- 55
- 238 341
Dan's Performance Parts
United States
Приєднався 27 лют 2015
Welcome to Dan's Performance Parts UA-cam channel. We are committed to offering our customers the best customer service available with over 24+ years of experience in the VW parts industry. We pride ourselves on providing you with the most comprehensive product line of parts for the VW air-cooled, Classis Beetle, Off-road, Sand car, Drag car, Manx and Dune buggy enthusiast. We are uploading tons of Tech and How-to-Videos as well as racing videos and customer rides videos. Subscribe to our channel and check back for new videos.
Empi Single Pedal with Single Master Cylinder
Dan's Performance Parts is proud to offer Empi's hydraulic single pedal assemblies!
This single pedal assembly features a cast aluminum mounting base that is fitted with a high grade pedal shaft and hardware that will connect the jig built chrome plated pedal arm to the assembly.
This aluminum base also provides a solid foundation for the master cylinder connection as well.
The versatility of the single pedal assemblies allow them to either be floor mounted or hung from above by just simply rotating the master cylinder 180 degrees on the assembly.
If you pair this single pedal assembly with Empi's other single pedal with dual master cylinders, it will give you a complete versatile pedal package that is totally custom for the way you like it!
Check out all of the single pedals at the links below.
Emip Single Pedal with Single Master Cylinder
dansperformanceparts.com/single-pedal-assembly-polished/
Empi Single Pedal with Dual 3/4" x 7/8" Master Cylinders
dansperformanceparts.com/single-4-wheel-brake-dual-master-7-8in-brake-3-4in-brake/
Empi Single Pedal with Dual 7/8" x 7/8" Master Cylinders
dansperformanceparts.com/single-4-wheel-brake-dual-master-7-8in-brake-7-8in-brake/
Empi Cast Aluminum Throttle Pedal
dansperformanceparts.com/angled-gas-pedal/
Empi Billet Slave Cylinder
dansperformanceparts.com/empi-clutch-slave-kit/
----
Contact Info
Dan Emery
Dan's Performance Parts
(760)751-0718
www.dansperformanceparts.com
This single pedal assembly features a cast aluminum mounting base that is fitted with a high grade pedal shaft and hardware that will connect the jig built chrome plated pedal arm to the assembly.
This aluminum base also provides a solid foundation for the master cylinder connection as well.
The versatility of the single pedal assemblies allow them to either be floor mounted or hung from above by just simply rotating the master cylinder 180 degrees on the assembly.
If you pair this single pedal assembly with Empi's other single pedal with dual master cylinders, it will give you a complete versatile pedal package that is totally custom for the way you like it!
Check out all of the single pedals at the links below.
Emip Single Pedal with Single Master Cylinder
dansperformanceparts.com/single-pedal-assembly-polished/
Empi Single Pedal with Dual 3/4" x 7/8" Master Cylinders
dansperformanceparts.com/single-4-wheel-brake-dual-master-7-8in-brake-3-4in-brake/
Empi Single Pedal with Dual 7/8" x 7/8" Master Cylinders
dansperformanceparts.com/single-4-wheel-brake-dual-master-7-8in-brake-7-8in-brake/
Empi Cast Aluminum Throttle Pedal
dansperformanceparts.com/angled-gas-pedal/
Empi Billet Slave Cylinder
dansperformanceparts.com/empi-clutch-slave-kit/
----
Contact Info
Dan Emery
Dan's Performance Parts
(760)751-0718
www.dansperformanceparts.com
Переглядів: 193
Відео
Empi Pedal Assembly
Переглядів 21710 місяців тому
Dan's Performance Parts is proud to offer Empi's hydraulic buggy pedal assemblies! This pedal assembly features a cast aluminum mounting bracket, for a solid foundation! They feature quality high grade shaft and hardware, that connects the jig built chrome plated brake and clutch pedals to the assemblies. The master cylinders aluminum casting is machined to exact tolerances to make these assemb...
