Відео

Hello. Our products are sold worldwide. This is the link to buy the LCD dashboard, if you have any questions you can ask online customer service. www.pempcar.com/products/w205-x253-digital-cluster

1. check if the car has fiber optic cables and make sure to transfer them if you have them. 2.Connect the USBAUX box correctly and select the USBAUX device in the OEM interface, then enter the Linux interface to play the sound. 3.This is the link for 5.0 machines using OEM Bluetooth, no need to go through AUX again to get sound: ua-cam.com/video/ID7o5qiGOvI/v-deo.html

Usually the post-2019 ones are modern dual-screen styles. The original cars are pretty good without changes. If you need to upgrade the LCD dashboard for your car, you can contact our after-sales service or consult our online customer service on our official website, take a picture of your OEM dash and send it to them, they will give you a more accurate answer. Because I can't see the picture of your car, I can't give you an accurate answer. Here is the link to the official website: www.pempcar.com/

Hello! 1. add a rearview camera issue. Firstly make sure your camera resolution is not more than 720P, secondly inside the settings - camera type, choose aftermarket camera. 2.Sound problem: Can you control the volume by turning it down inside the settings? Normally, it is to adjust the phone volume to the maximum in advance, and then use the interconnect function, because after connecting, the phone volume can not be adjusted again. Only then can you control the volume through the car knob.

@ I can adjust the volume in the settings but I can’t adjust the volume with my car knob or steering wheel buttons.

You will then need to check that the AUX position is set correctly and see if the car is fitted with fiber optics that require modification.

@@YEEHUNGElectronics it is a 2017 BMW 330i. F30.

If it's an NBT system, this screen is the one for your car. The EVO system will not fit.

Hello! There is no option to use the dashboard in the Linux interface. If you originally saw this data in the OEM screen, then go to the Car info menu and see it as well. But if you are seeing this data on the OEM dashboard, it is definitely not visible on the screen.

Hello! We judge whether a car can use the screen by the following factors: 1. CIC/NBT OEM system with 6PIN LVDS. 2.F20 F21 F22 F30 F31 F32 F33 F34 F35 chassis number of the car. 3.OEM UI picture. As for the code you mentioned can't really be considered as a criterion for judgment.

Hello! This is our own product, the product is expected to be available on Amazon in mid-December, you can search YEEHUNG to check it out then. Thank you!

It's 10.25 inches.

You can use the steering wheel to answer the phone or you can use the touch to answer the phone. That's the point I was trying to make.

There's no need to combine them as each part has its own use.

¡Hola! Puedes ponerte en contacto con nuestro servicio postventa para que te ayuden a solucionar el problema. service@yeehung.cn

You're too meticulous. Try to keep the original sound for future videos.😊

There is no LCD dashboard adapted to this car yet.

Thanks for the support!

i just installed mine today. My backup camera is not working. Any idea why?

This car was used for testing and the top cover was previously broken. Be careful when removing it. Otherwise it will break like ours. You have observed it very carefully.

Friend. I know you purchased mine not our dashboard. Because we don't sell it yet. I can answer for you. Each manufacturer has a different decoder for their dashboards, so if you need the ability to cast the screen, check with the appropriate manufacturer to see if they have it. You most likely will not be able to use our decoder for screen casting. Because it's paired with our dashboard is used. Hope this helps.

Ok friend. The person I purchased the dashboard sent me this video to show how to install this why I thought it was your dashboard. I installed the MS9120 app and also fitted the dashboard following these instructions. The only part I am stuck is I do not have the tickbox option for Screen cast

@@DQJLONDON Friend, it's okay. Screen casting function requires a DISM box, this is the manufacturer to equip you with, if they do not support, that is no longer available, you need to connect a box, you see our video inside the connection to this box. One more thing, only Android screens support this feature.

Yes friend I have new 12.3" android screen install with the new digital dashboard. I have looked at this video and I have everything the same. All the cables and also the HDMI to USB adapter etc. Everything I have is the same. Even the MS9120 app is the same. The only thing that is not the same is the Screen cast tickbox 😥

@@DQJLONDON After connecting the box, you have to press the steering wheel button to the navigation position shown. Inside the dashboard function, check the navigation function and press once to use the Projection function. That's why you don't see the cast screen function. Hope this helps.

