- 5
- 50 104
Squatchy McSquatchsquatch
Приєднався 2 кві 2014
Відео
HOW TO SOLVE SUMMER CURIOSITY BOX PUZZLES!
Переглядів 2593 роки тому
Clam Kenai Pro Thermal customization. Super-duper hole hopper!
Переглядів 48 тис.3 роки тому
Attempting to drift the Missouri River
Переглядів 61610 років тому
Didn't figure there was much of a shot, but had to drift anyway so figured I'd try something I never had tried before. No fish caught, couldn't tell the difference between a bite and a snag if I got any bites. But I always wanted to try it anyway so at least I got the chance.
How to tie a Snell knot
Переглядів 12110 років тому
Best Snell knot I've found. Simple to tie and solid.
Awesome video!!! Amazing mods and also what did you have for a power auger?
You kept me entertained the whole time!! Awesome job explaining it all, lots of good info!!
Nice job! I also did the magnet wind flap mod to mine. I have the advantage of pulling mine with a snowmobile, so harness and anchors are not an issue. Shack stays connected to snowmobile. Eskimo seat intrigues me, but how important is swivel mod? I use a ram ball mount on that Clam tray, to move my GPS/sonar from sled to shelter and back. I use a different heater, but my buddy uses a buddy heater and usually provides me with soup, brats, etc., so I will buy the commercial cooking plate and gift that to him. We typically fish our 1 man shelters in Canada for lake trout. When I connect with a trout, I can simply flip my shelter back and easily fight the fish. Keep the videos coming!
Good idea!
Those are great modifications. How do you load it for travel by yourself?
Really nice mods! I especially liked the ski mounts, magnet pan holder and the seat mods. I'm going to use those ideas, thank you! How much does your rig weigh?
Okay so how did this work out in the end?
I've been considering putting my heater inside my tub. I have a way bigger flip over shack. Jw how is the heat being right beside you in the shack?
Great video man! What we do for a fish hey!
Hey great video with really cool ideas, I have the old Clam one man and I will be using some of your ideas. Thanks
Roll you window flap up & use 2 spring loaded closeplns works great ! Can put it any height you want it. Jim
Hope your doin well and enjoying some ice fishing this winter!
I know this is years old at this point, but dang man! This is epic! Really like the built in skis, but looks like it took a long time to figure out the hardware to mount them and everything. Are those just old used downhill skis?
That ski trick was awesome
Thx for the video...great ideas to pick from. The Gospel of John, when you're ready.❤️
Great video..! Thanks for sharing. You probably know that you can use the buddy heater guard to heat food on, just have to pop it off and reposition it. Of course you can't catch the grease🤣
Really great ideas bro! And yes the clam zipper are crap! Idk why it’s so cheap! I have like 3 broken zipper on my hub! Both doors and the bag!
Getting a kenia soon, and this video is spot on for tricking it out. Great mods man, thanks for sharing with the youtube world!! Rip lips, and fish on!!!
Not bad! I got rid of drafts on my tents, they make an anti-wind skirt whole, without tearing at the end of the sledge. Greetings from Siberia!
I'm going to be doing the magnet trick as the wind chill here right now is CRAZY cold and I'm sick of shoveling snow to seal it
Thanks brother! Appreciate the content
I love the tip ups great ideas thank you
Best list of solo shack mods I've seen! Awesome and thanks!
The only thing you could do is put pvc poles that extend out from the frame to the canvas on both sides of the door. You can do the same on the back corners. This helps keep the canvas from flapping in and out on windy days. Also gives you more room.
hi can u send me the name to buy the anger holder and where can I get it Thanks
My wife is my anger holder... lol. I'm thinking you're talking about the rod holders I have attached to my auger mount brackets? If so, they are just the standard Otter brand rod holders that I modified with a hammer and a vice until they were in the shape I needed to fit.
Great video going to steal some ideas!! Tip uuuuuppp!!
Only thing missing is the bed. You could stay all weekend in that shack with a bed lol. Your like me, if they don't have what i want i build it. I have made my own custom lures that work great because they made them many years ago and no longer do. As i say work smarter not harder. Make things that make your life a little simpler!
If you had to guess... How many hours do you think you get out of that small tank and the buddy heater??
