Відео

yes

@@slingryderz7936 I love you brother. I have watched your excellent video over and over before I install it. I see you have a 12 volt switch. I am stumped on that part. Also, I’m stumped when you stated we can disconnect the speaker wires and run wires to the dsp. Are you saying if I take the speakers out of the box to run the wires from speakers to dsp. There is a connection to plug into speaker.

​@@commonsense5077 To power the DSP and amps, you will need a 12-volt turn-on. You can obtain this from the car's battery and ground. For the 12-volt turn-on, you can tap into a wire behind the glove box of a Slingshot, such as the wire from the cigarette lighter (behind your glove box) This setup will activate your DSP and amps when the Slingshot is turned on. As for the speaker wires, if you are using high-level input for the signal, there's no need to access the stock radio. Simply take the wire that connects to the front left and right speakers, extend it, and connect it to your DSP. This will give you a high-level input signal. Then, connect speaker wires from your amps to the speakers. Does that make sense?

Where do I run the slingshot tweeters?

Can I leave the tweeters as they are? Should I run wires on the tweeters connecting them to speakers wires.

Galaxy Tab S9 FE 5G

@slingryderz7936 thanks fam!

Thanks for sharing

www.cosmiccreations.shop/

prostar*

Glad you like them!

Oh wow!

email me sling.ryderz@gmail.com

@@slingryderz7936 wrote you on that email family

cosmic creations

yes sir a must buy

YES!!! - instant - feels like it hasn't any hesitation now...a must buy

@@slingryderz7936 $160 bucks!! I'm definitely getting one

Much appreciated.. videos coming

get what the stripes?

Yes the led strip lights

@@user-ng1ol2ny7o order from me or cosmic creations

Zarate steel.. info and price in video

Heated seats are a must.. the cooling part is only ok when its not really hot outside.. here in Vegas when is 110..they dont help!

Our pleasure!

I had to use speaker rings because of the depth of the pods

www.amazon.com/3M-Adhesion-Promoter-Clear-Bottle/dp/B094Q4J4VR/ref=sr_1_1?dib=eyJ2IjoiMSJ9.8jEt7rvaPlTDl31ZN0gq3aZExJQNaKm95GIWm3aiFOOEQwcZvLd2ruzNndgAKbyebM2tErhGJgyvyImTLNXkxCYJd5wXxCHcUgc5hR9jxPjW8LXA9iIo3j8MlJQXKvdHji1wsLUpC3kRd_wfEfZ0J_hFwpeVjd3NeNxgPK5E3hQNQmU-yiku6nsfXAO81CpNEGwp8bPWXvAKem6xbLRKK66_rML5ZrO9yONBbkET5oRX5OV1_Vtx1w6hdCAcx9HAH0ox4tXTciBQM_Sp4vsyB6NN59V3eqsniWkds_YRdUM.0movwKixjdBrUcG0cx2g7hu4f4IR8KHeWMr6TS2ByH4&dib_tag=se&keywords=3m+promoter&qid=1721759162&sr=8-1

@@slingryderz7936 good look

ill make a video in a few days

what music.. stock or aftermarket?

@@slingryderz7936 I have the stock radio

no sir,

Bypass this by using a relay or find a key on hot

thank you

Glad I could help

@@raxxxcincy thank you

Yes I do..dm me

Glad you think so!

I'm wondering the same thing. I have no sound on mine I just installed yesterday

You had the wire preran by poloris in back?

What model?

Also what model??

wires already preran in my 2024 S Auto with tech pkg 2 spkrs came in it is n front.

Glad it was helpful!

Yes we can, email sling.ryderz@gmail.com

To change the passcode in a Polaris Slingshot, follow these steps: Turn on the ignition: Insert the key into the ignition and turn it to the "ON" position without starting the engine. Access the Security System Menu: Navigate to the settings menu on the infotainment screen using the controls on the steering wheel or the touchscreen, if equipped. Find the "Security" or "Passcode" option in the settings menu. Enter Current Passcode: You will need to enter the current passcode to access the passcode settings. If you don't know the current passcode, you may need to contact a Polaris dealer for assistance. Select Change Passcode: Once you've entered the current passcode, select the option to change the passcode. Enter New Passcode: Follow the on-screen prompts to enter a new passcode. The system may require you to enter the new passcode twice to confirm it. Save the New Passcode: Confirm the new passcode and save the changes. The system should notify you that the passcode has been successfully changed. Turn off the ignition: Turn the key to the "OFF" position and remove it from the ignition. For specific details or if you encounter any issues, refer to the owner’s manual or contact a Polaris dealer for further assistance.

To reset the check engine light on a 2016 Polaris Slingshot after replacing the knock sensor, follow these steps: Check for Error Codes: Before resetting the check engine light, ensure that the issue has been resolved. If the knock sensor was replaced correctly, the error code should not reappear after resetting the light. Use an OBD-II scanner to check for any error codes. This will help confirm that there are no other issues. Disconnect the Battery: Turn off the ignition and make sure the Slingshot is in park. Locate the battery, usually found in the rear compartment of the vehicle. Disconnect the negative terminal (black) from the battery. Use a wrench to loosen the terminal clamp and remove the cable from the battery post. Wait for about 10-15 minutes. This will allow the vehicle's electrical system to reset. Reconnect the Battery: After waiting, reconnect the negative terminal to the battery. Tighten the terminal clamp securely. Turn on the Ignition: Insert the key and turn on the ignition without starting the engine. Check if the check engine light has turned off. If the light is off, start the engine and let it run for a few minutes to ensure the light remains off. Use an OBD-II Scanner: If the check engine light does not turn off after disconnecting and reconnecting the battery, you may need to use an OBD-II scanner to clear the codes. Connect the OBD-II scanner to the diagnostic port, usually located under the dashboard. Turn on the ignition and follow the scanner's instructions to read and clear the error codes. Once the codes are cleared, turn off the ignition and disconnect the scanner. Test Drive: Take the Slingshot for a short test drive to ensure that the check engine light does not come back on. If it does, there may be another underlying issue that needs to be addressed.

Email me ill send you link Sling.ryderz@gmail.com

@@slingryderz7936just did

same method of the video