Відео

I do not have the car anymore, but here is what needs to be done - The green menu needs to be unlocked first via app, script or VCDS. Then if you do not have CarPlay retrofit, you just press CAR + MENU exactly at the same time. It is tricky do keep trying.This actually varies depending on MMI system version, car and etc.

@@dilzproductions not sure about that. Have you tried resetting PRAM, maybe sign out and in again.

Glad it worked. Please subscribe to my channel to support it.

@@kumarkush744 I’m happy for you that it worked. Please subscribe to the channels supported. Thank you.

@@ameerbardien7623 no. Once you are in that step just drive. I left it connected to show what it does.

I cannot be sure about that one but is very possible if it cannot read the sensor.

@@bonevchannel Hope i didnt damaged anything, it was fault it couldnt be reached

try the second command directly

@@bonevchannel I tried both. Its says neither exist

@@buna2301 No idea how to help you. What is your macos version?

actually now when I do the second one it doesn't do anything

@@bonevchannel I just updated to Sonoma 14.5 and it seems that's when it stopped working

That will be a risky attempt. Have to make sure the garage is waiting for you because once you hit 0 the car will keep driving but once you stop it you will no longer be able to start unless the error was cleared.

@@Imabaitr6 yes, I do not think the full adaptation is complete in less than 1-3 hours.

@@aravindburra7145 enjoy your trouble free copy and paste between devices. Please subscribe to the channel to support it.

@@zoltankaparthy9095 I am glad you liked it. Please subscribe to the channel to support it.

What is your battery name and capacity?

@@osmaniljazovic6201 to be honest I am not sure. Probably you might not have it at all as option in VCDS

can you rephrase the question as I do not understand it. If you are asking about the time before you can unplug it, I wait until the indicator on the front of the chip is off. That tells me the power to it was cut by the engine.

​@@bonevchannelI did everything perfectly. audi a4 150hp now around 190hp with chip race. but I feel a little extra horsepower above 3,000 rpm, is that normal? Do you immediately feel extra horsepower or in high rpm or certain circuits? how works for you can tell your experience

@@yasineken4121 Mine was felt more or less immediately around 1500 rpm. Mine was a different engine which in my opinion was already tuned from the factory since it was already 190 HP. With race-chip it went over 220 HP.

@@bonevchannel I did a test drive again but I feel an extra 5hp. really weird. but race chip says that nothing can be done unfortunately. I will return it and get my money back. Race chip: as already mentioned engines have a different serial tolerance, this means that the performance given by the maker is not always the actual performance of the engine. Depending on the deviation (up or down) it can result in a different performance delta with tuning.

@@yasineken4121 I moved to EVs, so much better and quite now 🙂

you have to have it checked and see what is the error code and go from there.

@@nerogruda2114 yes, keep the equalizer flat on the new unit and max out your treble and bass on the Bose.

@@bonevchannel very kind from you with the fast response. Now i am very confused. My MMI audio doesn't have sound anymore when i connect my phone through car bluetooth. I have to change the source to AUX in order to get sound. Another thing that i am confused is that the seller wrote that if i don't have AUX but AMI port i need an AMI to AUX cable in order to get sound. But i have sound through android auto but it's just pity. Thanks for your time.

@@nerogruda2114 you have to connect your phone to the new unit and disconnected from the car audio MMI

Well, you should Google how to get into the recovery mode and use the USB C cable

I love it but now I have a broken zipper so let’s see how it goes with the warranty.

Try rebooting/disconnecting the software and power cycle the car

@@bonevchannel Thanks for the reply! I did try all the power cycle and still the same. What does the reset actually do? Is it important or can I leave it? Thanks 👍🏻

@@ksrnate I guess you can skip this and try the rest. Are you sure you are using the same S tonic gearbox?

@@bonevchannel I think so 🤭 it's a 7 speed

Just make sure no pressure is applied to the sensor and your tool is 100% scratch free. Good luck.

Please subscribe to support the channel.

Please subscribe support of the channel. Thank you.

@@bonevchannel Doneee

Hi, you need to open Terminal app. That is where all the magic is happening.

They will not show as overlay unless you switch back to the MMI. On my model I had a separate display for those so it was all good. Still switching to MMI is just a button away.

You are welcome. Please subscribe to support the channel.

No idea. 🤷🏼

Thank you. Very much appreciated.

hey where did u copy and paste the command in point 1.

@@amritabhumra8970 In the terminal

I am glad it worked. Please subscribe to support the channel.

Unfortunately I do not know. Check Ross-tech forum.

Glad it worked for you too. Please subscribe to support the channel.

hey where did you copy and paste that point to see if zero comes or not. can you please help

Your error is different than mine. Please check Ross Tech forums about it.

I am glad to hear that. Please subscribe to support me.

Good morning. I have never ran across that. Might be better to get it into a garage.

Have you tried both commands. Sometime the first one gives and error but the second one still works.

Thanks. Please subscribe to support.

I am glad it worked out. Please subscribe to the my channel to support it.

To drive in general to save gears life I would say automatic on comfort mode.

Please subscribe to support.

@@bonevchannel done bro

@@djohn0909 👊