- 4
- 13 260
RAY RAY
Приєднався 28 лип 2020
Відео
#sassyandie FACES IN 20 SECONDS
Переглядів 374 роки тому
#sassyandie just goofing around... Please LIKE, SHARE and COMMENT on your answer. Thanks for watching...
The Real Boss Bebe Gurl #sassyandie
Переглядів 1084 роки тому
Please Like, Share and Subscribe and follow us at #sassyandie... Thank you for watching!
IS300 P1120 &P1121
Переглядів 12 тис.4 роки тому
How to change Throttle Position Sensor and Accelerator Pedal Sensor
To much work for that sensor
it does!
Hey I am getting p2121 after replacing APP sensor any suggestions plz ? Car goes into limp mode once RPM reached 2.5 or 3
it might be a bad sensor. And I changed my TPS and APS the same time.
Did you have to do any calibration of TPS or APPS? And do you think this repair would be similar on 2000 LS400?
I didn't have to
Fuck no….my power steering is in the way.
My car died going up a hill, stuck in limp mode now. Got a code for p1121. I replaced the tps and cleaned the maf sensor still didnt fix the issue, i have the app sensor on the way hopefully it works afterwards, fingers crossed🤞🏽
Good luck! But it should do it! Let me know.
@@UpYoRzzzThanks bro! Forsure I will, I miss driving my gs lol
@@UpYoRzzzupdate, we installed the apps and it went back into limp mode while driving 🥲, any suggestions? -Just scanned it and got code p1128 (throttle control motor lock)
It could be bad TPS. Coz it came from P1121 then now 1128. Or you have to disassemble your Throttle body and try to see whats causing the motor lock. It might need some cleaning or worst that might need to replace.
@@UpYoRzzzyeah bro im just going to replace the throttle body motor soon, I just need to order it this week. Either that or look for a throttle body and just replace the whole thing, but I replaced 2 sensors already so im just curious at this point. But I’ll keep you updated man I really appreciate you replying!!🤝🏽
So what happens when you replaced everything on the throttle body and it’s still doing the same thing
Still giving you same error? If it does, new part you put in might be defective.
@@UpYoRzzz I’m thinking it might be the ecm
@@UpYoRzzz showing code p1120 and p1755
@@Richierich1285 If it still showing after reset, I'm think maybe your Throttle Position Sensor is bad. And as far as P1755, Shift Solenoid needs to be replace. This causing your gear not to shift.
The throttle body does not need to be removed to replace the app sensor or tps. I was curious on why there are videos out there that say to do more work then necessary. I just did it without removing the tb in less than 20 minutes.
they do it cuz of limited space to remove screws can I ask how you do it as I don't wanna take everything out
How did you get the bottom screws off. I think that’s the only reason why the whole throttle body has to come off is because no one can get to the bottom screws.
@@wsmaga I guess it depends on the exact car but mine has 4 screws, of which 3 can be removed but one is impossible.
Does APPS have a different name? My parts store says my 2002 is300 "is not equipped with one" and they dont have it under throttle body lever sensor either.
I tried searching it and this what came out. www.partsgeek.com/vz2v265-lexus-is300-throttle-position-sensor.html?YN&PartsGeek+Google+Base&+Lexus+IS300+Throttle+Position+Sensor+Aisan+W0133-1739339+01-05+Lexus+Throttle+Position+Sensor+2002+2004&fp=pp&gbm=a&cid=18313611776&gclid=CjwKCAiAxvGfBhB-EiwAMPakqshIvVflMQvNYbRqU6QFuieV5RPbphqRqcHxmbi7deSLq-K7qxmNChoCcpcQAvD_BwE
getting the same two code on my 99 2jz-ge vvti sc300, you think its about the same?
They are the same error.
Hey, do you know the name of that 3rd hose. The one on the firewall side of the throttle body? Need asap🙏
Is it the one shaped like ‘U’?
So is it better to buy a used throttle body with all the sensors or just replace the 2 sensors ?
You can go and buy a used throttle body but you don’t know the working condition of the sensors. And if they are good, how long are they gonna last? The mechanical side of the throttle body is mostly bullet proof. It’s the sensors that go bad.
