- 13
- 32 116
Donald Purcell
United States
Приєднався 6 лис 2017
Відео
Hovercraft in a soccer field (1st person point of view)
Переглядів 243 місяці тому
Some footage of our first run on open flat terrain.
UH12 Hovercraft in a Field after 35 years
Переглядів 794 місяці тому
This is the first time we have driven it under it's own power on flat land! It was really fun! My brother and I built this when we were in our teens and never had a thrust engine on it. Now in my 50s finishing the job! :)
Cross Country Skiing In Our Yard
Переглядів 277 місяців тому
Out playing on cross-country skis in our yard.
Sear Custom 10XL Tractor Plowing Tons of Snow!!
Переглядів 1,7 тис.9 місяців тому
This was my Sears Custom 10XL plowing in Lunenburg MA from a few years back. I don't have this tractor any more but it could really move some snow with two gear ranges, chains and weights, wow. Enjoy! Don P.
UH-12 Hovercraft coming out of Garage
Переглядів 8011 місяців тому
I have a little throttle issue, not enough thrust currently. Learning to navigate slopes
Hobie 16, Bare Hill Pond Harvard MA
Переглядів 96Рік тому
Sailing the Hobie in some nice wind. What a dragster!
Universal Hovercraft UH-12 from the 1970s
Переглядів 99Рік тому
This Hovercraft was never finished 40 years ago. Taking a shot at finishing it now.
Winter Fun Flying in Back Yard
Переглядів 38Рік тому
Pretty winter snowfall as seen from a GoPro taped to a modified Slow-Stick.
Sailing in Harvard MA Bare Hill Pond Laser I #3779
Переглядів 1092 роки тому
Windy day on Bare Hill Pond. 2nd time sailing this boat after waiting 27 years for me to repair it (mast step issue). This is sail #3779 now there are over 250 thousand Lasers built. We love this boat! More fun to come!!
Locke Lawn Mower - Triplex - How to Start and Tips for Maneuvering
Переглядів 10 тис.2 роки тому
These lawn mowers ruled for decades before the Zero Turn rotary mowers were introduced. Scissor Cut and very maneuverable six foot wide cut in a small package. This video is an attempt to capture some of what I learned while cutting with these machines for the past forty years before it was sold and just a memory.
Husqvarna Tractor Trailer Hitch Installation TS 354XD, How to install a hitch on your lawn mower
Переглядів 19 тис.3 роки тому
How to Install a universal trailer hitch on a Husqvarna TS354xd Tractor. Show modifications needed to get this hitch installed on the TS 354 XD Garden Tractor, How to install a hitch on your garden tractor.
Hi do you have any other video on instruction to start and stop Locke? I watched your video many times but cant get handle on, about to buy a triplex iand wanted a good idea. I have never used these before. TY
Nope, no other videos, I sold my locke, miss it a bit but glad it is being used and well maintained! One thing if you buy one of these you can't let the grass get too tall if you do the mower will lay the gras down instead of cut it. If this happens cut once one way and then a second time in the opposite direction. Then don't let it get too long again. Don P.
@@donaldpurcell5243 thanks. Can you advise where can I buy backlap kit for Locke?
Im curious how tall are you? It appears as if you have to hunch over to operate it?
Good point, I'm 6ft 4inches tall so pretty tall. I didn't typically have an issue hunching over. For comfort, I would walk next to the handles steering it with one hand walking next to the handles on the down hill side whichever that was down hill, most lawns aren't flat. You get more grass on your shoes that way though.
@@donaldpurcell5243 Thank you for your reply. I plan on restoring one after my shop is done.
@@swampyankee72 You won't regret restoring it. They are good machines!
@@donaldpurcell5243 I'm 5'10" so I think I won't be hunching.
The hovercraft build held pretty good for it's age.
Yes, we never finished it when we were kids, got it flying but never put a thrust engine on it until now. I've always wanted to see it work. I'm having balance issues and skirt issues so the thrust engine will probably move forward and the skirt will get addressed as well.
@@donaldpurcell5243 Once the bugs are fixed, i recommend a adjustable pitch propeller or fan type propeller. It will allow you to get the maximum trust from your engine. If you get the 6 blade type hub, since you have a direct drive, you can start with a 3 blade set up for best throttle response. I use to owned a home made hovercraft, and several Scat in my early 30's. I am 53 now and been thinking of building one. Hopefully this next winter since i am in Florida and the weather is nice in that time of the year to work outside.
