Відео

It really does come in handy! Glad it was helpful.

That’s a real bummer! Maybe there’s something else that could be causing the issue. Are you getting water in the door?

@@Iannovich Only thing I can think of is the fill tube assembly which includes heater to keep ice from forming in the tube/spigot above the ice tray. If heater is faulty water can freeze and block. This is a $42 part thankfully. But first I might try pulling it out to see if it's frozen. Hate to randomly throw another Part at this. If that isn't the culprit maybe some scary electronics area/control board type thing which is where I'd wash my hands of it. Oddly, the damn thing gave me a few trays of ice today out of the blue. This tends to never last. I think no matter if I get it working or not, it might be time for a Nugget ice maker

@@Iannovich Only on test 97. then it stops or decides to do it 'once in a while'. Weird. There's also scant videos on this darned unit too. Not one out there with clear instruct how to install fill tube assembly.

@@karunald If you go for pull it out and look, let me know if it works. The water 'only on test' (and then randomly) is weird, so I see your logic and you're definitely approaching it right. Nothing worse than throwing part after part at something only to still have to scrap it. Oh, maybe one thing worse. Fixing it and then breaking something else while putting it back together. I did that with an LCD tv that had bad backlighting. Got it all fixed then cracked the screen during reassembly... I went from elated-and-proud to crushed-and-ashamed in the course of about 20 minutes.

Let me know what you think! It's WAY better than the last one I had. I like it really thick and this one absolutely gets me there!

Good question: About 1100 ml.

it was just one side at that point. I did jack it up a bit higher than than angle makes it look, but that jack stand in front is only extended to about a foot or so high.

Glad to help! Danke fürs Zuschauen!

My pleasure! Thanks for watching!

@@mary0308 such a cool little setup, they’re awesome!

Exactly. I have some weird configurations and I’ve still got plenty of slots left.

well that's no good! I think you might have gotten a bad one, unfortunately. I ended up with a second one (the darker colored one) and both work well for me. If you haven't had it very long, I'd definitely take/send it back for either an exchange or a refund. You might want to try that, even if you've had it for a while... worst that could happen is they say no.

@@aabsc lol. I think your house is going to get a lot hotter than you think…

@@Iannovich It was a joke, no circuit could handle even 2 space heaters

@@aabsc yes, of course. My response was a joke as well. Sorry if that wasn’t clear.

Yeah, I agree. It has protections built into it, but folks should still be mindful of what the total draw is of what they're plugging in. Love the idea of a version that has a display for that info!

I appreciate that!

@@CivilApps interesting! I haven’t used it that way, but I don’t see why not and I’m definitely going to give it a try

Please let me know if it works. If yes, I will buy one as I want to use coconut milk in place of animal milk

@@CivilApps will do!

​@@IannovichThank you so much

@@mikemadden yeah, seriously. I can’t believe how deeply I gouged my arm!

nah, even the Ultras don't weigh very much. I do sometimes worry about me being clumsy and snapping USB-C connecters off, but the weight of the watch is no problem.

Glad it was helpful. Thanks for watching!

@@eatdrinkreadrepeat1128 awesome! Thanks for watching!

I don’t use it much either. Sometimes I’ll save it for smoothies (ironically those smoothies often have the yoghurt in them!). My dog enjoys it as well, so sometimes I’ll let him have some. I’ve read that it’s as good for them as for us.

@Iannovich I just thought as you make yogurt you might know if it's still beneficial without the whey in it.

It's already come in handy. For the last week or so I've been having to get up earlier and getting home later and I've been using it to top up while driving :)

My pleasure! thanks for watching!

So glad to hear it!

@@truly5821 you can leave it alone. I usually do. It pops up to ventilate and I _think_ that’s supposed to help it drain faster, but it seems plenty fast enough for me.

I don't think it's strictly necessary. I've tried both ways and I don't think I've seen a difference. I do hold some back before straining most of the time, but I've also used the strained yoghurt as well. I've meant do do some actual a/b testing to see if there's a real difference, but I haven't made that happen yet.

