Відео

how so? What would you have like to see?

@@Leggobrandon40bang good point. Hopefully I won’t have to deal with mold but I didn’t think of that when I put it up

Yes it is! Took a hot minute to get it to where it is. But I’m very happy with it

@@wigidy12 thank you. I try to keep things simple. I get confused easily on complicated projects

@@REVNUMANEWBERN yea. That’s true. But it’s a simple side step for me. And I’m the only one that will use them so it was a sacrifice I decided to make.

@@REVNUMANEWBERN it’s part of the algorithm. Having dead space sound leads to lower views. Gotta appease the YT metrics.

Also. It’s part of the “free” music that YT will let us use. I’m cheap and not making money off my videos so I don’t want to pay for better music.

@@snicks50 I exactly. No more trip hazard

@@DavidWadeDesign no, he means new finished floor will be higher than the existing finished floor that is currently 'level' with the new/raised plywood subfloor.

@@berkut7 yes, that was done intentionally because I put a LVT floating floor on it. I left it higher because I didn't remove the old tile in the rest of the room. it's pretty even when you walk along it. But if it bugs me in the future, I'll rip it all up and do it again and remove the tile under the LVT.

@@coryingman thank you. My wife picked it out so as long as she’s happy with it, I have a warm bed to sleep in. Haha

Thank you. The 1/2 hold small weigh just fine so far. I hung my stairs from it and I have had 0 issue so far. If I need to hag something heavy I screw a 2x4 to the wall and hang the heavy item off of that. That way the weight is distributed more and holding from a single screw

@@AB_thingsDFW also for the corners I did but joints and picked them together. Then out a 2x4 along the seam to keep them flush together.

@@DavidWadeDesign thanks for the ideas. I'm going to follow your corners tip. Will try to make a video on it

@@AB_thingsDFW please do. Let me know when it’s out and I’ll check it out

Manbun says it's all.

They are offset pegs that came with the numbers. They screw into the numbers then press fit into the wood/wall (or whatever you are pointing the numbers to.

@@DavidWadeDesign Thank you!! Just trying to figure out some options for attaching wood projects. I built a small coffee table recently and used hex socket head cap screws for the legs but i see most people using glue more often than any screws on wood.

@@Awkwave yea. It is a simple design. But it has a wide variety of applications. How does your coffee table look?

What is the tool called you cut the metal with? A mitre bandsaw?

@@FloridaMan.84 a.co/d/5NQcUrp. Here is the Amazon link. Not an affiliate link it’s simply a portable metal bandsaw.

Thank you! You too!

@@dericktrx7573 hopefully not any time soon anyway

How? A handrail can be added.

@@sjagain it can. But I like the sleek look of it as it is. I’m the only one uses it so if I ever sell my house I’ll add a rail before my property sells

Thank you!

Thank you

I use the wall as the handrail

That would be a good idea…unfortunately I am not that person.

@@DavidWadeDesign What if you made the existing staircase a bit shorter and had it join a landing with any additional steps needed going at a 90* angle from the long run? The short run would fold down from the wall it is running into? Short set goes down first then long run rests on top of it for continuity and less wobble.

@ that’s not a bad idea. I think the main reason I did it this way was because I didn’t want the step elevation to be too steep. If I were to redo it, I’d probably do something like what you suggested

It’s 3/4” ply wood that is double laminated for thickness. I think it should be fine. Time will tell. If I have to make another staircase video you can come and tell me you told me so.

plywood, flat by design.

I like to live dangerously.

I used 3/4” thick plywood that I double laminated together. So the stairs are just about 1 1/2” thick. Same as the stringers.

Agreed. Needs a landing and a turn for those first two steps.

Yea. I put it there to make it more out of the way. Not realizing it killed the walk-in and walk-out. Oh well. Since I’m the only one to use it, I’ll just have to live with it. But it definitely should be on the other wall to make it easier to use for sure.

​@DavidWadeDesign Naaa... the wall at the bottom is just a good brake. It'll stop the momentum of a tumble. Add some padding to the wall, and you're good to go. 😆

@@supremealpha1 the total cost was around $1550. That includes the base. MDF top, screws, glue, laminate top. Everything. The base by itself was only around $900. But I have $300 in shipping to add to that. The base came from Framing technologies. Cam from Black Tail Studio has a link in one of his videos that they will still apply to your order even though his video was posted a couple years ago. Overall great company and I’ll definitely be using them again in the future.

Ignorant English.

Fun fact. I’ve never been high. That’s just my natural personality. :-)

That is a good idea. When I film a shop tour video, I'll be sure to put some footage of the inside in that video.

Also. On my new video on ductwork and dust collection there is a decent shot of the inside of the shed. If you wanted to check that out.

He should have topped it before cutting it down. I didn’t think it needed to come down because it wasn’t rotten or dying. The company wasn’t licensed or insured. So it’s falling on insurance and they don’t want to help with any of it.

Atleast he ain't begging like the rest of these utubers

There were too many trusses broken and the walls were out of whack. I had to hire a structural engineer to look at the damage and he even said it wasn’t repairable and had to be torn down.

Thanks. It was a lot of fun, but drilling all those holes by hand definitely sucked

Thank you

Colored acrylic pegs

Sorry for the late reply. I don't remember where I got them from exactly, but it was through Alibaba

I used cheap amazon special LED light strips

To diffuse the light

He used a router with a round over bit which creates a nice smooth round over to the holes

Yes, I used a 1/8th inch round over router bit

I ended up buying them from China. The pegs alone were $1000. If I ordered them from the states that price went up to $5000.

How much was everything?

@@hines320 materials were around $1500 for everything. Wood. Pegs. LED lights. Acrylic.

@@DavidWadeDesign thank-you! Thinking about doing this for my son who's Autistic, he saw a huge lite brite and loved it. Thanks for showing hiw to do it!

@@DavidWadeDesign Did you buy longer version and then you cut it?