- 54
- 74 331
Coffee & Gasoline
United Kingdom
Приєднався 21 бер 2021
Welcome my Turkey Dinosaurs! I'm Martin, a maker, and petrol head. Coffee fuels my crafting of EDC (Every Day Carry) items and metal casting, whilst I get my Gasoline kicks driving my daily #KermitVXR, and working on my project motor #RebelRekord
Bring your positive head, as I don't do negativity, and join the shenanigans!
Bring your positive head, as I don't do negativity, and join the shenanigans!
Cube Overheating | Thermostat & Coolant Flush
The poor Cube overheated (very briefly), so it was time to diagnose.
Little tip, if it gets hot, you can try running the heater on full - this allows the coolant to travel further and dissipate heat... but don't drive while it's actually overheating!
Please wear gloves, goggles, and follow manufacturers guidance. This is how I did it, not how you should!
This was filmed over a few days due to life priorities, so please forgive the choppyness of the video!
Let me know in the comments what you'd like to see next!
Please like, share, and subscribe if you like weird, sporadic content.
You can support directly on Patreon:
patreon.com/CoffeeGasoline
or:
CoffeeGasoline.com
-------------------------------------------------------------------
#jdm #stance #cube #nissan #overheating #DIY #carsofyoutube #nismo
Little tip, if it gets hot, you can try running the heater on full - this allows the coolant to travel further and dissipate heat... but don't drive while it's actually overheating!
Please wear gloves, goggles, and follow manufacturers guidance. This is how I did it, not how you should!
This was filmed over a few days due to life priorities, so please forgive the choppyness of the video!
Let me know in the comments what you'd like to see next!
Please like, share, and subscribe if you like weird, sporadic content.
You can support directly on Patreon:
patreon.com/CoffeeGasoline
or:
CoffeeGasoline.com
-------------------------------------------------------------------
#jdm #stance #cube #nissan #overheating #DIY #carsofyoutube #nismo
Переглядів: 380
Відео
Recharging Corsa E VXR Aircon | KermitVXR
Переглядів 5703 місяці тому
#KermitVXR 's air conditioning was pushing hot air, so I figured you might want to see the recharge process! Very simple #DIY job, enough in these larger cans to recharge a few times, too! Please like, share, and subscribe if you like weird, sporadic content. You can support directly on Patreon: patreon.com/CoffeeGasoline or: CoffeeGasoline.com #Corsa #CorsaE #VXR #airconditioning #car #carmain...
Memento Mori Coins | #ASMR CRAFT
Переглядів 614 місяці тому
A calm, slow, unspoken look at the process of making my batch of Memento Mori Brass coins. Each is numbered, and available to purchase here - Memento Mori can be a dark message for some, but I prefer to think of it as a grounding acceptance. They start life from round metal stock, and go through everything from laser engraving to acid etching! Not many other makers let you see your actual produ...
3D PRINT to METAL! Blue Cast X10 & Elegoo to make skull fidget rollers | #ASMR | #ambient
Переглядів 2626 місяців тому
Workshop Wednesday session, casting metal 'knuckle rollers' (fidget / stim toys) from 3D Printed X10 resin. I designed these a long time ago, and have experimented with various resins over the years, but find Blue Cast X10 to be the nicest so far! I print the specialist wax resins on my old #Elegoo Mars Pro 2, due to the smaller VAT (less resin required... it's pricey!). Then follow traditional...
Making BREAST MILK into crystals and a T Virus Charm / Keepsakes!
Переглядів 526 місяців тому
A friend was having trouble making their breast milk powder into keepsakes, so I offered to do something a little... different for them! The Resident Evil 'T-Virus' vile is from: www.thingiverse.com/thing:4156040 Please consider subscribing, and like the video! Feel free to support me on Patreon, and socials to help grow this venture! patreon.com/CoffeeGasoline linktr.ee/CoffeeGasoline
I made a BRASS SKULL Walking Cane Topper! | ASMR No Speech - Metal Casting
Переглядів 1367 місяців тому
Come chill with me while I cast a solid brass version of my Skull logo, for the awesome Gavin to use as a walking cane topper! I've really pulled back on the editing here, choosing to have no speech, just machine noise and the ambient rain that I recorded in the workshop, during the process! I was aiming for an ASMR vibe with this, let me know if you dig it! The finished piece weighed in around...
