Відео

Not entirely sure, but can’t see why not as it’s just power and signal. Recommend you double check the connections and also check the setting in the head unit as you need to select the camera in order for it to display. Hope that helps mate

You might need a small set of nose pliers as it’s a bit fiddly if I recall

Glad I could help 👍

Worth a try as it’s normally the filter that blocks rather than the nozzles

Glad it was helpful! 👍

Thanks for sharing…glad it worked 👍

Glad it helped

Thank you mate. Glad it helped and working better than before 👍

Thank you mate and good luck with your project….well worth it. Didn’t need any anchors as used drywall screws at every section so spread the load comfortably. It’s a personal choice but mine are still standing 2 years on. Hope that helps. Remember (and can’t stress this enough) to test every lamp before fitting.

Also don’t forget the string line - makes for a nice straight job 👍

@@sanjdesigns awesome, thank you for the feedback. I will definitely be sure to remember to test every tube before fitting.

@@sanjdesigns Will do 👍

Nice one…glad it helped 👍

@@Samuelmeigh Thanks for the message. Seats had to come out to access the screws. Didn’t know at the time but had no choice otherwise bulkhead wouldn’t be able to be removed. Only 6 bolts so not a major issue. Hope that helps mate

To be honest I didn’t as I only kept it for a couple of days before returning. Doesn’t sound very safe at all!

Thank you mate. Glad it helps

You can these off Amazon or eBay amzn.eu/d/5ReRFl3 cheaper than a visit to the garage

Don’t disagree, but did mine 3 years ago and still working no problem. You could always suck out the washer fluid if you’re worried.

@@sanjdesigns oh well then it is worth it

Thanks for the feedback. Returned mine soon after the published the video and glad I did. Didn’t want to link it to the NVR as wanted to show what it was like to live with without an NVR and the results are there for all to see

I've had my Ring Elite for more than 5 years.

You're welcome!

Understand and agree. That said, one of the viewers followed the same principle to clear the filter but used a rubber pipe and blew down the line and this seemed to work.

Hi there, yes done some more videos (sound deadening, new cabinets) but struggling to find the time to edit and publish as the moment. Hope to soon though. Thanks for watching 👍

Nice one and glad you enjoyed the videos. Good luck with the install and no doubt yours will look amazing too 👍

Totally agree and did mention this in the video that the original fuse goes at the top. Easy to get wrong so important to take your time 👍

@@sanjdesigns You misunderstood my comment. I was not referring to which slot in the fuse tap to place the new and original fuses. I was referring to the orientation that the whole fuse tap is inserted into the fuse box socket. It has to be the correct way round. Insert the fuse tap the wrong way round and the camera will get its power through BOTH fuses i.e. the camera wiring would be significantly less protected. The other consequence (not safety related) is that if the original fuse were to blow, the camera would also stop working. If you don't have a volt meter to identify the hot (12V) side of socket in the fuse box, then insert the fuse tap with the original fuse removed - if the camera still works then fuse tap is oriented the correct way.

You’re welcome mate and thank you for the message. They are screwed directly to the plasterboard (sheet rock) and very light considering how bright they are. You can see I’ve installed it by myself and the tower platform makes it easier and safer. Hope the garage business goes well 👍

Thank you and agree that the Ring hike in their subscription is disgraceful. Am aware of Eufy but never installed so cannot comment. If they use an unencrypted SD card similar to the Lorex then I wouldn’t want to take the risk for the sake of $50 a year. This was an honest review and given the choice between Ring and Lorex would still choose Ring - despite the extra subscription cost. Hope that helps.

@@sanjdesigns Hi, I’m still confused. How are they going to steal data from your SD card? What are they doing with it? And who cares? Just curious.

So as you could see in my video, it’s really easy to remove/steal the device and remove the SD Card. The SD card can then be placed into any laptop/PC without a password and all the images, videos and timelines can viewed. This to me is a massive flaw and I wouldn’t be comfortable with that. Whilst the Ring is expensive, it’s cloud based so if your bell gets stolen or removed no one can see the images. Just my thoughts.

Some people face stalking and domestic abuse so these are the people that are most at risk.

