Відео

Hi, I don’t have a specific part number but if you go into my Amazon link in the description of the video and just type in the vehicle you have and search for the cam locking tool it will come up with some and then you can just pick the engine code that fits yours

Thanks for the reply but as I've looked further into this job , are there 2 types of timing tools where the other type doesn't require the cam carrier to be removed and just remove the vac pump to lock exhaust cam?

@Liveforeever hi yes that tool is available now but will only work if you have the cam sprockets without the outer lip or you won’t be able to get the belt off properly. 👍

Yh there are some good ones that will good for a temporary fix, steel seal claim it can be a permanent solution, so worth a try before having to fork out a load on a repair 👍

Hey 👋 this message is the exact reason why I post my videos! Thanks for watching 😊

@MrAutoFixer I've had positive feedback for things and it's a great encouragement. Thanks again pal, you know your work is worth something. Much appreciated

Hey 👋 yes I know what you mean I’ve had some that are just so tight they don’t fit !

Yh the cams will have to go in a certain way, you can buy the cam locking tool cheap on ebay and you will need it if your rebuilding one 👍

@MrAutoFixer already ordered one thanks 👍🏻

Nice 👌 let me know how it goes 👍

Hey 👋 do you have any codes logged ? Have you had somone look at in on live data ? If not then I would get that done rather than just guessing and throwing parts at it 👍

It’s normally caused by the wet belt breaking down, you need to check the vac pump and if full of belt fragments then change all at the same time. 👍

Hey 👋 the steal seal is ment to be good and the way I see it is if a £30 bottle of that fixes it the happy days ! If not your going to pay out any way so harm in trying 👍

@MrAutoFixer have you had any cases of it blocking up the heater core? Or causing blockages around the cooling system? Some reviews claim they cause heater cores to block up.

@ the only time it’s blocking the heater core is if you use too much, some people just shove loads In And hope for the best don’t be that guy lol 😂 just get a steel seal and put in the recommended amount and see how it goes if it don’t work then you know you have a bigger bill coming 👍

@@MrAutoFixer thanks alot got a sub from me

@@erkkadzai8226 thank you ☺️

Hey I had one in with a similar fault and turned out to be the timing was slightly out. It might be worth you getting it diagnosed before it becomes a bigger problem 👍

Thanks for the quick reply, mate! Did a bunch on it recently, timing chain and all that comes with it, fuel pump, sparks, coils. This annoying thing was present before it all and still is. Just driving me crazy for ages now. So frustrating. Thanks again 🍻

Hey thanks for watching 😊

Hey 👋 thanks for watching, Yh top up The coolant and run up to temp and check again, then test drive and recheck the level when cold 👍

Hey 👋 I think it’s about 40k on this one, if you do buy a car with this engine just have the belt done then you can’t go wrong 👍

Hey 👋 thanks for watching, let me know how you get on with urs ! 👍

@ brilliant! Will do bud

Hey 👋 thanks for watching, let me know how you get on when you do it 👍

@@MrAutoFixer will do it won't be this year though, got my brothers Ford Ka 1.2 to do shortly.😊😊🤣🤣 keeping my hand in even at 70. 👍👍

@@MrAutoFixer Noticed the mileage was only 40k, is this common? as mine is at 34k?

Always gotta keep a hand in the game just in case !

Yh I have seen them go bad on as little as 26k miles so the sooner the better in my opinion 👍

This procedure is to reset the service light after you’ve given the car service if you have other lights on the dash or the car is cutting out for whatever reason you should probably go to a garage and have it checked out

Hey 👋 they come with many different engines so it’s always best to check the engine code of the van you want to buy to check but many of the newer one are wetbelt 👍

Hey 👋 I’ve never had an issue getting them out but some are just unlucky I guess. Glad you have it sorted tho 👍

Hey 👋 technically no there shouldn’t be any soot there, do you have any other issues with the car to suspect a problem? Could be worth having it looked at and the dpf soot level checked ??

@MrAutoFixer no no issues no codes runs perfect will do the check just ordered the thinkcar scanner thanks.

@whatscookin8269 perfect that’s good then, let me know how you get on with the scanner

Hey 👋 yes you will have to replace the camshaft as it’s the lobes that spin on the shaft causing the issue 👍

Okay cheers and where did you get the torque specs from please could you send them through to me please would be much appreciated

@MrAutoFixer

Hey 👋 did you connect the correct wires? And are the connections good ?

@ i will check it again.

Hey 👋 allow between 400 and 600 for the repair, prices will vary depending on what parts are used and where the garage is etc 👍

Hey 👋 yes very handy around the workshop! Thanks for watching 👍

I’m pretty sure it will still run just will have a EML light on, just unplug it and give it a try 👍

@@MrAutoFixer Thanks, would that mean it will fail the MOT with the EML light on?

@liftingtheveil8361 yes it will fail a mot with it on just depends how much ya mot tester likes you 😂

Hey 👋 Yh I know that feeling! My clock is currently turned off I don’t need that negativity In my life right now 😂 Hope you get to use ya new tool soon it’s always fun to try out the new toys!

Hey 👋 thanks for watching 😊

Hey 👋 thanks for watching 👍 and I don’t think many people pre load nowdays !

Hey 👋 thanks for watching 👍

If you do all the regular maintenance you will be fine 👍 I’m based in Essex

@ If only you wasn’t so far I need a reliable mechanic 🤣. Thanks for responding. All the best 👍🏻

@mitch0078 oh that’s a shame I’m always happy to look after people, best of luck 🤞

Hey 👋 I would allow up to £200 for the job inc parts

I think it was 2017 ish

Wow that sounds like a headache! Good luck with getting it sorted 👍

Hey 👋 I would allow up to £200 for this job inc parts just depends what parts you use will change the price 👍

Hey 👋 just check them again in a few miles and see if they have anything on them again 👍

Hey 👋 thanks for watching

Hey 👋 I would allow about 4-5 hours to do the job 👍

👍🏻

My wife's 1.2 has just gone, luckily I think the cold weather cause the oil pressure to drop off at cold start so I only did 500 yards on limp mode to the garage. 10years old and 50k miles, serviced religiously. My Dad has just bought a Ford Puma with the Eco Boost engine and that's on 20,000 mile, 2 year service intervals!?!

Hey 👋 there not so bad if you keep on top of the maintenance 👍

@MrAutoFixer full service from new at citroen garage wet belt failed at 50.000 replaced failed again at 60.000 miles huge oil consumption

Well that’s just bad luck, sorry you had a bad experience

Hey 👋 yes I’m sure it did, it was a while ago now lol , if you can I would get a look at the workshop manual just to be sure 👌

Hey 👋 that’s great news, thanks for watching👍 let me know how you get on

Hey 👋 yes they are one of the most fiddly ones to change I am also confused as to why they didn’t change the side the access was! 🤯

You should be looking at around 500 for that job 👍

Hey 👋 great advice, that would work too well that’s why they didn’t do it out the factory lol 😂

Hey thanks for watching 🤗

Hey 👋 good luck 🤞 I hope she is happy when you finish it 😂

Hey thanks for watching 🤗

@@MrAutoFixer Subscribed to your channel mate 🤓