hope this can help many since sometime difficult to get answer from specialist. sorry for the background noise. Hope this will help you.

changing bushing on an Hendrickson suspension can be a challenge especially after many years of service, here the way I do them I rebuilt many of those suspension.

made this little stove for a friend it's my first one may need some change if I make others.

mom and dad

stacy from before bday to a little later

teresa the early days

A while back little one

to my friend hope it bring back good memories

my friend Oxy many years ago

remember these days hope you like it

quebec john bday

bowling

Drawer slide instalation jig