Відео

It's probably not sealing somewhere, I had tiny holes at the drain too, I have discovered these later. it can can also be from a hose since there are many there.

​@@beardsntools it was the dishwasher sump seal . Now working .

@@mauriceroushdi9854 Awesome 🤗

It lifts the machine up so it's tilted, then water, thanks to gravity, spills over the edge of the base pan and onto the floor.

Hope it works for you. I applied it on edges and then sandwiched it together, which created pretty good seal. It's been years. No leaks since

You're welcome, gorgeous

You are welcome dude ;)

You are welcome dude <3

Well this was tricky to find. I tried to search my pc for words I can hear in video, but that failed. I actually had to power up that hp ipaq pda, that was playing the song in video. Anyway I found it, it's Klubhoppers rain! again Original radio mix. It's old, but it still slaps, just like my hx4700 pocket pc :) The genre is called handsup and if you like this type of music, there is a link to my playlist on my page(I have also added this track to it now).

​@@beardsntools thanx

Yeah even that was too good for minecrap graphics

Yeah that's exactly what I did as shown towards the end of the video. No leaks anymore.

Don't lmao xD

Yw dude :)

Nah it was just a cheapo $40 drone.. it had onboard camera, but unfortunately that didn't save, even tho I taped the sd card and the battery in. The drone was still on once crashed, but I guess if you don't end the video it is lost.. I did push the button from the distance.. but it probably didn't register. Should had pushed it again when I was closer.. at worst it just starts new video.

not sure what you mean... if it can stay functioning after you do the first step? Well, if you remove water from the base of the machine and then it works, it should continue working as long as no more water is added. My dishwasher had a very small hole in the tub, water slowly leaked during use and it would eventually fill up the base and trigger the overflow protection.

Hey man. I used the atikmdag to patch the pixel clock and unlock more mhz because it's limited by default to 165mhz. I have ati radeon hd5870 which has 1.3 hdmi and it's not capable of 4k by default. The gpu also has display port 1.1a that is also not capable of 4k at 60hz.. instead it does 30hz.. but there exists a tool called Custom resolution Utility (CRU). After you patch the pixel clock.. it's likely you will have to use CRU to create a custom resolution.. and lower the settings such as blanking, back and front porch.. usually if you reduce everything to 12 it should be working on most lcd panels. If not you have to increase these settings. It's trial on error. The reason why you have to fiddle with this is because you need to save pixel clock mhz to enable higher hz. In general the closer you get to 60 the better. You will also have to figure out whats you new pixel clock limit... In my case with this gpu it seems to be 330mhz for hdmi (which can give 4k at 30hz) and 480mhz for display port that easily gives me 55hz at 4k(with reduced settings) for my pc monitor, that's also connected. You can do this by adding a resolution.. pay attention to pixel clock that is listed, then restart your pc or use the included gpu restart program. After reboot go to advanced display settings, click "list all modes" if the custom resolution you added is listed(such as for example 4k at 36hz) then it means you are within the pixel clock limit.. if it's not then you are above it and you need go back to CRU and lower it... if it's listed, then try it out, to see if you get usable mode, if you do then you may want to see if you can get better, so you can get higher hz. Note that the resolution might be pushing the limit and glitch, the common is random green pixels flashing, so it looks like your monitor has dandruff, or it might even flash, or briefly show then go all black, or not show anything at all, in that case you need to lower hz in cru. Windows should revert to previous mode if you get unusable display.. if not you might have to go to safe mode and delete the problematic custom resolution.. if that doesn't work then you can try unpatching the driver. If still doesn't work then you will have to uninstall the gpu driver, reinstall and then try again with patching and creating your custom resolution with cru.

@@beardsntools Thanks for the detailed info

@@GalaxyCat001 you're welcome man, hope it helps.. I forgot to say similar patch exists for nvidia.. atimdag is for ati/amd gpus only

If it leaks from there and not somewhere above, then it leaks through the hood release cable. It's same procedure. Remove the wiper arms and the cover, then with seal where the cable goes into the cabin with some silicone. It's close to that cable box that I sealed, in fact it's right next to it.

Yeah it lasted many seconds on fire, both in game and the pc itself

The fire has spread out of the game xD

Glad that helped

haha you replaced "mechanic" with DIY. lol that's what I said on some other channel, where some dude was whining about a costumer hurting his feelings. Yeah I think it applies there perfectly xD

You're welcome

The reason why it is in the bathroom is because I am renovating the kitchen. Even if I didn't I would at least have to do some plumbing first, as there is currently no tap to plug a dishwasher to the water supply.

I don't know what you're talking about, but I sealed the cable box as shown and the leak was fixed. No more water in the car since this video.

Good job and you're welcome.

I made it even flatter

Glad to help

I could, but this was the fastest way to fix the problem. Just use that black sealing silicone I bought for this. Still seals very well.

Yeah it's a bad vid because it was rushed and cut down to fit IG vid length. Doesn't really show what I am doing. Could use an extra minute or two.

I hope it can run crysis... oh wait it's 2021 so the ultimate benchmark now is: Can it run windows 11?