Forged ReCirculation Valve Corsa E VXR | KermitVXR
Переглядів 1,5 тис.8 місяців тому
Forged ReCirculation Valve Corsa E VXR | KermitVXR
WorldCoin | 3D Print to Metal in 24 hrs
Переглядів 12811 місяців тому
WorldCoin | 3D Print to Metal in 24 hrs
Plasti Dipped the Cubes Hood, with a roller! Custom paint job
Переглядів 317Рік тому
Plasti Dipped the Cubes Hood, with a roller! Custom paint job
Lowering my Nissan Cube! (Z11) | JDM Stance
Переглядів 2,4 тис.Рік тому
Lowering my Nissan Cube! (Z11) | JDM Stance
Nissan Cube Z11 - Changing from KMh to MPH - Speedo Fascia
Переглядів 501Рік тому
Nissan Cube Z11 - Changing from KMh to MPH - Speedo Fascia
V8 Swap - Transmission Mount | Opel Rekord
Переглядів 477Рік тому
V8 Swap - Transmission Mount | Opel Rekord
Solving 'SERVICE ESC' Error | KermitVXR | Stuck & Broken ABS Sensor replacement! Corsa E VXR
Переглядів 2,2 тис.Рік тому
Solving 'SERVICE ESC' Error | KermitVXR | Stuck & Broken ABS Sensor replacement! Corsa E VXR
I made MARIO style Knuckle Rollers! Gamer style EDC / Skill Toys!
Переглядів 259Рік тому
I made MARIO style Knuckle Rollers! Gamer style EDC / Skill Toys!
KermitVXR gets Remapped! | Corsa E VXR / Opel OPC
Переглядів 1,6 тис.Рік тому
KermitVXR gets Remapped! | Corsa E VXR / Opel OPC
2Dclipse - CARTOON CAR scale Model! | Bringing some Manga / Anime style to a Mitsubishi Eclipse
Переглядів 118Рік тому
2Dclipse - CARTOON CAR scale Model! | Bringing some Manga / Anime style to a Mitsubishi Eclipse
Metal Casting my EDC Beads from 3D Print to Brass! | Lost Wax Investment | Every Day Carry
Переглядів 2,1 тис.Рік тому
Metal Casting my EDC Beads from 3D Print to Brass! | Lost Wax Investment | Every Day Carry
WIDEBODY Skyline | Cyberpunk / Khyzyl Saleem Style Scale Model Build Off! (Kent Models JDM Kitbash)
Переглядів 8552 роки тому
WIDEBODY Skyline | Cyberpunk / Khyzyl Saleem Style Scale Model Build Off! (Kent Models JDM Kitbash)
Kit Bashing Hank Hill's Truck! | MAD MAX style build-off
Переглядів 1,5 тис.2 роки тому
Kit Bashing Hank Hill's Truck! | MAD MAX style build-off
Corsa E VXR Wheel Bearing Replacement | Rear | #KermitVXR
Переглядів 3,5 тис.2 роки тому
Corsa E VXR Wheel Bearing Replacement | Rear | #KermitVXR
What does the Corsa E VXR Scorpion Exhaust sound like? | Fitting & Audio | #KermitVXR
Переглядів 4,7 тис.2 роки тому
What does the Corsa E VXR Scorpion Exhaust sound like? | Fitting & Audio | #KermitVXR
Custom Boot Badge - 3D Printed - Corsa E VXR | KermitVXR
Переглядів 1,5 тис.3 роки тому
Custom Boot Badge - 3D Printed - Corsa E VXR | KermitVXR
Making IKEA furniture Rustic | Cheap & Easy DIY!
Переглядів 2583 роки тому
Making IKEA furniture Rustic | Cheap & Easy DIY!
