Відео

@@Heartbreakz That in the video is a Vevor but for Direct Drive it is too shaky! I wouldn't recommend it. I then bought the ones from Next Level Racing F-GT. The link are in the description!

Hi KB3K first of all thank you for your track Minesotta Corsa I also indicated you in the description! But if you don't like it, I can delete it. No problem 😌

@g-wolfgameplays how can I not like it, however you choose to enjoy my tracks is whatever makes you happy. Appreciate the support brother!

@@iamkillball3000 Thanks bro, that means a lot to me! And thank you for noticing it at all 👍🏽

@@g-wolfgameplays tbh I'm always searching for videos on my maps lol

@@VRSTLPerformance In the video it is that of Vevor but for CSL DD it was too shaky so I switched to Next Level Racing F-GT! Link are in the Description…!

Yes, these are all mods!

Congratulations! That's a nice Christmas present. Cool thing 👍🏽

Hi! Yes, this is the CSL DD 5 NM version. The QR1 I have is smooth so far, had no problems! The new base comes with the new QR2 so unfortunately I can't say anything about it. At the moment they have the bundle back on offer almost $400 instead of $550! Whichever you decide, Moza or Fanatec are both great 👍🏽

@@g-wolfgameplays Im going with the QR2 bundle 8NM. And im probably going to buy the kit to make it all aluminium to make sure its fine

@@omarmunroe1420 That in the video is a Vevor but for Direct Drive it is too shaky! I wouldn't recommend it. I then bought the ones from Next Level Racing F-GT. The link are in the description!

@g-wolfgameplays thanks much

Yes this is a CSL DD with 5 nm!

@ nice drifting!

@ Thanks Bro 👊🏻

@@Nowiseguy1 Thank you for your Support 🙏

Hi 🙋‍♂️ Das rütteln und wackeln soll einem die Boden Beschaffenheit übermitteln also es ist ganz normal ! Man muss sogar etwas Kraft anwenden da merkt man das FFB (Forcefeedback) Brauchst keine Bedenken zu haben also es ist also alles in Ordnung 👌 Wünsche dir noch sehr viele schöne Runden auf der Strecke !!

@g-wolfgameplays ok danke also kann ich da ruhig ohne bedenken wirklich Kraft anwenden ja ?

I didn't say I did!

Steering wheel and base are optimal only the cockpit rig is too shaky for that so I bought one from Next Level Racing F-GT!

@ but any creaking in n the wheel. Like does it feel cheap

Yes indeed! The Classic Wheel has a diameter of 35 cm. The P1 V1 has 30 cm!

Hi 🙋‍♂️ yes because I still had a wheel stand from my Logitech G923. Then I bought CSL DD and saved up for another cockpit! Then bought me the cockpit of Next Level Racing F-GT. But I wrote in the description!

@ NLR is always a good choice for the rig, for your next upgrade if you were to do it would probably a 10-16nm DD wheel than a aluminum profile rig, but what you have setup right now is above and beyond the casual racers setup, cheers.

@@whurvs In fact, you are absolutely right

I have no idea where you saw it with 360 degrees but in the settings it says 600 degrees! Have several settings depending on what kind of car and whether drift just run! But I think everyone has to be able to decide for themselves and how well they get along with their attitudes. Thank you for your opinion 🙏

@g-wolfgameplays i don't know i just saw you spin the wheel 360° but im just sayin you are using an expensive wheel to not use it to its full potential thats what i mean

this version unfortunately not

It is definitely heavier than the P1V2. The P1V2 seems like a toy to me. Universal Hub V2 + ClubSport Wheel Classic 2 V2 is more robust and feels like it's from a real car. So I'm very satisfied!

