Відео

Any help.. my canister filter is full but it isn’t sucking any water through

Is there a tank size limit for this?

In the description it says “1 bubble every 5 seconds etc” but that means it can be used with a bubble diffuser ? If so how? I have the set. I’d like to have a bubble diffuser but not sure how you’d use with these sets? Thanks

I just purchased the Innovative 50w Helio PTC Smart Heater, and plan on installing in into my 14” gallon Coralife Biocube and wanted to know which compartment in the overflow should I place the heater and censor in for the best results?

Hi, all I did was move my fish tank from one room to another room and I primed my 107 and 307 and now they’re not working and I primed them 😪🐠🐠🐠🐠🐠

I think that Salifert test is ok for KH. For PO4 (ulr) and NO3 testing( hr) I recommend HANNa checkers ( HI736, hi782)

Does this test kit work for fresh water? I have some very black algae in my tank, and I also keep snails and have noticed that over time, my snail's shells tend to erode. I didn't know that alkalinity played a factor in their shell health or the growth of algae, but am very interested in this kit now if it will work for me. I currently use strips, and for the PH and KH in particular, I don't feel give very accurate readouts. Also looking forward to the next vid, cause if I've got a KH problem, I would love to know how to fix it!

Wow. Lifesaver. Thank you for posting this. I was about to toss the 407 out when the priming pump plunger snapped off.

🤮🤮🤮 it worked! Now using mouth wash

I cant get it to connect with my wifi, so ive been using hotspot how do i get it to connect?

Non si apre cosi... si tira verso il basso le stesse maniglie di sgancio. Vedi l'istruzione prima che si rompe.

No it’s not good practice at all emptying shop water in your own tank

I was always told not to empty the water from the transfer bags into the tank with the new tank members. They said it was not good to put that water from the place where you bought the new tank members into your water because you could be putting ich or a virus into your tank. I noticed you put the water with the snails into the tank. Is that something that is okay to do?

You must be a beginner, sir if you took that top off like a beginner would

When taking the top off as you do is pushed down on the two gray levers push them down pull the tap off. Do not have to rip the top off like that.

I think you should be able to change color on the lightbar as well, IMO.

i scored a brand new biocube 16gallon for $40 as it was missing return pump, I so love biocubes. great video

Unfortunately they soo overpriced now

T started with a biocube coralife was so happy with with my Biocube HQI metal Halide they sent me the 14 & 6 gallon back in the day. I also had the normal 29 biocube switched to retrofit led everyone was doing It was my most successful at 17 years

I love my biocube 32 gallon I hope they make it where you can change the canopy of the 32 gallon I would be doing that

I don’t think a it’s enough room for tang?

Thank you so much, my primer got stuck so I might need to order a replacement or get some lubricant for it. I didn’t think it would actually work, but I’m hoping I don’t get any diseases from the water that just entered my system because I accidentally swallowed some.😢

For a 40-gal breeder what do you guys sell with a tidal type of feature (DC pumps.) Something that can be sync'd or is that not really needed? I just want the LPS to sway and not just kind of vibrate and swirl around in the middle of the tank. Also, if they are alternating does each one need to move a little more water than two shooting at each other in the middle of the tank?

Would one of the 36" Fluvals work in a 40-gal breeder for LPS, or do I need to go with two from the start? With two, is it enough light for SPS (way down the road.)

Non si apre cosi... Ruschi di rompere la testa. Si apre sganciando le maniglie e fare pressione su di esse e la testa si alza sola e si apre... Se fai così ti durerà poco che si spacca. Guarda le istruzioni e illustrato...

Seriously, thank you you just saved me $15-$20

Ummmm u literally made my night and my giant loaches night! Shoot, you made our whole week and year! I was getting so pissed off tonight. Seriously appreciate you more than you know! A lifesaverrr

Thank you heaps for your vid! Going to try this on my canister filter... I have been having trouble getting all the air out of the canister and it's been a bit noisy ❤

I’m excited to follow along!

I did exactly like you did. After a day of running my filter I got cloudy or murky water. I don't know why

I messed up and plugged in my filter too soon. It is now making a lot of noise in the canister. I unplugged it.

The most help and also understanding of how it works now. I just made sure the valve was closed as I filled the intake and then opened it and voila! You’re a life saver it’s been days of trying to get it to prime. The primer is essentially useless even though I replaced ut

Thank you SO MUCH for this video!!!! What a HUGE HELP! ❤🙏

Opening that top like a rookie

Now that you have taught me to manually prime my canister filter. My day is going great! Thanks for the lesson. 😊

Thanks for the video!

annoying banner

This actually worked 😊 Thank You.

This worked Thank you so much the end part is the one that finally got it to work

Hi do3s anyonr know if the 307 impeller fits the 306

片中人沒用開FLUVAL圓桶？，打開圓桶咁暴力，本身好輕鬆搞到好辛苦😅😅😅，濾材未洗乾淨又放回桶😂😂😂

Tried all this and still not pumping :(

And you use any other diffuser accept the one they gave u??

Very good!👍

I have this problem with a brand new Fluval 307

had to do this today..... yes i got a mouthful

I Don't see co² bubble...

Thank you, broken primer tip saved me tonight

So if i want to use, i just press it??

Jaron is so babygirl in this