Jamar Buggy Pedal Assemblies/ Made in the USA
Переглядів 94810 місяців тому
Are you looking for the best hydraulic pedal assembly on the market today? Something made in the USA, and is built with top quality parts? Dan's Performance Parts is proud to offer Jamar's hydraulic buggy pedal assemblies! These pedal assemblies are built on a solid foundation by machining a solid chunk of 6061 T-6 billet aluminum, to create the main frame that everything is connected to. The b...
Empi Buggy Pedal Assembly
Переглядів 27010 місяців тому
Dan's Performance Parts is proud to offer Empi's hydraulic buggy pedal assemblies! This pedal assembly features a cast aluminum mounting bracket, for a solid foundation! They feature quality high grade shaft and hardware, that connects the jig built chrome plated brake and clutch pedals to the assemblies. A shaft pin to stop the shaft from rotating within the pedal base is included, along with ...
Empi Black VW Alternators
Переглядів 21311 місяців тому
If you're looking for maximum charging power with unmatched reliability, or you're just looking to dress up your engine compartment with a black modern look, these Empi black alternators would be an excellent choice! Please be sure to check out all of the Empi Black alternators, at the links listed below. Empi 90 Amp Black Alternator dansperformanceparts.com/empi-90-amp-alternator-black/ Empi 7...
Empi Stainless Steel Buggy Dual Exhaust
Переглядів 1,4 тис.11 місяців тому
Due to popular demand, EMPI took their most popular buggy dual exhaust system and redesigned it to be compatible with any of their dual carburetor systems. Built Using 304 Stainless Steel, 38mm Tubing and Heavy Duty 9.5mm Flanges for Strength and Durability. This TIG Welded System is Built to Last! And an EMPI Badge is Fitted to Complete That Custom Look! Fits 1200-1600cc Engines. Gaskets and H...
Empi 36 Horsepower Style Fan Shrouds, Doghouse Fan Shrouds
Переглядів 1,1 тис.Рік тому
dansperformanceparts.com has Empi's 36HP Style Fan Shrouds, that feature excellent, tight fit and finish along with correctly engineered internal baffles. Doghouse models feature 9 internal Air Directional Baffles/Veins and use late model Doghouse oil cooler and the larger late model fan and special tin. All Doghouse models have the hole for the throttle as well. Black 36HP without Ducts danspe...
Empi VW Air Cooled Replacement Wiring Harnesses
Переглядів 1 тис.Рік тому
Dan's Performance Parts has taken the grief out of re-wiring your next project with these new Empi wiring harnesses! The engineering team at Empi has created an all new, high quality reproduction of the O E factory German wiring harness, with all the correct color coding, plus it's ready to install right out of the box! So, if you're in the market for a factory level wiring harness, but looking...
VW Type-1 Rear Drum Brake Kits
Переглядів 429Рік тому
Dan's Performance Parts now has Empi's rear drum brake kits available! Empi's Rear drum brake kits are packaged with all of the necessary components needed to service your vintage air cooled Volkswagen rear drum brakes. Empi assembles these kits at their southern California warehouse with all new high quality components, for optimum stopping power. We carry four different rear drum brake kit co...
Empi Big Bore 25mm Disc Brake Master Cylinder
Переглядів 552Рік тому
Empi's Big Bore master cylinder is the Perfect upgrade, for when you're adding Wilwood disc brake calipers or Any 4 piston aftermarket disc brake calipers, to your air cooled type one VW. With its 25 millimeter bore, more brake fluid moves to apply additional volume to all four corners for increased stopping power with a firm pedal feel. This unit will bolt right up to the stock pedal set up an...
VW Tpye-1 Front Drum Brake Kits
Переглядів 495Рік тому
Dan's Performance Parts is now carrying Empi's new front drum brake kits. The front drum brake kits are packaged with all of the components needed to service your vintage V W air cooled front brakes. These kits are assembled with all new, high quality components, for optimum stopping power. There are 7 different front drum brake kits available, depending on your model and year. All of the Front...
