Відео

WHAT ARE the naME and part # for fuses and switches? I don’t see the link you provided

Jenn Aire knows they have this problem, it is pervasive. Crap company.

Thank you very much for the video. I was already looking to purchase a new one that would have cost me around 3k. Part cost me $35 and we are back in business. Thanks again

Your video is still helping people ! Great video saved me a service call for our oven also. The details about checking the fuse etc were SPOT ON ! Thank you. And also saved us from having no oven on christmas !! Thanks !

Curious to what torque wrench you used

Ohhhhhhhhhhhhhhh

How many times do I need to clean the filters? Some say every 6 months others say once a year.

Very helpful thank you

any idea why our oven won't slide out enough to reach the screws on the side?

Dude, there’s two batteries in it!😂

Thanks for the video. New boat owner. Doing my service this week

I haven't seen vents or returns before. May I ask why you added them?

Amazing video, thank you so much! Question: an OEM thermo fuse is 160$ and the amazon is 35$ - are they the same characteristics?

This is my exact tub with exact problem, well my left side big pump is also leaking, I have unfortunately got rusted bearings in the motors from leaking also. Where did you find the wet end ? Part number and who you got it from would be fantastic!!!!! Thanks for the great video it was just what I was looking for. !!!!

This video helped me both times ,first time how to do it second time to remember how panel came off lol

I’m no mechanic but I believe when you hook up the water hose to where you hooked it up at water doesn’t get to the actual water pump. It just goes through the water passages to flush them out

Great video! What is book you got the torque specs from?

Thanks for the video. Not many videos on this engine.

Mine has a switch on BOTH sides of the door but the video shows, on the inside of the MW, that the two switches are together? On mine, the left switch seems ok, the right switch won't go all the way in. Does that mean it's not functioning?

Have you had any problems with the shift actuator? I keep getting AB actuator shift differential pressure .intermittent problems. Took to dealer, could not find problems, any advice?

Thanks a lot for this useful video! 🙏🏽

You should not have water in the lower unit EVER. If you do you have a bad seal somewhere

Thank you for this video. Like many others here, you saved me hundreds of dollars.

i've a question... why the tube have some black or brown residue... and do i need to replace them ?!

Was about to replace the oven at $1700. Spent $16 to fix it. THANKS!!!

Great vidéo

Thank you so much for this video! I was able to save $1000 (at least) by replacing a cracked wet end myself. Spa place wanted $700 for a new pump and $120/hr. labor. I fixed the problem with a $75 wet end and $30 of tools. The hardest part was getting the size right.

I've been an appliance tech for 12 years. I finally started my own business 3 years ago. One of the many perks I enjoy being my own boss is I never have to work on those piece of crap Whirlpool, and Kitchenaide combo oven and microwaves again. They are over engineered and the microwave does not conform to the normal diagnosis used on OTR units. I encourage other techs to follow my lead so Whirlpool just might stop making them....., or at least redesign them like GE which rarely fails, and when it does, it's much easier to diagnose.as it's basically a separate microwave mounted above the oven then just the control board is separate instead of Whirlpool that often has 5 frichen control boards and that one fuse that's buried on the right interior. WHY bury a fuse that deep??? OK. rant over.

100 inch lbs converts to, 8.3 foot lbs… Torque Spec for the lower gear oil drain. Google is your friend.

Hello, Are you interested in testing our products? We would like to invite you to test the Rear Windshield for your 2016 Kawasaki Teryx 800 4

Nice video. I have the exact same year and OB as you though I keep my boat in the water 6 months of the year. I was told that when you use the flush port, the engine should be off and does not matter if the engine is down (out of the water) or up, when the boat is in the water. And was told by Mercury that the engine does not have to be warm to flush (when using the flush port). Though if using motor muffs, then the engine would need to be started. Just curious, did you receive different guidance? Thanks

Sponsored by Hellmann’s 😂

Thanks for posting. I just did my oil on my 200HP merc. For the lower unit, is it a different adaptor for the pump to replace the gear oil? I will be doing this part tomorrow.

i am going to check the fuse right now we lost power and when it came back on our oven didnt work like yours but the control panel was very very hot to touch could this be the issue as well

thanks for the video but why is the intro very loud

Thanks for posting. Easy to follow and eased my anxiety doing both. I couldn’t find anything on our engines, everything was a ProXS or Verado Planning on doing one for LP fuel filter and impeller? 😉

Is there one with a bench seat instead of a center console

thanks. great video

It looks like your MW unit is separate from the oven unit. Ours is one unit.

My oven went out 2 days ago. Watched your video and ordered a part for my Whirlpool oven (model# WOS51ECOASO4) and it showed up in 24 hours. I put it on and I`m back in business. Thanks a lot for saving me several hundred $$$. You`re the MAN!! Part cost me 21 dollars on Amazon.

Where does the cable go?

Thor…your video has been very helpful deciding on what to purchase. There are so many options available. My concern was to have them up tight to the rockers. This rebel is my wife’s truck and she is worried about slipping on the board. Can you comment on this plz ? Another question is if they have a lot of flex ? Thanks for making this video !

I am getting error codes on my microwave and read a comment from a technician that makes total sense - he said that If the door switches are not functioning no other repair you make will prove to be effective. To this point, i suspect that my problem is my actuator switch - there are two small black buttons on the inside frame of the microwave door that get activated when the door is closed. The switch on the left side of my microwave can easily be pushed in with your finger, however, that is not the case for the button on the right hand side. Would you be so kind and tell me if both of your switches are easily be pressed in with your finger? If so then its only a matter of reconnecting this piece and mkg sure that the little spring is attached. There are several videos that show how to do this. Just hoping you can save me a lot of effort tearing apart this microwave! Thanks in advance!

So dirty the floour meabe a sweep will be fine, the brooms are cheep, i realy would not like to work like that

That sounds amazing

Just ordered mine for my 2022!

Promo'SM 💞

Hello I hope everything is good with you. I looked into your UA-cam channel and discovered that it has certain issues. To improve views, subscribers, and even revenue, you could customize your channel. Your channel will rank quickly and gain popularity if it is slightly optimized and the videos are search engine optimized. You have a very low (0/100) channel SEO score. Would you like to make changes? I'm awaiting your answer. I hope you have a pleasant day. Regards and gratitude Yousub Ali

I just got this and it drones around 1800 with acceleration pretty bad. It’s loud as hell inside compared to what I’ve had in the past.

Do you have a video on replacing the microwave drive motor? Ive looked down into the hole where the drive motor shaft is supposed to be and there is nothing. Looks like I'll need to disassemble the using