Відео

Where can I purchase this 31T sprocket??

Wheel speed is based off the reading on wheel speed from the wheels if you changed tire size that will affect your speed reading only thing that will change is rpm will be lower at higher speeds

I live in the same town. You live in and I want the same bike. As well

31 or 32 teeth sprocket?

No Link ???

Is there anything like that for grinding metal for auto rust repair ?

😀

Good job on changing the pulley ( not a sprocket).

How do you fix the speedometer after you change the sprocket so it will read accurately again?

Can you change the pad holder from 3" to a smaller diameter?

Why not hold the break put in gear

Higher r p ms One shifting would help should be able to get seventeen fourth year

Thanks for the vid! What do you dilute your ipa to? To make it safe on the paint.

I just ordered some of this to try on my new 2024 ND3 Miata, hoping it does even close to what it claims! The price has gone up a decent amount the last couple years, but it’s still a good deal!

I did the same thing to my 1200 and it's perfect now

Good mod. How do you fix the speedometer to match?

I put a Hammer 1250 kit on my '06 XL1200R as the pistons weigh about midway between the 883 and 1200 pistons - right about the weight the crankshaft is balanced for. I alsofitted a 32 tooth tranny pulley and the cruises at95 @4000 rpm... it'll do 100mph in third as I have ported the heads,changed cams along with other things!

You still can see these s marks just made plastic to look darker like is wet probably go back to it's original faded state when it dries out

Nice job

Bro, covering background with that polythene was not required since it is making look poorer

yall parts changers u can't work on shit

How does the sprocket come off left handed threads .I got a grinding when I go to first only first gear have u had this problem

How does the sprocket come off left handed threads .I got a grinding when I go to first only first gear have u had this problem

Try Kamoi washi tape Kabuki-S from japan It’s what i use I get a couple boxes at a time Less than $20 to ship US tape is terrible Or it’s insanely expensive if you want a quality tape It’s a joke

150+ miles on that Acura, wow but it's still nice Tho! Nice mini van! Ohhh wowwww.. I absolutely love the bike 😮

I bought a '97 883 a couple years ago. It was a neglected and abused bike; slowly bringing it back to life. Just bought a 31T sprocket, ordering a 2-into-1 exhaust, and dropping in either a Mikuni or Lectron carb over the winter. Can't wait until spring to get it back out!

it sounds like a sewing machine

Where was the struggle of getting the main nut off

I put a 30 tooth on my 05 883. Wouldn't recommend it if you was always in the city, hitting every stop light, but on the highway, it's great.

Fake. The haze is on the inside not on the outside.

Get some Rupes course blue and yellow fine foam pads and you’ll love them.

Shift to 2 at 20....ok, shift to 3 at 40.....ok, shift to 4 at <55, huh, shift to 5 at 60.......and you feel you need another gear If you take 4th to cruising speed then shift to 5th you won't feel like you need another gear Based on my having had 2-883 both carb, you can do 95, 75 shouldn't be anything I got 60 mpg on both, cruising around 60mph and under, enjoying riding the curves......however as you go above 60mph, mpg goes down I really don't think you'll see much mpg improvement, and acceleration will go down

Do you need to change the belt?

Great video, man! I've had *3* 883's and a 1200. I still have one of each, and I've been trying to decide which one to sell. I always wished for a sixth gear for my 883's. The 1200 is geared taller and does better on the highway. So I think I'll do this mod to my 883 and sell the 1200. I'm 190# and I have *never* had to use full throttle on any of my 883's. They keep up with traffic just fine, and will cruise all day at 80 mph - *if* you hands can take the buzzing ;-) It's funny to think that the Sportster used to be considered a full-size motorcycle. Now, it seems kind of dinky. I think H-D geared the 883 down to account for two lard-ass Americans riding on it. But honestly, the Sportster is not really a "two adult" motorcycle. Like you admit, it's kind of a small motorcycle by comparison to other modern bikes. Maybe it was meant for two skinny college kids from the 1950's, but not two average American Walmart shoppers. Anyway, thanks for the video!

hello, I'm going to do this on my 883 here in Brazil, I already bought it on ebay. Mine has a lot of vibration, then I'll send my opinion. I saw that your gear has 28 teeth, which one is your sportster?

Drills arent the best motors to run continuously. Only buy a drill buffing kit for small jobs and don't use them on a cherished car as a proper dual action polisher isnt massively expensive and will give much better results.

Good content thank you

6/1/2023 I have a '93 Sportster 883 , is this the same front sprocket Thank you

Was just the front sprocket enough or you want more?

vous devriez être professeur, très bon video bien expliqué

With the pulley being splined to the axle there was really no need for harley to engineer left hand thread. Also, applying a heavy torque on this nut is pointless. It simply needs to line up with the keeper snugly. With the keeper on that nut is not going anywhere.

I did my 2009 883 Custom. 60 mph is now 65 mph. I like it. Here is what HD says about pulley upgrades "At 70 MPH, each tooth is worth approximately 3 MPH. Instead of 70 you'll be at 73 MPH (+i tooth), 76 MPH (+2 teeth), 79 (+3 teeth), 81 (+4 teeth) for the same engine RPM as the original pulley at 70 MPH."

I sure wish you would tell us how many MPH you gained with the 31T sprocket

I just bought these from local shop but doesn't have any box. Same packet i was searching for some info on what is for polishing and what foam is for buffing /waxing. Gonna continue my hunt

Nice job !!!! Damn what a difference!!!!!

😂😂😂 damn Trolls are everywhere!

I came for the oil change tutorial, stayed for the laminar flow 😂

Any oil filter needed ??

Any disadvantage if i dont use glass sealant?

What you think about my ironhead 79 with a 4 gear trans, is 21 front and 51 rear am thinking about 23 front and 47 rear 🤔 i know I need it this confirmed it 💥👊