AS41 Magnesium Stock VW Engine Case
Переглядів 3,2 тис.Рік тому
All New AS41 magnesium engine cases are now available once again!! These universal, dual oil relief engine cases are the latest AS41 magnesium alloy version, and is the perfect choice for stock 1500-1600cc engine case replacement. You can also modified these cases for hi-performance and racing applications as well. These new magnesium engine cases are made in Brazil, and weigh approximately 25 ...
Empi Color Matched VW Pulley Kits
Переглядів 512Рік тому
Check out what's new at Dan's Performance Parts!! Empi’s new colored matched aluminum Pulley Kits. Made from high grade aluminum and CNC machined for a Precision fit. Each colored pulley features a unique design pattern, machined into the pulley face, for an awesome contrasting finish. Kits are available in Red, Black or Blue finishes. Designed to fit all Type-1 engines from 1961 through 1979, ...
Empi 75 AMP Chrome Alternator Kit with Chome Components
Переглядів 334Рік тому
Replace that old 12 volt VW generator set up, with an all new, high-charging Empi Chrome alternator conversion kit. This alternator conversion kit with chrome components will come complete with an new Empi Chrome Plated 75 amp alternator, that has a built in voltage regulator for easy installation. The conversion Kit will also include a new chrome aluminum alternator stand, new alternator strap...
Empi Alternator Kit with Chrome Components
Переглядів 173Рік тому
Replace that old 12 volt VW generator set up, with an all new, high-charging Empi, alternator conversion kit. This alternator conversion kit with chrome components will come complete with an new Empi 55 amp Alternator, that has a built in voltage regulator for easy installation. The conversion Kit will also include a new chrome aluminum alternator stand, new alternator strap, V-Grooved belt, Ch...
Empi Alternator Conversion Kit / With Belt & Pulley
Переглядів 1,3 тис.Рік тому
Empi Alternator Conversion Kit / With Belt & Pulley
Empi Alternator Conversion Kit / (Basic Kit)
Переглядів 1,7 тис.Рік тому
Empi Alternator Conversion Kit / (Basic Kit)
Empi "Beam In A Box" VW Ball-Joint Front Beam
Переглядів 5 тис.Рік тому
Empi "Beam In A Box" VW Ball-Joint Front Beam
New Empi HEI Ignition Kit for VW Air Cooled Engine
Переглядів 1,9 тис.Рік тому
New Empi HEI Ignition Kit for VW Air Cooled Engine
All New Empi Long Block Air Cooled Replacement Engines
Переглядів 24 тис.Рік тому
All New Empi Long Block Air Cooled Replacement Engines
Empi / Wilwood Rear Disc Brake Kit for Air Cooled VW Beetle / Bug
Переглядів 2,8 тис.Рік тому
Empi / Wilwood Rear Disc Brake Kit for Air Cooled VW Beetle / Bug
Empi VW Super Beetle Front Disc Brake Kit with Wilwood Calipers
Переглядів 911Рік тому
Empi VW Super Beetle Front Disc Brake Kit with Wilwood Calipers
Wilwood 2 Piston Caliper / Empi Ball Joint Front Brake Kit with 4x130mm Rotors
Переглядів 167Рік тому
Wilwood 2 Piston Caliper / Empi Ball Joint Front Brake Kit with 4x130mm Rotors
Wilwood 4 Piston / Empi VW Ball Joint Front Disc Brake Kit
Переглядів 477Рік тому
Wilwood 4 Piston / Empi VW Ball Joint Front Disc Brake Kit
Wilwood 2 Piston Caliper / Empi Front Disc Brake Kit for VW Link Pin with Drop Spindles
Переглядів 617Рік тому
Wilwood 2 Piston Caliper / Empi Front Disc Brake Kit for VW Link Pin with Drop Spindles
Wilwood 2 Piston Caliper / Empi Ball Joint Front Brake Kit with Porsche & Chevy Bolt Pattern Rotors
Переглядів 674Рік тому
Wilwood 2 Piston Caliper / Empi Ball Joint Front Brake Kit with Porsche & Chevy Bolt Pattern Rotors
Dan's Performance Parts Racing 2013 Lake Elsinore Lucas Oil Off Road Pro Buggy Race
Переглядів 6349 років тому
Dan's Performance Parts Racing 2013 Lake Elsinore Lucas Oil Off Road Pro Buggy Race
▶Dan's Performance Parts Presents......Empi's Dual HPMX Carb & Linkage Combo Kit Installation
Переглядів 13 тис.9 років тому
▶Dan's Performance Parts Presents......Empi's Dual HPMX Carb & Linkage Combo Kit Installation
Dan's Performance Parts presents.. Empi Disc Brake Installation Video
Переглядів 24 тис.9 років тому
Dan's Performance Parts presents.. Empi Disc Brake Installation Video
Anyway to adjust the backlash on this unit?
