Відео

Thank you for the video, and the screenshots of the hose and the correct orifices. I did the same thing, ordered orifices that are too small. Have the right ones coming in a couple days! Thanks again!

Do you need a regulator for natural gas? I have a propane Napoleon that im trying to convert. The instructions for the gas model says it comes with a 1kpa regulator but can I use it with just changing the orifices you think?

Excellent video, thanks! Great tip on the orifice size. I’ll remove mine and check their size before ordering.

I was thinking of trying out heavy duty plastic pallets with plywood on top

16 years of ownership and finally the secondary line is dripping water, with this video I will be able to make the repair, thanks again for a perfect video

Does your spray foam help with your electric bill in the summer?

Our condensate line clogged for the 3rd time, causing the pan to overflow onto the attic floor and insulation, which caused the ceiling to collapse in the master bedroom an area 24 x 40...for the third time! Your video was by far the best one I viewed, looking for a way to unclog the line myself at midnight when the ceiling fell down, but I couldn't dislodge the blockage as I didn't have what was needed to do so. Thank you for such a good video!

I just changed mine out. Thank you for the hints and showing how to change it. I tested my religion with this replacement lol. Stupid design and placement but got it working. Also for those trying to figure out if this is your solution. My problem was that my AC would only work on high. After swapping it out (got it on amazon) it worked instantly on all the settings. Cheers

Hi Dan, I came across your video hoping to find an answer to my problem. Your video was helpful for replacing the orfice, which was great. I was able to do the conversion myself with ease, however I notice a problem right away with the flame. It is small flame that cannot be controlled with the NG gas manifold. No matter if the valve is wide open or set to a minimum flow, the flame is still the same size. I'm wondering if you or anyone else has experienced this? I am considering buying the OEM propane gas manifold assembly so I can actually control the heat on each burner. I'd like to know other people had to by the propane gas manifold for this conversion?

I find knocking the stake in from vertical best......on the angle.....only has a little dirt a head over it to stop it moving.....also the dirt is being pushed up.....very little resistance. I also use thick angle iron.....its flats again ad resistance. Great video dan.

Hi Dan......your dog loves working with you....a joy to watch.

Hi the best tyre fitting video I have ever watched.......your good man....thank you so much for sharing your knowledge man. I am in the UK.....been changing my own car and 4x4 tyres since I was 17 with just tyre irons....now 71....just for myself. My pal brought me 6 old wheels and asked me to help him dismount them.....they are off a big american 4x4 16inch.....20 years old....tyres look great no cracks. Bead braking was a sinch.....getting the first side off every tyre was easy but getting the back side of every one was a PITA. We gave up on the last 2 for another day.....but seeing your ways has given me new hope. Just never had a prob before....thinking its just that the rubber is old....we used plenty of lube. Nick from the UK.

Oh my gosh that was so easy! I was thinking the battery was in the little black box behind the push button and I could not see how to get in there. UA-cam is perfect for things like this. Thanks my igniter is working again.

What size tank is that?

Thankyou for this video! I liked and subscribed. Very helpful.. something that might be helpful to your viewers.. Mention the size of the tools you are using I.e< 10 mm socket, t25 torx, etc... great job and thanks again

my drain line runs behind my stack washer dryer. I have been told that freezing can occur if draining outside. Any info on that?

Incredible video.

I’m having this problem right now, replaced the acuator now it’s throwing a P003A code. Do you think I need to do a relearn? The handle on the acuator doesn’t always work when I start it

Thank you. You just saved me a lot of money. I’m going to order one and replace it.

I will be replacing mine tomorrow! Thank you

Very helpful and well explained. Loved the guest appearance from your dog too

I live in Southern Arizona, AC died a month ago and for expediency I decided to limp through the summer with a swamp cooler, similar in size (Hessaire) to the this. My experience is that they're a lot better than a fan, much less than air conditioning and if you don't leave doors and windows open a little the house will get very humid fast. Effective area is a 15 foot radius in front of the cooler and unless you rig the hose you'll go through about a gallon of water an hour more if you use a higher setting. Definitely glad I purchased the product, fans alone definitely wouldn't have been enough.

Thank you!

❤❤❤thanks pool guy

Awesome video… I picked up that exact grill next to a dumpster behind my Ace Hardware this morning. Just need to convert it to LP and buy some new flavorizer bars and I’ll be good to go.

Great instructional video. Thank you

thx, the best and cute dog

I had a bad accident that left my arm kinda screwed missing a big chunk like a shark bite plus bearly any mobility in my wrist i can put my weight on it no prob but cant really bend it goin back to work tomorrow and im a bit nervous i used to be so good and efficient at this job plus i love it i really hope i can still do it

Thank you so much. amazing video .

Awesome video! Very informative and easy to follow. Interestingly the first belt you got was a square-tooth belt for older VG engines. The VG33 in the Xterra has updated round-tooth cam gears that wear on the belt better. That Amazon kit should definitely not be advertised for Xterras and frontiers

Get you a JV1--JONES VALVE CONDENSATE DRAIN BLOW OUT VALVE. Way too much work here the hard way .

Enjoyed video, I have had to do this a couple of times on my liberty reel, 2 times in the pst 10 years. Still working.

Dude this is the best freaking video on this. Thank you for actually explaining it! You saved my ass!

Really good video, personally I don’t trust those “Oil Life” percentages. Like you, I don’t change the oil and oil filter based off of what the manual/manufacturer says. It’s all usage dependent, but also depends on what oil you use, how many miles you have on that engine, stuff like that. My personal vehicles, I stick with 3,000 miles, maybe 5,000 in a pinch. But I check the oil daily on both vehicles, like it should be.

This was so helpful thank you so much!

The best and most informative on this subject 🎉

How is the draining with the pavers lined up to the retaining wall? I'm about to start a project but am worried about drainage. Thank you for the video and great work!

Thank you! Your system looks identical to mine and helped me understand how to fix the clog

GREAT VIDEO. THANKS!

Thank you. I almost gave up, but once you said, "8 times within 10 seconds"...THAT DID THE TRICK! Thank you again.

Would this work on a screened in porch?

my truck has 37 thousand miles 2017 showing reduced power it slows down with in maybe not even a block any body that can help me ........

shock it socket. trust me it's the only way to remove these things.

I use 2 extensions and a u joint for that plug on the back

Thank you so much for making this video. I’m dealing with this same issue. Thanks again for the great information. I just subscribed!

I super appreciate this video man. I sweat my aaay of before trying to swap just lt's and you make it look easy. My favorite moment from the video so far is the rear stomp while pulling front bead. I'm at 7:02 and couldn't stop myself from praising you💯 More up come I'm sure

My '17 colorado drives me NUTS with this. When it drops below 100° out, I'm gonna chase electrical goblins and figure it out.

this was a really great video, i've had this happen twice now and just caught it starting up again (luckily my unit is in basement though). Looking to upgrade that based on a couple of your suggestions here as my evap drain/p-trap is almost impossible to service without a bit of "drama" if you know what i mean thanks again!

Awesome trick! I bought a nice used box and couldn't figure out how to make the rippers lock. My spring is missing! Now I know why and how to fix easily. Thanks man!

Great tutorial!