Відео

@@michaelthompson4178 The Ceramic Silver was a nice color for sure.

@@KevinShroff Currently, it’s just the exhaust. It may sound different from other videos because it’s inside the shop.

@@jalove7 I bought the set and installed it myself. Hardest part was breaking the bolts/nuts loose.

@@cheesecodm2678 It doesn’t. I set up the camera before I got in the car and started it. I just edited the video to only show it being started.

@@claytonpratesteixeira9812 I’ve been pretty happy with it since I bought it. There isn’t a whole lot of modifications out for it yet, at least in the US market, but it’s slowly growing. I’m looking forward to getting the front splitter, rear diffuser, and the side skirts. Can’t decide on the wing yet. 🤷🏻‍♂️🤣 A stiffer suspension and roll bats are in the list also.

@@mowglig9382 Congratulations! There’s nothing like the feeling of a dream come true. What year?

@@phoenixautodetailingllc3554 2018 RWD Black w/ Red Interior. The only thing I’ve done to it so far is: Custom Straight pipes from the cats back. GFB Blow off valves. HKS Spark Plugs. Fast, Reliable, and Family Friendly. It’s perfect for life.

@@phoenixautodetailingllc3554same congrats to you too. Taking it to the track would be fun, keep us updated.

@@mowglig9382 We’re hoping for the weekend of September 14-15th for the first track event. Just gotta make sure we can get the entry fees in time.

@@rondell2329 It’s not bad as a daily driver. Comfort mode is too laggy, so I drive it in sport mode all the time. I’ve wanted one since they came out and I’m glad I bought it. My wife drives a Charger and there’s a big difference between the two.

Definitely. I'm going to do a test drive on it soon. There's nothing like that v8 Mopar feeling though. But I'm ready for something different

@@rondell2329 I love the rumble of a nice V8. That’s all I had growing up. I bought a new Forte in 2016 and it was the first foreign car I owned. I drove it to Idaho and back several times and really enjoyed it. A big change from my Suburban. When the Stingers came out, I knew I had to have one. 🤣 I bought it used and love it. When I test drive it, it already had cold air intakes installed. I felt like a little kid, and drove it like a teenager showing off for his friends. The sound of the blow off valves still get me every time.

@@chantalsscaleisafibber We use a brush and go in opposite directions. It’s pretty simple and makes it look really nice.

@@phoenixautodetailingllc3554 it looked awesome

I use Jax Wax products, so it would have been their Perfect Cut, Perfect Polish, and Final Finish. If all of the imperfections are minor, I would start out with the Perfect Polish. If that doesn’t work, or there are deeper scratches, I would move to the Perfect Cut.

I really like the Graphene.

You’re welcome.

@phoenixautodetailingllc3554 do you have the brand of lights or where you purchased them?

@@TheBizcuit0426 I don’t remember the brand, but I bought them from Walmart. The mounting hardware is different for many of them, but as long as they are flush mount, you shouldn’t have an issue with mounting them. Just spend a few extra bucks to get the screws intended for metal or you will have issues with them stripping and not holding well.

I mounted them to the metal supports. I drilled holes and screwed the clips to the metal supports and then clipped the lights to them.

@phoenixautodetailingllc3554 I have seen the special light kits that mount to the door. Are these normal shop lights or one of the special kits that allow the door to be rolled up and closed? I have found so many kits for letting the door be up, and they turn on but not with the door down for some reason.

@@TheBizcuit0426 They are normal shop lights and plug in to each other in series. The tricky part was trying to figure out how to plug it in so the garage door could go up and down without pulling the cord.

@phoenixautodetailingllc3554 Great to know its possible. I used the Harbor Freight plug-in LED shops lights. They can run 8 together conjoined, and on EtSy, there are people who make the brackets so they can mount flush so I could install them on my side walls as well.

If you end up making a video showing how you did it. That would get some views as I have looked everywhere and it's not easily found. They all show the kits once the door is rolled up it makes contact for power but not the other way around.

This guy is cooked

Deep fried my guy 😂😂😂😂

It’s been a while, so I had to watch the video again to find out. LOl I used the yellow Hex Logic pad first to remove everything and it worked. But it left a lot of swirl marks. I followed it with the yellow Rupes polishing pad to finish it out.

Thank you.

Awesome question. We use Jax Wax products. We used Jax Interior to clean them and more that likely misted them with the Vent Magic and buffed them with a soft rag. They can be gently polished if necessary to remove light scratches and restore the shine.

@@phoenixautodetailingllc3554 thanks so much for your response and information. I’ll see if these products are available here in the UK (I’m terrified of scratching the piano black). Thanks once again. Appreciated 😊👍😊

@@Martpad A lot of people are. If you have access to compressed air, blow any loose debris off and out of the cracks and crevices. Also, if you have a soft brush (Detailing brush, make up brush, or soft paint brush), mist the panel and gently brush it. Then either use the compressed air, or microfiber towel, to remove the cleaner. As far as cleaners, if you can not get access to Jax Wax products, any good interior detailing cleaner will work good.

@@phoenixautodetailingllc3554 you’re a star ⭐️ and so generous with your time and information. I’ll go google. Thank you very much 😊😊😊

It was a clients vehicle. Don’t remember what year it was.

I have to knob as well only the hybrids come with a knob. Mine is 2023 kia sportage hybrid SX-Prestige. This video this is a 2023 kia as well just isn't a hybrid.

I have an electric one. I think that was just an excuse for him to complain about the first time over a year ago. After the first complaint, we just used the hose for the longest time. He just found everything else he could to complain about. We’re trying to get a building so we can move the business there. Then, I will just power wash my house, driveway, and personal vehicles every week and he won’t have any legitimate reason to complain.

We no longer have the vehicle. We had no issues with it while we had it.

@@phoenixautodetailingllc3554 which issues? I have the same one - please tell more about it. Thanks mate!

I haven’t yet. LOL It’s been a combination of busy and lazy/tired. I’ll try to polish it and see if it will come out. If not the next step would be to wet sand and polish. Hopefully it didn’t cause any damage on the inside. If it did, the only thing to do is replace them.

Asking because the same thing is going on with mine now...I'll try the same

Thank you.

Thornton Chip Tuning.

For the step that lead to this video, I used a yellow Hex Logic pad, and Jax Wax Perfect Cut. It was in rough shape overall from light/medium scratches, water spots, and some oxidation. Thank his combination just cleared the slate, so to speak, so I could get a better look at it.

@@phoenixautodetailingllc3554 they say dodge is the worst paint to correct, and black is definitely one of the hard ones to make look like a mirror but you definitely nailed it. I actually have perfect cut being shipped to my house, can’t wait to try it.

@@reddrum56 Yes, this one was challenging. I have found that German cars, BMW and VW, have been the toughest so far. LOL Jax Wax makes pretty good products. The only time I have been left wanting something more, was when I ran out of their heavier Ultra cut. For a while, it was tough to get more of it.

@@phoenixautodetailingllc3554 what is your go to ceramic coating choice? If you don’t mind me asking

@@reddrum56 I have not started to do ceramic coatings yet. I don’t have an environment/shop that I feel is suitable to guarantee a quality end result. I am currently working from my garage at home, and temperatures and humidity control is non existent.

2.4

That’s awesome. I don’t know if anyone has told you already, but your business has an amazing name. 🤣

@@phoenixautodetailingllc3554 thank you buddy, so does yours 🤣 Hope your well 👍

Yes sir. Imma see what I can do with them. lol

Thank you.

Thank you. Sometimes I get in a hurry and forget the before shots. I’ve also forgot to get the after shots. LOL I appreciate the compliment, and the recommendation.