There is not.
Great information! Thanks.
Glad it was helpful!
Have you tried the 90 Amp version?
We sell the 90+ amps alternators separately, we don't have them in a kit. dansperformanceparts.com/empi-90-amp-alternator-black/ dansperformanceparts.com/empi-chrome-90-amp-alternator/ We do sell a 75 amp kit, dansperformanceparts.com/chrome-alternator-kit-with-chrome-parts/
price and availability in canada
Sorry, we don't ship the beams to Canada.
I’ve looked on your website the bumper is not on there
We are temporarily out of the bumpers. We should have them back in stock by the end of the year.
is there a version available catered to Baja Bugs? It would be nice to be able to get one that has the wider beam, adjustable and lifted spindles...
We have front suspension kit available for Baja's on our site dansperformanceparts.com/vw-front-and-rear-suspension-kits/?filter_suspension-type=front
@@dansperformanceparts AWESOME, THANK YOU FOR THE LINK...
Cool 😎 2023
Nice nice nice
Thanks
You just sold me. What a great looking Kit 🤟🏼🔥
On GM cars they went to HEI to get rid of points floating because of shaft bushing wear . this looks like a good product .
How many hp this ?
These engines have stock components so should be the same as the original engines. You will get a little more HP out of the 1776 and 1914cc but it will still be determined by the carburetors and exhaust you run.
where can I buy front A arms to transform my buggy from beam to A-Arm?
You could try a-arm.com . I believe Allen is still making bolt-on kits to convert to a arm.
Hi, can I use those calipers for an empi kit 22-2905-0? Thanks
Unfortunately, we do not sell those calipers separately. The supplier will not split them from their kits.
Can you send the calipers separately?
Sorry, we can't get the rear Wilwood calipers separately from Empi
I would like one some day.
1600 price
All the links are in the description that will take you to our web site and you can find the prices there.
Any Type 4 stuff for 914s?
Sorry, only type 1 & 3
Aluminum preferred for performance applications but it's always nice to see original materials. Good job
Great information Dan! Thank you!!!
Glad it was helpful!
60 degree work on tractor pto for bush hog?
Sorry, these u-joints are for steering or lite duty only.
Do you have a picture of one installed?
We do, If you send an us a email, I can send you some pic's dan@dansperformanceparts.com
Hey Dan - It's been a long time since I first set you up as an EMPI distributor. It was controversial at the time because you were the first online-only distributor with no storefront. I believe it was very late nineties or 2000 when you started. You have obviously been a great success so congratulations are well deserved! Mike
Hi Mike, Yes, It has been a awhile. How have you been?
Willwood calipers
dansperformanceparts.com/vw-wheel-cylinders-brake-calipers/?filter_brand=wilwood-vw-brakes
How to order
Dan do you have dropped kombi spindles with 0offset
I can get 1968 - 1979 2" drop spindle however they are not on our web site at this time.