When I was a little boy, my Dad had a landscaping business and had this mower. He had the attachment you could ride behind on it. And yes, it was the zero turn of the day.
Nice!!! What’s the max height it can cut?
I'm not sure, if you let the grass get too high then the reels push the grass down and don't cut very well. I'd say up to 6 or 8 inches you are fine but higher it's difficult. In the case where I had to cut grass that was high, I'd cut once in one direction and then come back the other way. The first past cut 1/2 the grass and laid the rest down so that on the 2nd pass it was already angled in to the reels.
I used this mower when i was 10 yrs old. My head was in line with the handle bars
That's funny I remember that my dad didn't let me run it myself until I weighed 100lbs. He thought lighter than that and I would not be able to horse it around!
A great action video. The rear tire chains are really effective.
Yup, you can see them swinging out from centrifugal force in the video I had wheel weights on that puppy too, it would really pull. I miss my old machine, it went to a good person who will take care of it!
Эх красавчик. Хорошо гребёт👍😎
Actually, very impressed. Thanks for posting!
Awesome Tractor and great filming!
Thanks! I agree, maybe someday I'll get another one! :)
cool mower! Thanks for showing it.
Kickass Video and exact what I was looking for. Great job
Thanks! I didn't see any other good Locke videos out there and I made this the day I sold it just hours before it was gone. I'm glad I have the memento; I wasn't keeping up with the grease fittings and sharpening etc. I'm glad it's in better hands now!
Don't you need a class A now that you have a tractor trailer hitch.
I had a 70” and a 75” as well as 72” Toro Professionals. The Lockes gave a much smoother cut as the Toros had rollers that made the reels bounce. We had a Peerless sharpening machine and bed knife grinder that did a great job. They are a great machine but maintaining them can be difficult.
Thanks for sharing.
That thing moving by itself is terrifying
funniest comment yet! :) I have three acres, it was a ways from hitting anything!
when i attach my weight for winter snow blowing, I fish a piece of dental floss down through the holes and tie a loop on the bolt and pull it up and through the hole. Pull it through the nut and tighten it up. The dental floss fits in the threads of the nut and doesn't cause a problem
Nice tip, I haven't bought the plow yet, still snowblowing but want to go back to plowing.
We’re do I find the dog bones
I honestly don't know. My dad has a pair of the long ones, I think there were long and short ones. He has 3 9.5 inch long ones.
I found one with 9hp Honda installed will that work well?
I remember my first job at "the power shoppe" repairing mowers. "John" would do the Locke repairs, mostly for the commercial guys. The Lockes were complex machines that required frequent maintenance, but they rewarded you with a great machine and beautiful manicured yards...
thanks for sharing! I agree.
My Dad had a landscaping business in the 60's and 70s. Had me and my friends out all summer using these "Locke's". We had 2 - 70" and a 75"' with reverse. No sulky. Even was taught how to backlap the blades. Thanks for the memories.
Thanks for sharing! I’m glad I have this video to remember mine. Don P
I ran lockes working for a landscaper when I was 19 back in 1984. I love lockes, I own 4 of them, but don't have them running. It wouldn't take much to get them running, but funnily enough I own a landscaping business and am usually too busy mowing with my rotarys to take the time to work on the lockes. It's a really lousy conundrum.
Sometimes I regret selling mine the rollers seemed to flatten the lawn and I'm definitely nostalgic but having it gone makes room for the hovercraft that I'm working on! :)
@@donaldpurcell5243 Hovercraft?! Then I hope we're going to get some videos!
Was this sold
Yes, I sold it very reasonably to somebody that would value it and use it and keep it going. Made the Video the same day it went!
yup, sold and gone but to a good home. someone who wanted to maintain it.
Where did you get the universal trailer hitch kit ? Thank You
I don't recall it was bought on-line someplace (i put the model number in the video so if you search on that you should find it)
@@donaldpurcell5243 Thank You, Nothing bolts on, You did a great job installing it !
Found it P&M Fabrication Universal 3 Way Lawn Garden Tractor Hitch (Amazon)
@@donaldpurcell5243 Thank You for the info !
Pumping the throttle does absolutely nothing to help start a Briggs
You got me there, never had the carb apart. I thought I was giving it a shot of fuel. Whatever hocus pocus I did served me well. I had several spring time 1st starts on the 1st pull! :)
you are so right, no "accelerator pump" in those carbs
Impressive! I’m guessing that you miss it? Quick question: Do you recall the cutting height range? I’d love to find one of these.
