Відео

hi! this is grate. But it do not calibrate!! way!? help please

Please note. According to the specs, the Nano cannot be powered through the VIN pin with less that 7 v. The 5 v supply should be connected to the 5V pin.

Great project with a well-documented sketch. Some issues with stl file of body, which has a recessed back, making printing orientation difficult. Also the part is too big to be manipulated or sectioned in PrusaSlicer, as suggested in the instructions.

You know another thing to prevent your pins from being all kinds of crazy like that paying attention to what you're doing.

Does this work on rear sensor?

Somebody help me i got pb variant

I did this EXACT same thing to my car because my dongle is saying, "rear brake pad sensor fault", except I soldered the wires together and the light is STILL on. I reset the fault in my PCM and it's came right back on. Edit: BTW, I put brand new pads, rotors and calipers on the rear of my car, but my car has H&R lowering springs (2") and 225/40/18s on it, so the wiring rubbed through. I cut the harness all the way back to the plug and resoldered them, so we'll see.

Will it work for a bmwi3 range extender

Looks like you might need to update the Amazon nano link

Where did you learn all this? My and my kid are trying to teach ourselves but there’s so many different videos and it seems like everyone has a different way of doing this

That’s what I’m talking about a real mechanic thank you have much I figured I could do that but wanted to see if

Great tutorial! No bullsh... around. Thanks!

Ive had luck with Keyestudio and Elegoo Unos. Mune have lasted and worked for years. Hitlego Nano worked once and then overheated and was kia. Im nervous of buying the clone Nanos. Maybe thats why they sell them in 2s and 3s. 😂

Tried this on a nano that I can't upload. Turns out it has a defected chip. What a bummer.

W video thanks bro

You got me worried now, how do we check them for viruses?

How do you know which sensor is the left

Car still runs fine. Found mine the end was totally off. Just a lil piece but yellow break pad light turned off.

any tips for unsoldering them

source code?

How do i get the code for this project?

all Arduino-compatible boards contribute to the growth and accessibility of the Arduino platform, and the term "clone" may not accurately reflect the collaborative and inclusive nature of the Arduino community. Instead, it might be more appropriate to refer to these boards simply as Arduino-compatible or Arduino-derived boards.

Just fantastic, I will do it, it's cool. I would like to modernize it further. here are a few ideas, and then we’ll see for ourselves, but this is already cool. Tilt Indication: Add visual and audible indication function to indicate tilt in a certain direction. Attachment Magnets: Add magnets to the level body to allow users to easily attach it to metal surfaces.

Is there a way to do this with just 1?

Extremely interesting video. Thanks! I learned a lot.

Thank you. I'm new to working with Arduino and I had a couple Nano that I couldn't upload to period, not even using an Uno as programmer. I was able to use a good Nano to flash the new bootloader to them following your video but they still wouldn't work. The tx LED was constantly lit up on both of them and I'd tried hitting 'reset' as I started an upload to no effect. Out of frustration I eventually did a double click of the reset button after I'd started an upload and surprisingly the one I did that to uploaded, so I did the same on the other and that fixed that one as well. Now they both can be uploaded to without issue, no more constant on tx LED and no more having to select 'old bootloader' either. Now all my Arduino have the current bootloader. Thank you!

3 years later and these instructions still worked! Nice!

Replaced brake pad on my 320ied but could not reset mileage from dashboard: reset unsuccessful. Sensor seems faulty n i just removed plastic n twisted the 2 sensor wires together to close the circuit. Reset was then successful. Thks a lot

Worked perfectly, thank you!

whow, I really like this kind of ingenuity. I will do this to my 3 Nano clones too.

Its a $5 part. Why not do it right and replace it?

I went to grab a sensor at the local yunkjard yesterday and the car that was there had the sensor cut off and the wires twisted together just like this video. I was so confused as to why he did that and today i run into this video showing me why 😂 probably just going to do that with my car instead of buying a new one for $10 on rockauto

anyway to do this on portable version of IDE? Edit: got it working! Thanks And for who use oled screen like me, disable adafruit logo and delete its line from IDE

good video thanks

This warning can trip if the car has high mileage as well and can be very annoying especially when you know the brakes are good. That's why if you have an older model, this is a great fix for that annoying "service death light".

Nice build, in the related article you mention printing the case without supports. Can you detail on this (how to arrange the support etc)?

Thanks for the educational video. Unusual and useful crafts the main thing is the possibility of repeating the project. Im 65 years old and i did it.

"error 13 internal library install failed. moving extracted archive to destination dir. library not valid"

Just An over all Brilliant Solution to a free up more space, and your explanations and methodical sequence for me is spot on, a Thank you over 2 years on from original post.

Very nice upload! Thank you :) With your help I finally managed to get my rf nano's up and running by flashing a working bootloader to it 😊

＋👍Nice project, I wish there were horizontal center cursor dots ua-cam.com/video/POO9Zet4umk/v-deo.htmlsi=MTFz7LSMw3dEHl6i

Very nice video, everything clearly explained. After spending almost 5 hours on troubleshooting my AliExpress Arduino Nano, this is the only video that managed to work for me. I connected it to my original Arduino Uno and burned the new bootloader onto it. Thank you for saving my money, keep up the good work!

Excellent

When i paste link into browser, a red screen pops up and warns me the site is unsafe for my PC. What is that all about??

Good explanation, i have tried your code is working . thanks for your effort . i face one problem x angle vary continuously 0.01 degree for every second in sensor stable position .any guide for that.after few minutes it goes 5 to 20 degree.waiting for your reply.

Thanks for nice title, not click bait, already answered. Subscribed.

You appear to be the only person on the internet pointing out that for clones the old bootloader must be used, was surprised that this was so hard to get working, thanks

Tip..if you try to reset and come reset unsuccesfull..just realease parjing break and will reset...say thanks later,took me couple of week with all posible trics..f10 2014..parking break released..succes😂😂silly shit

Can You Send Me design file with .SLDPRT format?

Thanks for the video & the clear step-by-step instructions for both videos. Which version of avrdude are you using to skip Arduino's IDE?