VXR Corsa E Exhaust | MID Silencer / Resonator Delete (With before & after sound)
Переглядів 6 тис.3 роки тому
VXR Corsa E Exhaust | MID Silencer / Resonator Delete (With before & after sound)
VXR Corsa 'E' Brake Disk & Pad Replacement | EBC GreenStuff (KermitVXR Daily Driver)
Переглядів 3,4 тис.3 роки тому
VXR Corsa 'E' Brake Disk & Pad Replacement | EBC GreenStuff (KermitVXR Daily Driver)
3D Printed V8! Fitment Engine ---- V8 Swap | Part 4
Переглядів 4173 роки тому
3D Printed V8! Fitment Engine V8 Swap | Part 4
Opel 'Rebel' Rekord (Latela) ENGINE OUT! - V8 Swap | Part 3
Переглядів 2,3 тис.3 роки тому
Opel 'Rebel' Rekord (Latela) ENGINE OUT! - V8 Swap | Part 3
Rebel Rekord V8 Swap - Part 2 - C20NE Cylinder Head Removal
Переглядів 1,1 тис.3 роки тому
Rebel Rekord V8 Swap - Part 2 - C20NE Cylinder Head Removal
Rebel Rekord V8 Swap - Part 1 - C20NE Engine Strip Down
Переглядів 1 тис.3 роки тому
Rebel Rekord V8 Swap - Part 1 - C20NE Engine Strip Down
Don’t need to clamp the hose when your changing brakes
@@joshwilliams8903 I was covering my bases as I wasn't sure if the pistons needed attention, was considering taking callipers off too 🤜
That's some nice fitment! Would you mind sharing which spacers you're using and what tyres? I assume the wheels are stock just colored? Thanks in advance! :) And it looks to be lowered as well, 35mm front/back? I am trying to get a fitment like yours but with 8.5J wheels instead of the stock ones which are 7.5J I believe, so I'm not sure if I will be needing spacers as well or will the increased wheel width be enough.
@@Razorback27495 thanks! Yeah it's lowered 30mm front, possibly 35 / 40mm rear (honestly don't remember!) Standard alloys re painted in racing bronze. No spacers (although could do with some). Tyres are 225 / 40 Toyo Proxies Sport 2. I don't think you'll need spacers if upping the width, unless the offset is different?
@@CoffeeGasoline That is very interesting, I was sure that there were spacers on. Thank you for all of the info I really appreciate it. It's hard to find good content on E VXR's. I wanted to go with Friedrich Motorsport exhaust but you might have convinced me to go with Scorpion non-res. Just gotta check if it is TUV compliant. How is the ride quality with such an aggressive drop if you don't mind me asking? I feel like I can go a bit stiffer than stock, but not too much.
@@Razorback27495 cheers for the compliment! The tyres are wider than standard (think standard is 215?) so fills the arches more 👍
Hiya, did you experience any drone with the standard system when the mid res delete was carried out? If so, was it notably louder than the stock system? Please can you let me know. Thanks ☺️
Left to losen 😂 lol no need to cut 😂😂😂
@@BrandonHamer-pn8vm lefty loosey, righty tighty, cutty cutty!
do you need to do wheels realignment after adjusted the car height ride?
@@benny9588 Yeah I took mine for alignment, it was a little out so worth doing 👍
Should never add anti seize or anything to wheel bolts. The decrease in friction when torquing them down will actually increase the amount of torque being put on to the bolts effectively overtightening them. So if your torquing them to 110nm with anti seize then you could be tightening to 120-130nm actually making it harder to get them off next time and risking snapping
@@JohnFoster-fv7fr makes sense 👍
I bet you had no fun at all 'stress testing' it.
Yes, I want to see you cast a metal thermo-housing! Would be interesting to see how you copy a part in metal.
I didn't see the button light up, but I clicked it anyway. Is that right? 🤔😋 Cheers!
@@allisonfairchild991 thanksya kindly!! Boooo I thought my magic trick would work 🫣😁
Lol karhu beer can😂
@@Santelssi 😁😁😁😁
What’s been done to make it burble and pop?
