Відео

It looks lovely. Thank you 😊

Thank you so much for this video. I have an order and I've never done it before. This is exactly what I was looking for. Thanks!

How is this holding up?

On measuring resins what is 80th amount?

Love your method. Thanks so much. 😊 your very thro

Thank you so much for the video on replacing the rollers. I am not taking the machine apart so this is very helpful. Question: How did you get the roller to fit underneath the bar? I am having difficulty getting it underneath. Thanks….❤

I just needed to use the c clamp & it worked. I did get the rubber rollers also for when I need it. Great video!, Thank you!

What size did you use for the lettering?

do you have to use heat and bond or can you use fabric glue??

Thank you so much for this video! You are a life saver!

Thank you so much for your tutorial. I didn’t know that Cricut Maker would have this problem until it happened. I’m grateful that I found your video and I’m going to do it. Thanks AGAIN! 😊

May i ask which heat gun you use please

I was in the MIDDLE of disassembling mine when i saw your video, got it back together and did this instead. THANK YOU!!!!!! used super glue to seal the cut and you'd never know.

Thank you thank you thank you! 🤗

Really appreciate you doing this video. I have different replacement rollers (white) and had thought about doing the same. So now I've cut them and covered the cut with a thin strip of heavy duty tape. It's worked fine for two cuts of many shapes with the green mat and thick card. I've ordered similar rubber rollers and clips to yours as not sure if my ones will stay in place without the clips. Saves huge amount of time opposed to dismantling the whole thing and putting it back together again.

Thank you so much for sharing this video! It worked like a charm! I had purchased the rollers about 3 weeks ago to fix my Cricut machine myself; however, after watching numerous videos on how much effort it will take to dis-assemble and re-assemble the machine, I did not want to take that task on. Therefore, I was considering sending it off to a "Cricut Doctor" I heard about on Reddit; however, I came across your video this morning and literally within 5 minutes of watching it my machine was back up and running. Thanks AGAIN! You're a lifesaver!

You are so smart and a life saver!! I cut my new rolls, used a little crazy glue, clamped the ends so they would stay and some electrical tape to seal the deal! Back in biz! I am really disappointed that cricut doesn't offer a better solution to the issue.

Im going to order some and do this your way best video ive watched. Thanks

Suggestion: can use these as paper weight.

this worked perfectly, thank you so much!

What size width was the ribbon?

Thank you for your video. I finally found just what i was looking for.. lol.. Im up at 4am and hve watched a ton of videos on how to replace these. I already bought the replacements and sat down last night after gathering all the necessary tools and supplies needed to replace them, but after watching idk how many(too many) videos on the full process, im just not comfortable with taking my cricut maker apart to replace them. So yesterday I had the same idea as yours but wasnt sure it would work. And I had searched and searched looking for any video on this method, or hack, and couldn't find any, until finally, (thank goodness) i just came across yours. So im going to give it a try. Thank you very much. P.s. do u think any other tape would work ? Like electrical or some other kind. Just wondering if you think another type would work also or even maybe better? Thank you again.

Beautiful ❤

I like your idea and I think it could work even better if you made your cut on the new roller at a 45° angle across the roller. That would make the seam diagonal instead of in line with the metal pressure roller underneath. It would probably still be a good idea to put tape over the top of the roller to prevent it from spreading apart. I bought the same or at least similar replacement rollers to do mine and was watching a few videos to see if there were any “gotcha’s” I needed to be aware of before starting to work on mine. I’m actually not afraid of taking my machine apart because I used to be a service tech on similar types of machines. Most people don’t have that sort of background and very well could do more harm than good attempting this repair. I think I’ll try your method out and make my cut at 45° and see how it works out. If it doesn’t hold up, there are 4 more rollers in the package so I could still do the repair by disassembly.

Thank you so much for this video. I too am not comfortable with taking my machine apart. I've had to put so many projects on hold because of this issue. You're a lifesaver!!!!!!!!

Hi Mrs. Anna that looks absolutely freaking amazingly GORGEOUS!! You did a heck of a job on it. Which it brings me to my question for you that I have and I'm praying you can help me out with some pointers and advice if you dont mind. I lost my mom back in August 2021 due to Covid-19. Well she didn't want to be buried, she wanted to be cremated and have her ashes thrown into the beach because she absolutely LOVED the beach. I think she loved it so much that she loved the beach more than my brother and I lol. (Not really). She had a thing for sharks teeth, sand dollars, star fish and sea shells. Well I can't spread her ashes in the ocean for about another 10 more years because my brother is in prison and he was in there when she passed away and I just can't spread her ashes in the ocean without my brother being with me. So I would like to make an urn made out of sea shells, sand dollars, sharks teeth and starfish with epoxy resin and put the ashes inside and be able to see the ashes from the outside. Any tips or advice on how I could be successful at this? This is also my first epoxy resin project.

What are the stones for the dolphin

This is so beautiful, i loved it❤ I've got 3 pieces of acrylic sheets left unused and was very confused what to make out of it but now I'm gonna try this, thanks to you for such a cute tutorial.❤

Quick and Easy Cricut Roller Fix. Mine has lasted without any problems.

I wanted to do one of those beach themed ones as I near the beach. I just happened to turn you on and LOOK AT THE BEAUTIFUL BEACH PICTURE you were doing. So glad I got to watch you do it. I am ready to tackle it myself.

What did you charge for this bow?

Would clear caulk work to seal with ?

they are so cute exited to see the tutorial❤

beautiful!!

why not just tape the picture instead of tracing? jw

Thank you very much you are very talented.

Whats the purpose of the cover that you place over it when you have finished? Love the finished project

Are the flowers actually laid upside down when you’re doing them?

Beautiful 🤩

These are beautiful. Quick question though! Ive noticed tiny bubbles. How can we avoid having these?

What type of glue you used

The first time I tried it, my coaster was too sticky after curing and I think that’s maybe I either did it makes it well enough or I was off by a couple ounces with one of them or some thing, but the second time I tried it. I mix the glitter, and with the resin before pouring, and it didn’t come out sticky, but it came out rough because of the sparkles/confetti on the top. Did I put too much sparkle in?

I had a heck of a time keeping my flowers down. They keep popping up especially the ones with stems on it. I babysat that piece for hours. After all that with another pour a big bubble flirted up under a leaf. Oh well.

Why didn’t you cover all the glass?

I love it!! What size and font did you use for the school initials?

🤭 Promo_SM

I have that frame I made rock people so beautiful what your making ❤

Great job!! Im in the procsee kf customizing cheer bows and making drawstring bwckpacks for my daughter's cheer team. I came here for inspiration. ❤

How big did you cut the name

Where did you buy the glass I have been trying to find them everywhere by the way it’s beautiful ❤