Відео

@@Missfitted 06

@OTBspeed6 I think it's a universal spoiler, they just have different versions that might just fit different cars.. it doesn't have holes that bolt up to the stock location.

Those cables are for the differential . It's what sends the signal to the computer to differentiate the awd.. I don't know the voltage

@Peaterbeaterchickeneater when you take out the factory hid headlight, the ballast is on it as well.. so you just plug up the led headlight like normal. It's plug and play..

So let me ask you this could I just buy some aftermarket halogen headlights instead of the fancy ones like you got in m asking because my HIDs suck and after replacing the lenses and the ballast and the igniters I think it would cheaper to just buy new headlights all together I’m not concerned about the HIDs they suck anyways and the is a blue Mazda 6 at the local junk yard with Minty fresh halogen headlights I would like to swap them

The hood has been discontinued for a long time. The front lip is an ebay st03 sti lip and the grill is from ebay..

@phredflypogger4425 this is one of my older videos, so sorry for the audio quality..haven't watched it in a long time lol..

@zotanzero Changing the knock sensor did clear the code.. I don't know why your car would be having cooling issues from that though. What cooling issues are you experiencing? And what performance issues?

No, the evo brembo upgrade only works for the speed 6 being the fact the brake lines are the same and the hub bolts line up with minimal modification.

Takes about 6 1/2 to 7 qts with a balance shaft delete..

BTW my car color is also that rare Black Cherry color.

Only place I would recommend is techmods auto support..they are in Long island so a bit of a ways for you but the best hands down...

Thanks for the kind words! More content coming soon!

www.qa1.net/automotive/suspension/springs/mustang-ii-springs here is the link.. you can choose you desired spring rate from thier options..

Thank you!

@jaimearzate2444 no problem!

When I press the gas a little bit, the sound gets louder. When I take my foot off the gas, the sound slows down.

www.amazon.com/MZ23152314A-Front-Left-Right-Pair/dp/B01690MT1M/ref=mp_s_a_1_2?crid=3CWOR3AQD20WP&keywords=mazdaspeed+6+axles&qid=1699914670&sprefix=mazdaspeed+6+axles%2Caps%2C109&sr=8-2&ufe=app_do%3Aamzn1.fos.f5122f16-c3e8-4386-bf32-63e904010ad0 these are good a replacement. You can get them on ebay too.

Hello bro i want to ask you after you get the axle from transfer case out where did you pull it out mine getting stuck at the suspension

Thanks man, appreciate the support!

No, they are different

thanks @@moore240

I will make sure to tell people stay 6ft away "covid rules" 😂😂😂😂😂😂

I've been using liqui moly for years.. its really good.. the video I did I was trying a different one out.. I highly recommend it.. either the leitchlauf or the syntoil premium..and when input the rear coils on I will do a full review of the coilovers

I have it, just forgot it in the video. Thanks!

How is the liqui Molly?

Go full port injection and never look back

Yeah, that arden valley was a bit more intricate than I remembered lol.. but definitely alotta fun'

That's not terrible #s.. but if you plan to keep the car and really like the platform I would build it just for the peace of mind.

@@moore240 i want to keep the car for sure it whas my dream car i knew the engine problems the axle problems before i bought it and 1 week later i broke left rear axle 😂 anyways im new on the speeds thats why i need more knowledge before i rebuild it witch pistons i should buy the rods or should i go stock bore or 88mm cause the sleeves are like paper on there i hear my goals are like 400hp daily car that it can handle like 600 hp for safety

@@moore240 i put the stock Rear axle cause i found it cheap for now 200 bucks when i go to rebuild i change them with Dss ones

Manley rods and pistons are pretty popular. As far as sleeving goes the speed motor is good for about 600-700.. so you would be ok.. are you planning to build it yourself?

@@moore240 i can but now i dont have any space to build it

Was a very nice run.. definitely gotta do some more! Very nice driving sir!

@@moore240 definitely need some more runs! & thank you 🙏🏽

No, thats why your supposed to grind down the mounting tabs to prevent that..