Sis you notice a difference in ffb and handling it when going to heavier and also bigger diameter wheel? I am considering a full custom build on podium like hub or go with the csl universal v2 with r330 wheel. ​Or get this qr2 that unlocks ffb and can mount any wheel to it. I have macro box for most functions and pretty much never use paddles when doing most my driving cause I mostly drift or rip traffic and usual in sequential or h shifter cars. @@g-wolfgameplays

Lenkbereich: 900 Grad von Anschlag zu Anschlag Halleffekt-Lenksensor Force-Feedback mit zwei Motoren mit TRUEFORCE Überhitzungsschutz. So steht es bei Logitech ! Also als ich es noch hatte war es schon gut aber wie du schon sagst wenn man über unebene Belag fährt oder offroad zum Beispiel Forza Horizon 5 rattert es ganz dolle. Das FFB ist max. 2.3 nm glaube ich ! Also wenn ich ehrlich sein soll würde 100€ mehr drauf legen und ein Direkt Drive Bundle holen! Hoffe ich konnte etwa behilflich sein!

No. They said this on the steam page. It’s own thing.

Schon komisch das es auf der Verpackung stand und wie ich denn Treiber installiert habe das da Logitech G 923 Trueforce erkannt wurde !🤔 Leider habe ich die G 923 nicht mehr habe sie durch einen CSL DD von Fanatec ersetzt!

@@rodseukeng here is a Short Video about my Settings ua-cam.com/video/AZPvMrTWCjs/v-deo.htmlsi=hAUgEbxLoDWQkd0A

@@rodseukeng thanks dude 🙏

Hello! So I can't complain at all. Since I have it just over a year I have never had any problems with it! It may be that some have broken, but this can also happen with other brand names. But I don't want to push anyone to do anything, everyone should decide for themselves what they tend to do 😉

Das sollte man auch unten am Lenkrad anschließen und das Kabel vom Lenkrad an deinen PC !!

@@g-wolfgameplaysdanke hatte es genau 5 minuten dannach gesehen jetzt geht es

Thank you for your support!! This is the new map of Perma. You can find the link in the description! 🙏

@@g-wolfgameplays thank you I haven’t checked!!

@@g-wolfgameplays thanks im going to try it tomorrow

Thanks for the sub

@@WondefullComment This one in the video is a wheel stand from Vevor! But it's too shaky for CSL DD. I got one from Next Level Racing F-GT.

Vevor

@@strakee8644 Fanatec CSL DD Steering Wheel P1 V2 Wheelstand Vevor : amzn.eu/d/hwZm48f but renewed with a Next Level Racing F-GT : amzn.eu/d/gmA1xNm

@@g-wolfgameplays thanks man

Good choice!

Hi buddy!! At CarX Street in the settings under Control scroll all the way down FFB should be there! But the actual setting should be made in the Fanatec Control Panel. ​​Sen 500 FFB 61% FFS Linear NDP 50% NFR off NIN off INT 6 FEI 60 FOR 80% SPR 70% DPR 70%

⁠ Sen 500 FFB 61% FFS Linear NDP 50% NFR off NIN off INT 6 FEI 60 FOR 80% SPR 70% DPR 70% Fanatec Control Panel

@@g-wolfgameplays thank you so much

Hello! So far I have no problems! Maybe you have set it too much in the Fanatec Control Panel the FFB. You have to adapt it according to your needs. Hope I was able to help you!

@@g-wolfgameplays could you give me your settings so I could work from those by any chance?

@@GForceGaming-mr1lkdoes your wheel shake?

@@GForceGaming-mr1lk Some time ago I had made a video about my settings for Assetto Corsa! I have taken over these Fanatec settings with CarX Street PC! ua-cam.com/video/AZPvMrTWCjs/v-deo.htmlsi=d8vSG0RNXu0NAH_u

@@g-wolfgameplays so are these settings for AC or CarX street? Thank you for all your help btw

With this stand from Vevor I had to drill three holes again so that it fit. Then with the groove nuts you push them accordingly into the grooves of the CSL and fastened with screws from below! Actually, this stand was meant for my old g923. It fit exactly there.

Thank you for your comment! I'll consider it.

@@SlaterDRA I would say USD! Unfortunately, I can't say exactly because I paid for it in euros. Come from Germany 🇩🇪!

The brand is Vevor!

@@g-wolfgameplays thank you for that 👍🏻

I'm very happy if it helped you!

This one in the video is a wheel stand from Vevor! But it's too shaky for CSL DD. I got one from Next Level Racing F-GT.

@@rxckyiskuul6829 In the video it is that of Vevor but for CSL DD it was too shaky so I switched to Next Level Racing F-GT!