@@cameronmoore4434 remap, 3" cat back exhaust (non res). Does it when letting off the throttle 😁
I am so confused because I see a lot of Nissan cubes on the website Pinterest ...that have a different front end ..yours looks like it has different headlights from the stock one.. are your headlights and grill stock or did you buy JDM front end and if so where did you buy it from??
This one is a 2006 Autech (Z11); they did a facelift version of the Z11 which had oblong lights rather than round. Then there is the later Z12 model which is much rounder overall 😁 I think the grills changed on model style, like Ryder, Autech etc. Ryder also had a body kit. Then if you want to delve deeper, this one is technically a 'Mk2', as there was an earlier 'Cube' that was much more boxy 😁
Who sells jdm front end for a Nissan cube in the USA?
Not sure sorry 🤘
Exactly the video I was looking for. Thank you your course looks like the d variant.
Hope it helps 🤘the D & E share similar features 😎
Thanks again I don’t suppose you can link the tools and equipment you used
@@bradador1 sure thing, air con gas - www.halfords.com/motoring/engine-oils-and-fluids/air-con/ac-pro-auto-air-conditioning-recharge---gas-r134a-264627.html Trigger - www.halfords.com/motoring/engine-oils-and-fluids/air-con/a%2Fc-pro-air-con-reusable-trigger-and-gauge-537942.html
I just install the valve but no sound of flutter when i had the stock i had i dont know why
Hey there! Did you install it the correct way (open port facing the engine)? And which spring did you use vs how much power you are running? The flutter isn't necessarily a great thing, the standard one fluttered due to being worn out. Mine mostly flutters while everything is warming up now, then tends to stop
@@CoffeeGasoline corsa d opc nurburgring edition 210 factory I use the green it works perfect and much more responsive just no flutter
@@johnakosxdgk875 ah right not sure on the D, I would imagine you won't get much (if any) flutter if stock power, I think the corsa's are mostly designed not to due to being a recirc. You might get a bit more with a cone filter if not already installed?
@CoffeeGasoline I already have makes great noise now with the valve a little more I just lost the flutter noise
thats not exactly what i meant with the sole but if it works, it works! ill send some of the crepe your way! :p
lmao well... if it works, is it really a dumb idea!
@@CoffeeGasoline you are dangerous enough as it is! "polishin, wheel said OOF to that damn coin!" (see Dazed and Confused for quote reference, slightly paraphrased!)
@@TheGruffest82 😂😂😂
Hey what happened to '7'?
Nevermind, found it 19:45
🤘 I was a bit chop-happy with the editing 😅
I had to look it up... It is a good message to carry. The phrase “Memento Mori” is a Latin term that translates to “remember that you must die.” It serves as a reminder of the inevitability of death and is often symbolised by objects such as a skull. The concept encourages reflection on the transient nature of life and the importance of living a virtuous and meaningful existence.
Yeah I see it as a positive reminder to live each day 😁😁
This is cool dude, might have to steal it some time :D
Cheers mate, would be awesome to see what you do with it!
My God, that scraping sound through headphones 🤢 Beautiful work though as always 😁
😂🫣 yeah, had to leave it in, let everyone suffer 😂😂😂 cheers mah doode! 🤜
Insulate* teach! im gonna sent you a few thick leather soles. you can use them clean off your buffing pad and also, rough sanding on the sole face will bring back its brush cleaning capabilities!!
Absolute legend! Cheers mate, learn something new everyday! Can't wait to try it 😁😁😁😁
Did you notice any difference at all?
It's definitely more responsive. Got some nice flutter when cold then tightens up when warm 👌
More cube content please!!! There’s not enough people making good quality edited content from the uk
Appreciate it! I've got some footage kicking round just nothing concrete yet 😁
@@CoffeeGasoline brilliant! I’ll subscribe and look forward to it!
@@Can_I_Kick_It legend 🤜🤜
Also, do you still have the original hubcaps still? I’d really like a set so I’d be keen to buy them off you
I do! They are not in very good condition mind, very curbed & scratched
@@CoffeeGasoline Oh lame, they're so hard to come by. I think they're the Conran edition ones right? Might speak to Dan Bell.