Works with the new 685 chip Android screen. Here's the link: www.pempcar.com/products/w205-x253-digital-cluster You can check it out first.

Hello! You can watch the after video. We use a harness adapter to establish a connection between the motherboard and the LCD display.

what time ? because it seems like you juste lay of the motherboard of the original dashboard inside the new cluster with no connection betwin them

@@abdelkaderboussaid2297 7:12 This is the time to start removing the stock dash cable jacks and replacing them with the LCD cable jacks to start the docking process. The principle of their transmission is via cable adapter. After swapping the sockets, the original cable goes directly to the socket on the new LCD screen's socket, and then a portion of the adapter goes to the socket on the original motherboard. Is this explanation understandable.

@@YEEHUNGElectronics yes thank you ! and about the middle screen on the original dashboard, no need ton remove it or the piece under it ? you can just lay the mother board on the new cluster ? not affecting features or fonctions ?

@@abdelkaderboussaid2297 You're welcome! Q:and about the middle screen on the original dashboard, no need ton remove it or the piece under it ? A:Yeah, no need. Just need to remove the left and right mechanical gauge pointers. Q:you can just lay the mother board on the new cluster ? A:Yes, just put it on top. Q:not affecting features or fonctions ? A:By connecting an adapter cable, the new LCD dashboard's has the functionality of the original mechanical gauges.

This is up to your preference. You can put the USB cable inside the armrest box on the right side of your vehicle. The cable is long enough.

Hello! You can send your question back to our after-sales service. Please rest assured that he will be able to solve your problem. service@yeehung.cn

1. If you have the original camera, set it up. Steps - Reversing Settings - Camera Type - Select Original Camera. 2.There is no protocol option for Linux screen, the protocol is directly adapted with NTG5.0. Hope it can help you!

@@YEEHUNGElectronics I already did and in addition I contacted Amazon (that's where I bought) they told me unfortunately I have a malfunction and that it often happens with Linux. I'm going to send it back and get an Android. Thank you anyway

You're welcome.

As long as the original car worked before, it will also work after installing the Android screen.

Look this: [FEATURED FUNCTIONS] Blue Anti-glared 1920x720 HD screen, 12.3" oversized display, multi-point capacitive touch function. It adopts 11 nm Qualcomm Snapdragon 662 8-core High-speed processor, 8G operation memory and 128G memory, with faster reaction speed. Bluetooth 5.0 supports playing music while navigating. After connecting to the network, it supports online voice control function. With a 1080P AHD reverse camera, you can get the HD reversing video. [MORE FUNCTIONS] Retain all functions of the original car. Support wired and wireless Carplay, Android Auto and wireless Mirror Link function. Support factory and aftermarket and 360 Camera, keep your original car radio, amplifier function, factory knobs control, original rear view Camera and reverse trajectory and so on. Support Bluetooth music and call, it's built in Wifi, USB ports. Support split screen, multitasking run 2 apps at the same time. Support Google Play and multiple languages.

Yes, you can, you just need to prepare a picture with 1920x720 resolution, change the format to png. you can only put one picture at a time in the USB flash drive, then plug it into the USB and it will switch automatically.

You send us the dynamic picture of the desired effect to our after-sales service, make the firmware package, and send it to you for replacement. Both static and dynamic are possible. Dynamic logo replacement method: logo compressed package into the U disk, start the car, directly into the device USB, will be prompted to import successfully, restart again can be seen. Static logo replacement method: prepare the picture, we will make the corresponding format, create a new folder, and named OEM, put the picture into the last inserted into the USB, in the factory settings inside the click BOOT LOGO, click on the import, and then go to the PAGE2 you can see the picture you imported. After selecting it, reboot again to see it. I hope it will help you! service@yeehung.cn

The one in the video is 10.25 inches, the one we currently sell is 12.3 inches, check it out if you're interested!

This is a hexagonal screwdriver, T20.