@@sanjdesigns Hi, I have since upgraded to the Eufy E340 dual camera doorbell, one camera for people and one for packages and it works really well. Definitely the best video coverage I have seen yet in a doorbell. I’ve previously used Ring, Nest, Lorex and Eufy. The Eufy does have a build in SD card but has the options for an in house base station or online storage. Personally I’m just not concerned about someone getting my doorbell videos. I think the best deal in video doorbells is the Eufy Battery 2E (2K HD), It’s $75 from Amazon (cheaper on eBay) and includes a base station (chime and 16 GB of video storage). No built in SD. I’ve used and it works well.

I have the Lorex CCTV Cameras and they're pretty good and reliable so no problem recommending those. The doorbell is however, as you said, lame. It all depends on how much work you need to do to install it. If it's just connecting to existing wires then go for it. If you need to install new wiring and transformer then I wouldn't bother. Concept of the Lorex doorbell is good, but the execution and reliability is really poor. I know Ring has increased its prices which is disgraceful, but it's still better in my honest opinion. Hope that helps mate

@@sanjdesigns we have the pan and tilt camera and no mater how I set it I get notifications every time a car drives by. I turned off the notifications because it was so annoying.

Yeah, know exactly what you mean. No matter how and where you set the 'zone' it goes off too frequently so it makes sense to turn notifications off - especially where there is a lot of traffic. That aside, the cameras work well and the resolution is better than some of the competitors. Just my thoughts

Hi there, and thanks for your kind comments. Reference cleaning the sprayer each time, I personally wouldn't leave it for more than 3-4 hours as the paint can dry in the pipework and sprayer which can cause problems. Make sure you drop the pressure before leaving it in the bucket of water. It is a pain to have to keep cleaning the sprayer, but it will save a lot of time and money in the long run. Hope that helps.

Not sure what you mean as it’s a brand new pop top so no rust on the zips, screen or roof? May just be the camera

Thank you mate. They are called 'T tap wire connectors' and are really good when doing stuff like that. You can find them on Amazon - just type in T tap wire connectors. Hope that helps

Thank you Nick & nice to hear from you. Hope you’re doing well too 👍

Thanks for the tip. The van is usually in the garage and used infrequently so I’m always worried about draining the battery hence the reason for connecting to the switched live rather than constant. Will look at your tip when I fit my next dashcam 👍

Excellent and thanks for the feedback. Appreciate not every has a compressor but my concept and your idea worked which is great to hear 👍

Are they the large or small fuses? You might need to buy the right T connector from Amazon

Thanks for your comment. £6K including installation is about right. I had the flooring supplied by the same company as it was CNC cut and I fitted 3mm Karndean and looks really good. One thing I learnt is because the seat is wider that some of the standard kitchen units won’t fit so need to be custom made even if you don’t want to use as a bed. Hope that helps mate

Thanks for your nice comment. Glad it helped mate 👍

Great…glad to hear it. Nice when you can fix things yourself 👍

No worries…always glad to help and nice you fixed it yourself for free!

Yes mate. 3 pin plug was just to test each tube. Once completed was all wired into a standard lighting circuit with switch and breaker

Great stuff. Hope it goes well. Remember to test each tube…will save you a lot of hassle if one tube is faulty. Enjoy the lights 👍

Don't disagree about the image quality on the pioneer mate. It could be better, but to be honest it's fairly old tech, and I'm happy with it as it's better than no camera at all!

@@sanjdesigns sure, much better than nothing and the wiring is more/less universal when new unit goes in

*Hoping to locate one for our 2003 VW Vista motorhome (Eurovan chassis).One fella has on eBay, though he claims it's a super tight fit.

Thank you mate...really appreciate your kind words

@@RV-there-Yet I found mine on eBay so hopefully there will be other suppliers

Thanks for getting in touch. Purchased from a company called Sino Star via Ali Express. Really helpful and saved some cash going directly m.aliexpress.com/item/1005001304663321.html .They'll spec what you need and deliver worldwide.

To be honest I don’t know if they are more expensive to run as I’ve never checked. They are LED within the tube itself so would expect them to be the same cost as regular LED and cheaper than say halogen or fluorescent but also a lot cooler to look at. Hope that helps mate