@@EightNineOne not sure dude, yeah they were heavily done when I got it unfortunately 😞 Dan Bell is the guy to ask!!
I have the same rusted bit on mine, is it an issue you think?
Nah it should be fine, fairly common due to the weather caps - I've left mine off
@@CoffeeGasoline Good to know!
Well this was just a joy to watch! So cool to see how this fever dream of an idea actually became a reality, a million thanks to both yourself and Richard for making it happen 😁🤜🏻🤛🏽
Was a pleasure to do! Thanks again gor the awesome fever dream 😂
Such a pleasant viewing experience. Very chill and engaging at the same time.
Cheers dude! 😎
Would you recommend doing this to a stock corsa e vxr
Certainly wouldn't hurt, the stock one is not brilliant. Just stick with the green spring if you do it, and don't cheap out on the valve - buy from reputable place not fleabay 👌
Fluttery Kermit!
Gotta have some flutter flutter!
Please share your wheel and tires specifications. It’s looking good.
Thanks! 🙌 The Rims are 15 x 8j Autostar Sutorro's with -25et. Tyres are Toyo Proxies, R15 - 185 - 55. Hope that helps!
Many thanks for the vid. Just converted my new cube, and this was a huge help.
Excellent, glad it helped!!
That is Very Cool SIR I like It
Thanks!
'Promo SM' 😍
Autostar Sutorro alloys ❤
They are lush like! 😁♥️
Awesome Cube 👍 #DIARYCUBE
Thanks! Yours is cool too!
Phenomenal content as always! I love the ASMR focus on the audio, really grounds the process and helps make it more real.
Thanks dude! Appreciate it, at somewhat of a crossroads with the whole youtube thing so trying to make it a little more 'natural' so it feels more achievable... especially for the limited exposure 😂
Have just had the esc and abs light come on today the throttle was all over the place pressing it gently the car will speed up very quickly and heavy engine braking at low rpm. Did you experience the same issue?
Yup, drove like a pig. The throttle was all over on mine too. Try doing an emergency stop from a decent speed first before changing any abs sensors 🤜
That's rad dude!
Cheers dude!!
Absolutely love it mate! So cool that the whole thing can be peeled off too
Cheers mate! Yeah it's defo a perk... get bored, peel off & start again!
Nice!!
Thanks!
Took a look at your etsy page, I think a ring would look really cool with your logo! :)
Cheers! Strangely enough I've been messing with some jewelry behind the scenes for a long while, maybe I should release some 😉
Top man. Great vid, easy to follow.
Hope it helps dude! 🤜
It's looking good! And supernaturally clean underneath, that's not normal.
Cheers dude! It really is! I'm gunna have to try keep it that way 😂
I actually laughed out loud at "ugger dugger's". I've never heard that!
Gotta use the ugger duggers!
Great video. Look forward to seeing it lowered! Turbo on a cube, well that’s gonna be interesting!
Cheers dude! Lowering vid should be up later today 😎
top man! I am searching for the guide video for ages. as I am going to do the same for my Z12. Thank you very your help!
do you need to disconnect the battery when you do it?
No worries, hope it helps! Should not need to disconnect the battery, unsure if the Z12 has any extra steps, might be worth asking in the Nissan Cube Owners facebook group (where I recently found out how to do all this!) Good luck 👍👌
There's a light in your eyes when you talk about this project that's great to see, I think you are going to have fun!
Cheers dude 😎 yeah it's certainly captured my mojo this one!
Why is this so amazing 🥲
🤣😂🤣
I like seeing the car stuff and think it would be amazing to journey with you to the conclusion. Totally get it that it's a hassle to add filming and editing to everything else, so understand if you stopped. I would rather see some phone footage that is maybe easier for you than no footage at all :-)
Much appreciated dude! Yeah I might just start editing these ones on my phone so it's less of a hassle, see how it goes!
Finally 😎👍👌💪
More Latela's old car please 😅
@@jouniporolampi5447 will keep filming 😁😁