Hey squatchy, where did you get that pan for the mr. buddy? What’s it called exactly so I can find one
Alluminum is a lot lighter than all that steel and no rusting
You are correct. If I used it where it wasn't actually necessary, it's because I had scrap steel. Not a lot of scrap aluminum in my shop. In cases like the seat base and auger rack, its for strength. Other strips are there so I can use magnets on them since aluminum isn't ferric. The places where I've used it where it wasn't necessary probably added 2 lbs to the build so I'm fine with it. But yeah, I agree with ya.
Why an eskimo seat in your clam?
I wanted the mesh seat. Clam was backordered till the next spring. So I bought the eskimo one! :)
Cool Set up bro
Dude, you need to make more video's!!! In a world of boring A$$ people on You Tube I really enjoyed watching yours. I just ordered my Kenia Pro and came across your video, you have some great ideas that are to good not to copy man!
I must watch too much UA-cam because I accidentally misspoke a few times at the beginning, calling the box these puzzles came in the "curiosity stream box. " That was a mistake. The puzzles are from the Curiosity Box, which is the one promoted by Michael Stevens from Vsauce. My bad.
Great video! You did an excellent job decking out your hopper. Thanks for sharing your ideas, tight lines!
bqfqs vyn.fyi
This was great. Thanks for all the ideas.
Can't seem to find the lockable coffee table legs?
There are no lockable coffee table legs as far as I'm aware. In a coffee table, the weight of the tabletop holds them down. I installed some cheap adjustable cabinet locks off amazon on my sled for when I need to lock the skis in the "up" position.
@@squatchymcsquatchsquatch3015 Thanks ordered parts today
My Kenai Pro Thermal is on the way. Definitely got some new ideas for customizing. Thanks for sharing.
Great video! 😎👍
I dig it man. Idk if you've ever tried searching for this topic before you made this video, but you are my new hero bro. I'm listening to this video for maybe the 5th time today, while finishing up a couple of projects on my Kenai. You answered a bunch of questions that I've had for a couple years now, and gave me gumption to break out the power tools finally. Thanks alot man. You did an awesome job on the video and shanty in my opinion.
That is literally the best thing I could hope to hear about this video. Best of luck out on the ice Ryan.
Man! Great video. I have the kenai stealth and will definitely be using some of your ideas! Using it as a hole hopper is exactly why I got it. Quick question about your buddy heater. With it mounted where you have it, do you worry about it burning the fabric when moving to another spot after it’s been on a while? Thanks for this video! I was on the floor lmao at that Bluetooth notification from your tip ups lol good stuff!
I had the same concern after deciding to locate the heater there. All I can say is that I've had zero problems. I usually shut my heater off 2 minutes or so before packing up and that cools it off plenty. I've skimped on that time frame a few times and still gotten away with it just fine. One of the nice things about a little buddy is that if you put the handle up, you can tuck the fabric behind the handle and away from the hotter part. But still, not near as big of a deal as I originally thought it might be.
@@squatchymcsquatchsquatch3015 cool! Thanks again for this great video and for the quick reply!
Well fricken done brother thank you for sharing
Dude, those ski's though.....I need those.
Why not incorporate the console into the clam tray.....
Firstly because I'm packed in really tight under my tray. From top to bottom on that corner it goes: Tray, battery/battery bracket, ice anchor storage. Secondly when working on the umpteen wires I've got going in and out of the console, I want as much room as possible. I can take a couple faces off the console and basically have open access without disassembling anything structural on the shack. That's not the case with the clam tray. It installs under the hinge bracket so I'd have to take all that off before even getting to my wiring. Lastly, it's another 1/2 a square foot of shelf space I can use. Any way, I think I originally considered doing something like that, but after thinking it through, this way seemed more practical.
I just bought hinges for mine trying to figure out do I put anything the tub
I used some fender washers on the inside of the tub, but other than that no.
Did you use anything inside for the hinge on the ski
just washers. If you sandwich em tight enough the sled is surprisingly rugged.
Great video, great tutorial and the ideas are amazing, well done!
How about using adhesive measure tape on the poles on both sides of the seat to check your fish instead of having to carry a scale or tape measure out on the ice. Or for that mater mark off increments on the poles themselves with permanent marker if it would to the metal.
Hey thanks for going through the trouble of making the video. I really enjoyed it and got a few ideas too!