Does this company still exist
We sure do dansperformanceparts.com/
Hi, do you know the weight of this body
It's around 160lbs
Sounds real nice!
I have 930s on my 500hp ls sand rail and want to upgrade to 934s what all would that Intel is it just swapping the cv's and shafts or is there more to it
Lot more to it you need to change the Trans side plates and the drive axles and the 934 are double the price
Yes! No black grease to make it impossible to see what's happening, or to make me wish I had not started the job. Why do so many DIY people not bother to get rid of all grease before attempting to explain cv's ? Some of these people look like they work in a coal mine - even before the start the job. Show pride in work!
if you did this for aliving then you could understand eating a sandwich while working with the other grease doesnt kill but it sure as hell shows a working man from a wanna be
can i add a gooseneck ? to put it under my box truck
Do you build custom fiberglass bodys? Also would you have any closed can Manx body's
Thanks for taking the time to do this. Information on these racks are really hard to find. It would be really great if you could do and overview of the other racks you sell as well. Do you have any racks that have more than 3.5" of travel?
I was told you don't need the axel clips at the end if you have race axles so how many degrees do you get from this. And I want some 944 cv's
do they make a unit for super beetle or early for street use?
Im working on a project of turning an atv 4 wheeler into a side by side... I wanting to mount one of these infront of the driver side and only use one side of the rack tie rod and attach it to my old steering shaft where the handlebars use to be. Or is that to much pressure on one tie rod to push and pull the old steering shaft? If i were to mount this correctly, down low and in the center of my project using both ends hooked to my wheels. What stops the wheels from cutting to sharp? My original steering shaft has stops on it, thats the only reason i was going to cheat and hook one end of it up high and to to my handlebar shaft.. Any info will be greatly appreciated
I'm building a buggy. The shifter is way forward to the drivers seat. It needs to come way back. Can I use this box and CUT that factory rod that goes to trans? Or do I need a new Rod?
I cut the rod in mine , shifter working great. I would highly recommend it.
Thanks this is great
I own that green limited buggy, I'm from Mexico, still running great
How do you make it for the one with a tripod on a side and 6 balls on the other side? I need to align them on my a3 2005
Could you connect the spline side of the joint directly to the rack and pinion or do you need another part like a coupling for that?
Yes, the u-joint could be used that way.
Aluminum??? Shouldn't tie rod sleeves be steel??? Aluminum sounds a little weak to me. I'd be afraid they would bend going over a curb, etc.
These are made for off-road ues and design to bend if you hit a rock or have a crash, to save the rack and pinion or steering box, however they are evry strong and it's the only tie rod we ues in our off-road race cars.
@@dansperformanceparts Aluminum comes in many strengths. A 5056 T6 has a yield strength of about 35,000psi to 50,000psi which is about the same as SAE 1010 steel. Tie rods are not usually high strength steels. I don't work for Dan's. I'm a really old, pre communist, metric system, stress analyst from Fordza down by the Rouge (raw material in, finished products out and enough air pollution to choke a horse) in Dearborn, MI.
Got one i love it
I have one on my Dune buggy i love it
Scott Rens How hard is it to install? Any information would be appreciated. Thanks
The shifter box is made to be welded to 1-1/2" tubing. Then the rest of the installation is the same as a stock VW.
Is this something that one would want to do on a VW bus with stock suspension?
With stock suspension it's not so critical.
Good to know I have a stock Bus (86) as well and have changed mine before never knew this.
@@dansperformanceparts Not critical but better and recommended.
Great video.....I use a paint ball marker and mark a line across the axle so I get CV clocked on same spline.....the mark also serves the purpose of telling me if I've twisted an axle with a simple visual inspection.
thanks for the video, is there a name for this type of cv?
can this be used for road legal reverse trikes?
underfloor heating installer probably not depends on your setup
Sorry, It's made for off-road only