108k

edgeautosport.com/driveshaftshop-500hp-axle-rear-driver-mazda-mazdaspeed-6-2006-2007/?gclid=CjwKCAjwiOCgBhAgEiwAjv5whLAk1BLTq1PH2XkH2RRtEfxMgo3X9qV_HKpImiteOvJgI3xj6lrIMxoCA_cQAvD_BwE This is the dss axle, you have to get both though. So it like $1500.. they never used to be that expensive. There is another company you can try out, people seem to have been having good experiences with them and they are much cheaper! xspeedfab.us/products/mazdaspeed-6-upgraded-rear-axles You can check them out too.

They are from ebay.. I don't remember if they had an exact brand name. But you can find them on ebay, but the price went up..

Yeah I gotta do some maintenance on the x5.. thanks for the advice!

Enkei ts9

It all depends on the parts.. some parts you can only get at certain places.

www.ebay.com/itm/185195794470?fits=Submodel%3AMazdaspeed%7CModel%3A6&hash=item2b1e879026:g:-iMAAOSwaA5WhKZh&amdata=enc%3AAQAHAAAAsFm3THEZIuZRRaMShq5%2FejM%2FtLIL1UNZJL0bAP3haPpXYMdQ2ippIHi4lp2vnfPEUGU0e2PBcow8it5qD1i0tEVeo3dWECrt6vhbRzQAqaqW1PgCDQe%2BdGiaWw4tPFTNU6xfwYXU2eiXWp0YGO%2FuZQ5lq3stMge7aJbXWi6GgG%2FkWWd74eWC192YogtTRad8AU33klZLB94utNNh65vGxLo%2BWvFDrpcPbFfHqLcZ8otd%7Ctkp%3ABk9SR7qhzdCNYQ

I wouldnt pay that much for them, but the price on everything is going up

@@moore240 oh yeah, that’s arm and a leg might as well pay for some custom headlights at that price.

This was a few months back.. there hasn't been a meetup/cruise in a while. Hopefully something can be setup soon.. I will keep you posted, I would like to see a modded 2.5t 6 .

@@moore240 yeah I noticed it was 2021 but it was the most recent thing I could find. & yeah I’ve done a good amount of mods performance and aesthetic so far I’d love for Mazda enthusiasts to check it out , keep me posted ! You got an ig?

@@mazi6gtr642 ig is z00m4z00m.. yeah im gonna try set things up. A few people been wanting to do a meetup

@@moore240 bout to follow u rnnn

Where are you located?

You can go to techmods auto support if your in the nyc/li area or tri state area. They're the best with mazdaspeed platform!

I'm on the island border of Nassau Suffolk... I tried to hit him up on the gram but know answer. if you have a better way please let me know. 9 have a list of stuff needing done. thanks for your help

@@josephdaniels9160 631-552-5744

Full race manifold, corksport fmic, htp 3.5 intake, ported stock intake manifold, ebay catless downpipe.

@@moore240 ahhh it's that full race manifold making it sound so sick, might have to look into that. Did you say if you were on just pump gas or ethanol mix/aux fueling?

@@kevinaubrey9849 yea I'm on a e85 mix.. makes a nice difference, depending on your tuner

@@moore240 what brand manifold bro?

Yes it was a pain to bleed out, I had the same issue.. I even thought the original calipers I used were faulty and got another set, but had the same problem.. I bought a brake bleeder kit from harbor freight and bled all four calipers and then pedal feel was strong. So that's my recommendation..

Ofcourse it is, that's the point..

It's a bit thicker.. people usually run use 5-40 when they k04 start smoking up.. and also that's what speed performance recommended after building my bottom end so that's what I stick to. 5w30 is fine though. And I change it every 3k..

@@moore240 Stock or oversized bore on the build? Just curious as i have 88mm manley pistons and rods in mine, and thinking to try thicker oil maybe. Thanks!

@@ASK_666 sorry I just saw your message, stock bore.. the builder is who told me to stick with 5w40

The main group of guys I roll with are mainly in Brooklyn and Long Island..

@@moore240 what days do you ll meet up... I would love to swing by and roll with some other ms6

@@josephdaniels9160 well since it's winter we haven't really met up.. once it gets warmer we usually meet up on Friday nights. Or Sunday morning for runs/cruises..

Lol, yeah I did.. didn't see him till it was too late..