Відео

No, typically at the beginning of the day for good measure to make sure the ratios will be the same. This is also mainly for after removing the rear manifold or head caps for maintenance. Repriming the pump can be a main when it's bone dry.

We typically don't if you have calcium deposits on the check valves, it's probably a good time to change them out.

Thanks homie, that means a lot. I try to keep it straight to the point without rambling!

I’m sure you get the idea

We can definitely help you out shoot me a text at 904-999-8087

Trident

Hey man, the barb size is going to be dependent on whatever output hose you are using to the hose reel. As far as the threads go, the piece that goes into that outlet manifold has the two green O-rings on it and then a female threaded portion. Typically those threads are quarter inch or 3/8 inch. Therefore, you would need to get an adapter that goes from 3/8 to half inch and then run your regular hose from there

I lose pressure when I turn the chlorine on

Then there’s an issue with your plumbing on the soap line. Assuming everything else was followed in the video And the pump runs perfectly on water usage.

@@properexterior that's what we were thinking. Thanks for replying!

@@midlifemike4916 Text me some pictures 904-999-8087 I’ll help you out

If you live near Jacksonville we can get you one local. Otherwise I would send you to north Georgia airless

@@properexterior can it be shipped? I live in San Diego

@@josephdufresne2942 North Georgia airless would be able to help you out with that if they are able to ship to California I prefer to only do local transactions when it comes to equipment like that

@@properexterior understood! Thanks! Curious, is there anything I would mention to them regarding a set up like yours? Or does it come standard?

Customer provided 4 manual reels and we matched it to make everything look good. On my channel I have an unboxing between the two brands. They’re identical, pretty much same price and perform the same. It all comes down to what your stores stock and what you can get your hands on. I have 6 reels on my truck and 4 of them are titan

There will be a DETAILED walk around video in the near future! We recorded one and the lighting / environment was not in our favor -_-....

Thank you for your service #merica

So we built this one custom for a customer! But we are able to build and sell this trailer. Identical to this one would run around $48-52k depending on the amount of electric reels. 4 manual reels / 4 electric would be at $48. 8 Electric would be at $52. We can also add / remove anything you'd like!

Can we tie it in with the drone?

I want a pressure wash to attach a drone Do you have it ?

@@havalyounis149 yea you can tie It in with the drone for sure!

@@havalyounis149 we can definitely get you one setup!

If you’re up near jax, I can invite you to our local group ;)

I got rid of it, it’s a major flow restriction and it’s not necessary for our industry. You can remove it! Then just get a 3/8” male pipe thread x 3/4 or 1/2” barb for your output hose to the reel! North Georgia airless also has these adapters in stock!

@@properexterior thank you brother 🙏🏻🙏🏻

We are running 20 gallons per minute. On average with three different machines. Small tanks won’t keep up with what we are doing.

525

Thank you so much, this trailer is used on a specific job that requires stretching hoses a minimum of 300ft up and over a roof!

This customer has one contract that is triple the amount of the trailer. It’s a yearly contract!

@@properexterior thats awesome

Very minimal, but it definitely works. This build was a bigger headache than any other one I’ve done. Due to minimal room to move around and get things installed.

@properexterior I bet it was, but now a lot of people who own vans can have a good idea on how to lay it out with the amount of space 👍.

@@michaelc7283 that’s the point of these videos, is to try and give people ideas of what can and can’t work! Stay tuned for one of the more recent builds, aluminum flatbed and 2 8gpms 😮‍💨

Yes, pavers do need regular maintenance! They're highly pushed as a "luxury" but require upkeep. This is a worst case scenario shown in the video! Not all paver projects are like this.

Thank you

North Georgia Airless

Yes, you would just have to adjust manually. That’s not an issue at all

Trident tidal wave gel!!! You may be experiencing a solvent based sealer, which is going to be brutal to remove

It’s 1/2” hose. Bucket test and a timer doesn’t lie.

So they’re basically just “broom” or “pole” clamps from Home Depot. Lowes sells them too I think they’re about $6 for two of them!

Home Depot sku: 568117 Correction, about $3.90 for two

Thank you!@@properexterior

Proper exterior cleaning on Facebook 9043336000 Properwashingllc@gmail.com Thanks!

Depends on multiple variables in order to achieve an accurate price. In our region we see from $1.50 to $1.85 for most “new install” not previously sealed pavers. Any job that has been previously sealed requires in person testing, examination and other necessary information before deciding if it’s something we want to take on and then at that point we can provide pricing. Typically those start at the higher $2.75 per square foot and go up from there. In some situations the pavers will have to be replaced. *highly uncommon*

Hydroseal 1/2” threaded ball valve with a 1/2” Mosmatic swivel. Amazon sells the ball valve. Kleen rite sells the swivel Let me know if you have any other questions!

It reduces flow quite a bit. I HIGHLY recommend removing it. It’s the same exact process, all you do is take the black plastic piece off and keep the valve open when priming.

Can you show a quick video short of how you have it set up? Thanks

What fitting replacements did you use on the pump going to the hose reel? I would like to do the same with removing that valve. Thanks

@@christopherdodson323 it’s a 3/8” mpt x 1/2” fpt fitting. Then a 1/2” mpt x 3/4” male barb with three-quarter inch hose

@@properexterior and the top is just a 3/4 check valve to 3/4m x 3/4 barb?