@Iannovich good to know, thank you

It will continue to drain from higher up, but when it does get close to the bottom of the strainer, I'll dump out the accumulated whey. I don't think it will reabsorb if it actually makes it up and over it, but just in case.

sure thing! Email me the details at iannovich@gmail.com

If you're using a strainer like this, you could just not let it strain for as long. I like it super thick. I started doing it that way when I was making a lot of Tzatziki and the extra thickness helped combat the moisture of the cucumbers. I ended up developing a taste (so to speak) for it to be super thick. If your're making the yogurt from scratch, you could heat it for less time and that should keep it from getting too thick. Thanks for watching!

My pleasure! Thanks for watching and happy cruising!

It could be the wiring is close together and the signal is bleeding over. That happened to me until I lowerred the sensitivity. We also completely replaced and rewired our box when we upgraded it for an extra 220v circuit. It doesn’t do that any longer.

@Iannovich but why would it not beep on the correct switch as well? I repeated this test at 3 outlets, and the result was the same - when only one breaker caused beeps, it was not the correct one for the socket. But when I press the GFI button, the correct circuit breaker trips.

Yes, I did rotate them according to Tesla's recommended pattern: Fronts to the rear, then cross the rears to the opposite sides in front. These tires aren't directional, and they're not staggared. Thanks for watching.

Yes! You are right! I had actually done this with the old toner box last time I got the message. Cleaning the contacts didn't help, so I had just removed the old toner (and recycled it). This time I decided to just buy this alternative to the OEM because it was so much cheaper (and cleaner). Great suggestion.

Mine sound surprisingly good. I mostly use them for flights. I accidentally left them behind on a trip earlier this year and was forced to buy a replacement pair at the airport (for some reason I have to have ANC in order to hear in flight entertainment). The new ones (SkullCandy Hesh ANC) were not nearly as good at noise cancellation and I gave them to my son as soon as I got home. I REALLY missed these guys. I've got a new trip coming up next week, so I'll be using these again several times over the next few weeks. I'll report back if I notice any degradation.

My pleasure! hope it helped :)

Yup, I had a 50-50 chance and completely blew it, lol.

it's about a quart.

Couldn't agree more! I had a couple of Cuisinart Grind n Brew models and I liked them, but they didn't have nearly the versatility this one does. It's a keeper.

Yeah, I'm always surprised by the number of cables and chargers that don't actually perform to their specs. I have a video coming where I try a 140w power supply and (spoiler) it doesn't put out more than 96w... even one of the two cables it comes with only works up to 96w (the other _can_ hit 140w if used with another charger though).

My juction box had wiring that was really close together and that was skewing the results unless I turned up (or down) the sensitivity. You can actually see me adjusting it with my thumb in the video. It turns out that that panel was depricated (and apparently has been since around the time it was installed in the 70s. We actually replaced the panel with a brand new panel so that we could install an EV charger on a 60amp circut, and the new panel is dead on.

It came from amazon. It's still going strong, so I'm pleased with it. Here is the link from the description. If you're not in the US, it might not work, but if you let me know I can find a link from the same manufacturer for you. geni.us/6y7b. Heads up! Links provided or mentioned in this video are affiliate links, I will earn a small commission, but only if you make a purchase using them. No extra charges are incurred by you. Thank you!

That is ALWAYS great to hear! Thanks for watching!

That's weird! Sorry for the trouble. The link seems to be working for me. geni.us/97ydV. This one might work better amzn.to/3T8ALgw It's the Cultures For Health Greek Yogurt Starter. This last time I made it I kept the milk at temperature for 15 minutes before letting it cool and it was the best batch yet! Hope those help.

This case has held up WAY better than the official Apple one I have on my work phone. They were both purchased at around the same time and are both used and treated exactly the same. The Apple one has been a heck of a disappointment. It's peeling and looks a mess. This one has some wear to the bottom, but compared to the Apple one, I can't complain at all. The light color isn't even showing any dinginess.

YES! I kept thinking "preston" and I knew that wasn't right. It comes with a Presta adapter, lol. Thanks.

Where are you located that you're seeing it listed for $250? I usually see it as around $99 and I've seen it as a lightening deal lately for as low as $65. We have are lucky enough to have several locations around here that have free DC charging so that we can use the CCS adapter. There are a couple of casinos, a shopping center and a few wineries... my suspicion is that that is why they are limited to 50 kw. They're nice enough to give us the free fast charging, but they don't want it to be toooo fast, so that we continue to shop or play.