@@franklinurrea8033 so should I replace my sensor and which ones should I switch out
@@sethtuller1922 I recommend to replace just both sensors.
@@sethtuller1922 i just fixed my GS300 today. I had the P1120/P1121 codes coming on. Replaced the APP sensor and TPS sensor and didn’t work. I replaced the IAC motor and fixed the issue for me.
@@franklinurrea8033 nice man ! I just ordered me a new tps and app should be coming in soon will get back to you if I get it fixed !
Be better with actual I try too. Instead of half blurred video.bro I was I interested till I could not figure out what you are doing. Thank you
Facts, cannot see anything.
Is there any special install procedure if I’m only replacing the accelerator pedal position sensor?
There’s none. You pretty much have to do the whole process except for the replacing the other sensor. Have fun!
@@UpYoRzzz thanks
@@BassKing916 welcome!
I'm doing this project tomorrow did you have to replace any gaskets?
Hey! Sorry for the late reply. I hope you didn't have to replace any gasket. I didn't.
@@UpYoRzzz I actually didn't have to take anything off to replace the sensor. I just took the sensor off and replaced it. The only thing you can have trouble with is there is a guard around the bolts. you have to pry this a little so you can get a socket or wrench on it. took me 10 mins once I figured our the guard on the bolts. And I am no longer getting limp mode, 2 days in.
@@westparleyyeah im in limp mode rn, app sensor is on the way should be here soon. Hopefully that fixes my issue
This job is slightly bigger than what I have left for daylight right now. But this is going down tomorrow. Hopefully I get this done under 5 hours lol thanks for the post
Work should be less than 5hrs. I would say 2-3hrs.
Hi, where did you get the parts from?
@beachplease808 I had nothing around me at the time except a Napa auto parts. But I came back the next day and got my car situated.
Hack!
Question. Did your lexus is300 at some point at a stop sign or red light you would give it a little gas and it wouldn't go? You would have to floor it all the way in order for the car to go. mine did this and mechanic said to replace the whole throttle body.
Yes, it's about the same issue. It does that most of the time and sometime even when it's running. You don't need the whole throttle body. I recommend have your car run the error codes. Then if you have the same error you just need to replace both sensor as shown on my video.
My car is doing the same thing
@@bnice4629 I hope you find my video useful if you're doing the job yourself.
@@bnice4629 its easy i did it myself. I haven't had any problems since then
I am experiencing a similar issue. Pressing the accelorator and no throttle. Have to floor it to begin going. P2121 error code. The throttle motor sensor that has two bolts in front was replaced. As well as the accelorator throttle sensor connected to the cable. Car ran fine for 30 min. And issue returned. Any tips what to do next?
Que parte es la del codigo p1121
sorry, english only.
nice hat
How did you calibrate the tps sensor?
No need to calibrate. It's plug and play
TPS is NOT plug and play. It must be calibrated between .6 and .7v with a multimeter or measured with an advanced obd scanner that can see throttle position
@@nova0954 sorry just saw this mesaage. For mine, I didn’t have to. It didn’t gave me any error after installing both sensors.
what happens if you don’t calibrate?
Hey . I have a manual is300! I have the same code p1121 Accelerator Pedal Position Sensor Range/Performance Problems. (That’s what the scan says exactly). I randomly lose all power and push the gas all the way down and no power. Was this the same issue you had and which sensor should I replace (still both?) and where do I buy the replacement.
Yes. Thats the same issue I had. I had replaced both sensors in the video. No issue since then.
@@UpYoRzzz Thanks ! Btw do you know what the part for the APPS is exactly. I’m trying to buy it ASAP but can’t find it.
@@franklin9736 you'll need APPS and TPS. www.rockauto.com/?carcode=1363520&parttype=5136 www.partsgeek.com/t2wc4bn-lexus-is300-accelerator-pedal-sensor.html?gb=pp&cid=28884375&aid=4168799362&kid=1100003048743&msclkid=24d0c74c47a317ae91dd98a958eb9b01&Shopping%28BSC%29&Lexus& APPS is pricey when you buy it new. I got mine over at the junk yard Pick n Pull for $15. GS300 and IS300 engine are the same. If you can't find IS300 parts, look for GS300.
@@UpYoRzzz Thanks!
@@franklin9736 welcome!