Sorry, I don't know. I'd look on Craig's list and ebay, they show up sometimes.
@@donaldpurcell5243 Actually, I bought one a couple of weeks ago. It’s a 1961 75” Triplex. I’ve been refurbishing it; will be rebuilding the carburetor and replacing the sulky tires this weekend. Thoroughly enjoying it! Also, as a bonus, I found that I’m a distant (quite distant) relative of SD Locke.
Best of luck with your new mower. Funny how some people are attracted to similar hobbies. I'm a tail dragger pilot with a 1947 Aeronca Champ and a bunch of Super-cub time. I haven't added on a sailplane rating yet but it might be in the future. My brother is a glider pilot, used to have a Schweizer 134 but now has an ASW20. Take care Don P.
@@donaldpurcell5243 Very cool! My good friend has a Champ; a fine airplane! I love the Cub (and similar) myself as it’s just relaxing and enjoyable. I’ve enjoyed some Stearman time, which is uniquely fun and challenging. Best of luck if you start flying gliders. Most of my soaring was in Libelles-excellent gliders. If I had ever “moved up” it would have been to the ASW-20. Those are awesome sailplanes, especially for the money. I could just never find one for sale! Best, Jim.
I have about 9 landings in a Stearman 3 from thew back seat. Very cool. Your right about the ASW20 it took my brother a long time to find one, I expect he'll never sell it! Take care! Don P.
I was employed in the mid 70's by a company in Michigan that primarily sold and serviced commercial mowing equipment. Locke triplex mowers were used by landscapers along with parks, municipalities, cemeteries and the like. Although not truly complex, there were a lot of parts that made up these mowers. The type of use our customers gave them meant that they were in at our place over the winter months for refurbishment so that they were ready to go in the spring. We would have hundreds of them dropped off in late fall. If they did a minimal amount of maintenance, they typically could go a whole season without any major attention. Remember that these were in use all day 5 or 6 days out of every week. I imagine that they could go for decades when being used by a homeowner. A co-worker did all the work on the reels. The disassembly and repair along with sharpening the reels and replacing the bed knives, shoes and whatever was required along with reassembly. I handled all the chassis repair/refurb as well as the engine work. About the time I moved on to greener pastures they were becoming too expensive to justify using them commercially.
I've done just the opposite. I originally used a Husqvarna riding mower - took 3 hours to do the lawn. I recently adopted 2 Lockes (one with a sulky) on Craigslist. With the Locke, just 1.5 hours. It uses less gas (not running it at top rev) and I find the extra maintenance to be the fun part. With the rope start and the exposed whirring chains, its the coolest mower on the block. Now I just use the riding mower for the edges.
Does anybody know the engine capacity of this?
8hp briggs
Nice triplex footage. I love mine.
What Masshole would give up this instrument for any price? Sub'd to see what could be better than this finely built piece of iron
Found it a good home, still in Mass though!
got tired of the grease fittings and backwards lapping the blades to sharpen and went with a Husqvarna 54inch. I miss the locke but not the maintenance. Maybe when I retire I'll get another Locke Again!
Super mit Brixen Motor
I operated one of those for an entire summer down on Cape Cod. My lawn cuts were a work of art! Wish I had one today.
i have one for sale. all original. it doesnt have the sides though, just the center cutter
I don't know of anyone who makes a triplex walk behind reel anymore. Good news is... there's a few cordless reels out there to build one fairly easily.
nice video. Thanks. Regards from Czech.:-)
Nice job. You would think a kit would not require that much modification
yes, I believe it is because there isn’t any hitch available just for the Husqvarna and you have to buy a generic hitch. the one I used is really solid, no flex or bending and I have been pulling large piles of stuff around every weekend. I was happy to share my adjustment to the kit on UA-cam . so many other people have helped me on projects I wanted to give back. Don P
I used a 12" long piece of 4" angle iron and sandwiched the frame between the angle iron outside and 1/4" plate inside the frame. Seems quite solid.
How are you liking the TS 354XD I'm thinking about buying one soon.
I'm really happy with it. I've only done two weekends of brush burning with it since new and have not cut a blade of grass with it yet but with the locking differential I was able to pull big logs around just with a rope and the hitch. Also the big tires are pretty easy on my squishy springtime back yard.
@@donaldpurcell5243 awesome. I'll be picking mines up this week. 👍
Love it!